Inner diameter profiling | Holding Tools for I.D. Tuning - Turning Tools - Configure and purchase | MISUMI

SANDVIK

Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	40 ～ 63	Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	-	-

Ordinarie pris (exklusive MOMS):

503.21 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STFCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 55	Inner diameter profiling	Right-hand / Left-hand	-	25 ～ 63	-	-	-

Ordinarie pris (exklusive MOMS):

242.84 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

CoroTurn XS Insert Bar For Grooving CXS-..G

[Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingGroove width: 1.5 mm

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
-	4.2 ～ 7.2	Inner diameter profiling	Right-hand / Left-hand	-	27.3 ～ 57.8	-	4 ～ 7	-

Ordinarie pris (exklusive MOMS):

59.94 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR / L-X

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	22 ～ 50	Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

Ordinarie pris (exklusive MOMS):

383.32 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

ISCAR

End Face Grooving Blade SGFFH-R/L

[Features] A blade for flange grooving with a minimum machining diameter of 35 to 150 mm and a projection length of 20 to 30 mm.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
Other	35 ～ 150	Inner diameter profiling	Right-hand / Left-hand	Clamp-on	-	7°	-	20 ～ 35

Ordinarie pris (exklusive MOMS):

231.44 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

ISCAR

End Face Grooving Holder HFHR/L-3T

[Features] A holder for flange grooving with a minimum machining diameter of 25 to 75 mm and a projection length of 12 to 25 mm.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
Other	25 ～ 75	Inner diameter profiling	Right-hand / Left-hand	Cable clamp	140 ～ 150	-	-	12 ～ 25

Ordinarie pris (exklusive MOMS):

193.73 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

KYOCERA

A-SDUC-AE Type Excellent Bar (Profiling)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	27 ～ 32	Inner diameter profiling	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	20 ～ 25	～5.5

Ordinarie pris (exklusive MOMS):

146.50 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

KYOCERA

S-SDUC-A Type Steel Bar (Profile Machining)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	32	Inner diameter profiling	Right-hand	Screw-on	250	7°	25	Up to 4

Ordinarie pris (exklusive MOMS):

187.58 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

KYOCERA

E-SDUC-A Carbide Anti-Vibration Bar (Profiling)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	27 ～ 32	Inner diameter profiling	Right-hand	Screw-on	165 ～ 300	7°	20 ～ 25	~7

Ordinarie pris (exklusive MOMS):

530.94 €～

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

A-SDQC-AE Type Excellent Bar (Profiling)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	30	Inner diameter profiling	Left-hand	Screw-on	250	-	25	～5.5

Ordinarie pris (exklusive MOMS):

156.88 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

S-SDQC-A Type Steel Bar (Profile Machining)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	13	Inner diameter profiling	Left-hand	Screw-on	140	-	10	Up to 4

Ordinarie pris (exklusive MOMS):

86.50 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

E-SDQC-A Carbide Anti-Vibration Bar (Profiling)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	13	Inner diameter profiling	Left-hand	Screw-on	160	-	10	~7

Ordinarie pris (exklusive MOMS):

237.29 €

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

KYOCERA

S...STWP-E Type Excellent Bar (Profiling)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: T (triangle); compatible clearance angle: positive 11° (P); clamping method: screw on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	32	Inner diameter profiling	Right-hand	Screw-on	270	-	25	Up to 3

Ordinarie pris (exklusive MOMS):

114.94 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

S-SVPC (B)-A Type Steel Bar (Undercutting and Profiling)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	18 ～ 31	Inner diameter profiling	Left-hand	Screw-on	150 ～ 250	5°	12 ～ 25	Up to 4

Ordinarie pris (exklusive MOMS):

116.55 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

KYOCERA

A-SVUC (B)-AE Type Excellent Bar (Undercutting)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	40	Inner diameter profiling	Left-hand	Screw-on	250	5°	32	～5.5

Ordinarie pris (exklusive MOMS):

219.75 €

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

KYOCERA

S-SVUC (B)-A Type Steel Bar (Undercutting)

[Features] Machining applications: Inside diameter, through hole, profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B), positive 7° (C); clamping method: screw-on (S).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	16	Inner diameter profiling	Right-hand / Left-hand	Screw-on	150	5°	12	Up to 4

Ordinarie pris (exklusive MOMS):

110.31 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

KYOCERA

S...PDUN11 Type (Profiling)

[Features] Machining applications: Inner diameter, through hole, flange, blind hole; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamping method: pin lock (P).

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	27 ～ 40	Inner diameter profiling	Right-hand	Lever lock	180 ～ 250	-	20 ～ 32	Up to 3

Ordinarie pris (exklusive MOMS):

140.38 €～

Ordinarie avsändningsdatum:

9 arbetsdagar

Konfigurera

SANDVIK

CORO-TURN 107 Carbide Vibration-Proof Boring Bit for Positive Tips

For turning slim parts with inner and outer diametersInsertion exchange with high repeatability improves productivity and achieves high quality

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	18	Inner diameter profiling	Left-hand	Screw-on	150 ～ 180	7°	12	120

Ordinarie pris (exklusive MOMS):

841.09 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR / L-R

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	15 ～ 22	Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	7°	10 ～ 16	60 ～ 96

Ordinarie pris (exklusive MOMS):

476.57 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-ERX-R

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For back boring machining.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	22 ～ 27	Inner diameter profiling	Right-hand / Left-hand	Screw-on	200 ～ 250	7°	16 ～ 20	24～64 ～ 30~80

Ordinarie pris (exklusive MOMS):

208.98 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR / L-X

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For back boring machining.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	33	Inner diameter profiling	Left-hand	Screw-on	312.2	7°	25	15–40

Ordinarie pris (exklusive MOMS):

277.34 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	20 ～ 32	Inner diameter profiling	Left-hand	Screw-on	200 ～ 300	7°	16 ～ 25	64 ～ 100

Ordinarie pris (exklusive MOMS):

198.02 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	20 ～ 32	Inner diameter profiling	Right-hand / Left-hand	Screw-on	200 ～ 300	7°	16 ～ 25	64 ～ 100

Ordinarie pris (exklusive MOMS):

198.02 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-STFCR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	11	Inner diameter profiling	Left-hand	Screw-on	100	7°	8	9 to 24

Ordinarie pris (exklusive MOMS):

198.00 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	22	Inner diameter profiling	Left-hand	Screw-on	200	7°	16	24～64

Ordinarie pris (exklusive MOMS):

200.41 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	22	Inner diameter profiling	Right-hand / Left-hand	Screw-on	200	7°	16	64

Ordinarie pris (exklusive MOMS):

812.02 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

CoroTurn 107, Boring Tool Bit for Turning

[Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling·High tool rigidity ensures stable machining operations even with workpieces with long protrusions[Applications]·For inner diameter turning operations

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	32 ～ 50	Inner diameter profiling	Right-hand / Left-hand	Screw-on	300	5°	25 ～ 40	100 ～ 160

Ordinarie pris (exklusive MOMS):

266.01 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L-E

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	22	Inner diameter profiling	Left-hand	Screw-on	200	7°	16	24～64

Ordinarie pris (exklusive MOMS):

211.52 €

Ordinarie avsändningsdatum:

14 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
V (35° Diamond-Shaped)	27 ～ 33	Inner diameter profiling	Left-hand	Screw-on	250 ～ 300	5°	20 ～ 25	30~80 ～ 100

Ordinarie pris (exklusive MOMS):

242.49 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

CoroTurn 111, Boring Tool Bit for Turning

[Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions·Easy-fix sleeve for quick and accurate core height adjustment[Applications]·For inner diameter turning operations

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	10 ～ 32	Inner diameter profiling	Left-hand	Screw-on	125 ～ 300	11°	8 ～ 25	12～32 ～ 37.5～100

Ordinarie pris (exklusive MOMS):

200.41 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L-ER

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	18 ～ 20	Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	11°	12 ～ 16	18～48 ～ 24～64

Ordinarie pris (exklusive MOMS):

200.41 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR / L-ER

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	15 ～ 20	Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 200	11°	10 ～ 16	60 ～ 96

Ordinarie pris (exklusive MOMS):

476.57 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER

[Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	15 ～ 18	Inner diameter profiling	Right-hand / Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	60–100 ～ 120

Ordinarie pris (exklusive MOMS):

842.30 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	15 ～ 32	Inner diameter profiling	Right-hand / Left-hand	Screw-on	125 ～ 300	11°	10 ～ 25	15–40 ～ 37.5～100

Ordinarie pris (exklusive MOMS):

200.41 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR / L

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	22	Inner diameter profiling	Left-hand	Screw-on	204.6	11°	16	24～64

Ordinarie pris (exklusive MOMS):

200.41 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR / L-R

[Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	8.5 ～ 20	Inner diameter profiling	Right-hand / Left-hand	Screw-on	80 ～ 200	11°	6 ～ 16	9 to 24 ～ 32

Ordinarie pris (exklusive MOMS):

200.41 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R

[Features]A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit. The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter. For inner-diameter turning (bore cutting) operations with longer protrusions. For suppressing chattering.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	13 ～ 16	Inner diameter profiling	Left-hand	Screw-on	150 ～ 180	11°	10 ～ 12	100 ～ 120

Ordinarie pris (exklusive MOMS):

842.30 €～

Ordinarie avsändningsdatum:

8 arbetsdagar

Konfigurera

SANDVIK

CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°

[Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	20 ～ 50	Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

Ordinarie pris (exklusive MOMS):

366.84 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

CoroTurn SL, 570 Type T-Max P, Head for Back Boring

[Features]Cutting head for inner diameter turning with a replaceable head. Excellent insert clamping rigidity due to the double clamping. Quick head changes are possible, reducing downtime. Inner diameter turning operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	50	Inner diameter profiling	Left-hand	Cable clamp	-	0°	40	20

Ordinarie pris (exklusive MOMS):

479.94 €

Ordinarie avsändningsdatum:

14 arbetsdagar

Konfigurera

SANDVIK

CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR / L

[Features]An interchangeable-head-type cutting head for inner diameter cutting. Being a double clamp gives it excellent insert-clamping rigidity. The heads can be quickly changed out, helping reduce down time. Inner-diameter turning (bore cutting) operations.

Mer information

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
D (55° Diamond-Shape)	40	Inner diameter profiling	Left-hand	Cable clamp	-	0°	32	20

Ordinarie pris (exklusive MOMS):

462.06 €

Ordinarie avsändningsdatum:

14 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STWCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 50	Inner diameter profiling	Right-hand / Left-hand	-	24.2 ～ 54.4	-	-	-

Ordinarie pris (exklusive MOMS):

245.86 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STTCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	20 ～ 60	Inner diameter profiling	Right-hand / Left-hand	-	25 ～ 63	-	-	-

Ordinarie pris (exklusive MOMS):

253.73 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Cartridge CoroTurn 107 Screw Clamp STSCR / L

Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
T (Triangle)	25 ～ 50	Inner diameter profiling	Right-hand	-	34.1 ～ 57.2	-	-	-

Ordinarie pris (exklusive MOMS):

253.73 €

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SANDVIK

Boring Tool Bit T-Max P Lever Clamp S...-PDUNR / L

[Features]An easy-handling inner-diameter boring tool bit with excellent repeatability. The use of internal coolant improves the handling of cutting chips and gives the inserts a longer service life. Supports inner-diameter turning (bore cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

Mer information