Drill Bits（Tool Material Type：Carbide）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Carbide Step Drill Bit, With Custom Dimensions
MISUMI
[Features]
・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.Configure nowMin. Shipping Days ： 9 Days -
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
MISUMI
[Features]
-Ideal for high-precision small-diameter drilling
-The shank diameter is standardised at 3 mm and enables high-precision clamping
-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.- Volume Discount
Configure nowStarting from∗ ： 38.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Aqua Drill EX Flat AQDEXZ
NACHI(FUJIKOSHI)
Countersinking drill with good drilling performance. Well suited for slanted surfaces and pilot drilling for tapping.Configure nowStarting from∗ ： 88.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Carbide Micro Revolution Drill for Stainless Steel, MRS-GDL
OSG
Long carbide drill bit with small diameter for machining stainless steel. Machining stainless steel provides stable durability.- Volume Discount
Configure nowStarting from∗ ： 33.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Solid Carbide Drill 2D Type AD-2D
OSG
[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 37.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Solid Semi-Long Drill
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.- Volume Discount
Configure nowStarting from∗ ： 20.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Micro Drill Long Tip
ATOM
Small diameter, deep hole machining drill. (Min. diameter φ0.03), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.- Volume Discount
Configure nowStarting from∗ ： 38.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Solid Carbide Drill 3D Type With Oil Hole ADO-3D
OSG
[Features]
· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 65.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide Drill 5D Type with Oil Hole ADO-5D
OSG
[Features]
· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 85.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Regular
MISUMI
[Features]
-Designed with small core diameter to improve chip evacuation
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.- Volume Discount
Configure nowStarting from∗ ： 22.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Drill, Straight Shank / Stub
MISUMI
[Features]
-Multi-faceted uncoated carbide drill bit for a wide range of applications
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 11.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Drill, Straight Shank / Regular
MISUMI
[Features]
-Multi-faceted uncoated carbide drill bit for a variety of applications
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 13.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade
MISUMI
(DLC-SC-SDR)
-Drilling and countersinking holes for screws can be done in one operation, resulting in highly efficient machining (countersink type)
-Since relief holes can be drilled at the same time as drilling pilot holes for power strips, it is ideal for drilling pilot holes in thick panels that require relief (single-cut type).- Volume Discount
Configure nowStarting from∗ ： 84.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type
MISUMI
[Features]
・Introducing a long shank type with custom pilot diameter / large diameter dimensions to the lineup of customizable step drill bits with helical flutes.Configure nowMin. Shipping Days ： 9 Days -
- Promotional pricing
Carbide Stub Type for Small Diameter / Precision Machining WX-MS-GDS
OSG
Achieves high accuracy and high efficiency very small diameter drilling of precision mechanical components, iInformation and communication components, etc.- Volume Discount
Configure nowStarting from∗ ： 31.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 30.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Micro Drill, for Stainless Steel
ATOM
Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.Configure nowStarting from∗ ： 39.15 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Gun Drill 25 X D EB100 5646
GUHRING
A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.Configure nowStarting from∗ ： 268.71 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI(FUJIKOSHI)
Flat drill with a lower neck length of 10D and good hole drilling performance.Configure nowStarting from∗ ： 106.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D
OSG
[Features]
· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work.
3D type with oil hole- Volume Discount
Configure nowStarting from∗ ： 65.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 152.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
MISUMI
[Features]
-Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium
-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible
-Wide flute design promotes chip flow.- Volume Discount
Configure nowStarting from∗ ： 72.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub
MISUMI
[Features]
-Excellent chip evacuation and sharpness due to high spiral shape
-Designed for frequent pre-drilling of M4 to M12 metric coarse holes
-2 types of step angles are available for chamfering and cutting
-Reduces chamfering process and achieves high drilling efficiency. (DLC-SC-SDR)
-Relief holes can be machined simultaneously when drilling pilot holes for bolts (DLC-SF-SDR).- Volume Discount
Configure nowStarting from∗ ： 101.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN
OSG
Achieves High Cost Performance in High Speed Hole Drilling of Cast Aluminum, Die Cast Aluminum, Malleable Aluminum etc. Used Extensively in Automobile / Airplane Manufacturing- Volume Discount
Configure nowStarting from∗ ： 18.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSDH Drill for Small Diameter High-Hardness Processing
NS TOOL
Allows drilling into 65 HCR quenched steel with small diameter drills. Achieves low variation in hole diameter and stable long product life.- Volume Discount
Configure nowStarting from∗ ： 60.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Drill Carbide for High Hardness Steel (From 70HRC)
OSG
Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.- Volume Discount
Configure nowStarting from∗ ： 102.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
OSG
Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole Specifications- Volume Discount
Configure nowStarting from∗ ： 159.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).- Volume Discount
Configure nowStarting from∗ ： 35.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
HPD Hyper Burnishing Drill AH10
ASAHI TOOLS
Recommended conditions twice the speed and feeding speed of the straight blade burnishing drill, maintains the same dimensional accuracy and surface roughness as the straight blade burnishing drill, dramatically reduces thrust and increases tool life
Supports screw pilot hole (cutting, rolling tap metric coarse type class 2) sizes- Volume Discount
Configure nowStarting from∗ ： 89.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Gun Drill 50 X D EB100 5647
GUHRING
A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.Configure nowStarting from∗ ： 334.25 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
Micro Gun Drill EB100 5024
GUHRING
The tube is a solid carbide type integrated with the head, which increases torsional strength and suppresses vibration during machining. The screwdriver diameter is metric to support oil hole holders for machining centers.Configure nowStarting from∗ ： 289.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Micro Drill, Type-N 3899
GUHRING
Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.- Volume Discount
Configure nowStarting from∗ ： 49.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Micro Drill Reamer, Type-N 701
GUHRING
[Features]
· Blade diameter tolerance is +0, -0.004, suitable for high precision small diameter hole drilling.Configure nowStarting from∗ ： 36.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2D Type Indexable Drill, P2D
OSG
Indexable drills that can stably perform hole drilling with 2D depth.Configure nowStarting from∗ ： 316.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 189.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
OSG
[Features]
· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work.
5D type with oil hole- Volume Discount
Configure nowStarting from∗ ： 85.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Throw-Away Drill, Standard GEN2 0 / 0.5 Series Tip
NGK SPARK PLUG
[Features]
Tool Material: Carbide, powder metal high-speed steel
Coating / surface treatment: For TiCN, TiN, general steel (AlCrN, etc.)Configure nowStarting from∗ ： 161.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Double Margin Drill, Regular
MISUMI
[Features]
-Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling
-Supports a wide range of materials, from general steel to stainless steel
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
MISUMI
[Features]
-Capable of high feed and high speed cutting from general steel to stainless steel
-The adoption of a wavy edge achieves outstanding sharpness and strength and promotes chip evacuation
-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape and R-type thinning
-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder
-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 49.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Straight Shank / Stub Model
MISUMI
[Features]
-Multi-faceted carbide drill for a wide range of applications
-TiAlN coating enables high-speed cutting
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the drill, its performance, pricing, etc.- Volume Discount
Configure nowStarting from∗ ： 21.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
MISUMI
[Features]
-MIAutomatic steelI-Original shape ideal for EN 1.4016 Equiv. machining
-Designed with a helix angle of 38° near the tip and 20° near the shank
-The 20° section has a large core diameter for improved tool durability
-Superfine carbide alloy provides excellent abrasion resistance and enables high speed machining
-125° tip angle and combined helix angle improve cutting performance.- Volume Discount
Configure nowStarting from∗ ： 113.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Burnishing Drill, Straight Model
MISUMI
[Features]
-Enables high-precision drilling of aluminium without pre-drilling
-Tip diameter can be specified in units of 0.01mm and flute length in units of 0.1mm
.Configure nowMin. Shipping Days ： 8 Days -
Carbide Drill for Aluminum Machining
MISUMI
Frequently used standard sizes are offered at affordable pricesConfigure nowStarting from∗ ： 12.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Aqua Drill Hard AQDH
NACHI(FUJIKOSHI)
Highly efficient processing of 50-68 HRC tempered steel is possible.- Volume Discount
Configure nowStarting from∗ ： 30.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Aqua Micro Drill AQMD
NACHI(FUJIKOSHI)
Capable of stable drilling of small diameter holes. Well suited for machining of materials ranging from green timber to high hardness steel.- Volume Discount
Configure nowStarting from∗ ： 39.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | ATOM | ATOM | OSG | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | ATOM | ATOM | GUHRING | NACHI(FUJIKOSHI) | OSG | NGK SPARK PLUG | MISUMI | MISUMI | OSG | NS TOOL | OSG | OSG | ATOM | ASAHI TOOLS | GUHRING | GUHRING | GUHRING | GUHRING | OSG | NACHI(FUJIKOSHI) | OSG | NGK SPARK PLUG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product Series | TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model | Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type | Carbide Stub Type for Small Diameter / Precision Machining WX-MS-GDS | TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular | DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub | Carbide Drill High Hardness Steel with Oil Hole (From 55HRC) | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular | TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular | |||||||||||||||||||||||||||||||||||||
| Starting from∗ | - | 38.08 € *Unit price with basic configuration Volume Discount | 88.02 € *Unit price with basic configuration | 33.20 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 37.21 € *Unit price with basic configuration Volume Discount | 20.37 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 38.88 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 65.10 € *Unit price with basic configuration Volume Discount | 85.18 € *Unit price with basic configuration Volume Discount | 22.49 € *Unit price with basic configuration Volume Discount | 11.46 € *Unit price with basic configuration Volume Discount | 13.09 € *Unit price with basic configuration Volume Discount | 84.87 € *Unit price with basic configuration Volume Discount | - | 31.40 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 30.72 € *Unit price with basic configuration Volume Discount | 39.15 € Special price *Unit price with basic configuration Promotional pricing | 268.71 € *Unit price with basic configuration | 106.97 € *Unit price with basic configuration | 65.10 € *Unit price with basic configuration Volume Discount | 152.32 € *Unit price with basic configuration | 72.95 € *Unit price with basic configuration Volume Discount | 101.88 € *Unit price with basic configuration Volume Discount | 18.82 € *Unit price with basic configuration Volume Discount | 60.22 € *Unit price with basic configuration Volume Discount | 102.10 € *Unit price with basic configuration Volume Discount | 159.00 € *Unit price with basic configuration Volume Discount | 35.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 89.00 € *Unit price with basic configuration Volume Discount | 334.25 € *Unit price with basic configuration | 289.48 € *Unit price with basic configuration | 49.81 € *Unit price with basic configuration Volume Discount | 36.35 € *Unit price with basic configuration | 316.60 € *Unit price with basic configuration | 189.23 € *Unit price with basic configuration | 85.18 € *Unit price with basic configuration Volume Discount | 161.00 € *Unit price with basic configuration | 78.36 € *Unit price with basic configuration Volume Discount | 49.75 € *Unit price with basic configuration Volume Discount | 21.46 € *Unit price with basic configuration Volume Discount | 113.09 € *Unit price with basic configuration Volume Discount | - | 12.77 € *Unit price with basic configuration | 30.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 39.65 € Special price *Unit price with basic configuration Promotional pricingVolume Discount |
| Min. Shipping Days | 9 Days | 5 Days | 5 Days | Same day | 5 Days | Same day | Same day | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 9 Days | Same day | 6 Days | Same day | 24 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 24 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 8 Days | 5 Days | Same day | Same day |
| Hole diameter (drill diameter) D(mm) | - | 0.38 ～ 2.7 | 0.5 ～ 20 | 0.44 ～ 3 | 2 ～ 12 | 0.3 ～ 13 | 0.03 ～ 3 | 2 ～ 20 | 2 ～ 20 | 0.3 ～ 13 | 0.5 ～ 8 | 1 ～ 7.5 | 3.4 ～ 10.3 | - | 0.19 ～ 5 | 0.3 ～ 13 | 0.1 ～ 3 | 2.5 ～ 12 | 3 ～ 20 | 2.8 ～ 20 | 29 ～ 35 | 5 ～ 12 | 6.8 ～ 10.3 | 3 ～ 13 | 0.1 ～ 1 | 2 ～ 12 | 3.3 ～ 12 | 0.03 ～ 3 | 2.8 ～ 20 | 2.5 ～ 8 | 1.2 ～ 3.2 | 0.1 ～ 3 | 0.25 ～ 1.4 | 21 ～ 33.5 | 1 ～ 12 | 2 ～ 20 | - | 1 ～ 11 | 3 ～ 13 | 1 ～ 8 | 3 ～ 10 | 0 | 1 ～ 10.5 | 2 ～ 12 | 0.2 ～ 1.99 |
| Groove Length L(mm) | - | 6 ～ 12 | 1.65 ～ 90 | 6 ～ 36 | 14 ～ 55 | 8 ～ 70 | 0.6 ～ 40 | 12 ～ 100 | 18 ～ 160 | 3 ～ 77 | 3 ～ 37 | 12 ～ 69 | 21 ～ 72 | - | 1.2 ～ 26 | 15 ～ 120 | 1 ～ 15 | 85 ～ 360 | 14 ～ 90 | 17 ～ 100 | - | 44 ～ 71 | 48 ～ 72 | 25 ～ 76 | 0.2 ～ 2 | 12 ～ 76 | 32 ～ 96 | 0.3 ～ 25 | 20 ～ 110 | 155 ～ 440 | 45 | 1.2 ～ 12 | 1.9 ～ 9.5 | - | 18 ～ 216 | 18 ～ 140 | - | 12 ～ 71 | 28 ～ 77 | 6 ～ 37 | 28 ～ 61 | 0 | 6 ～ 43 | 12 ～ 51 | 2.5 ～ 15 |
| work material | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Stainless Steel[◎] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎] | - | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | General Steel[○] / Cast Iron[○] / Titanium[○] | Cast Iron[◎] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | High Hardness Steel[◎] | Quenched and tempered steel[◎] / High Hardness Steel[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | - | - | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | General Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Stainless Steel[◎] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Aluminum[◎] | High Hardness Steel[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Overall Length L(mm) | - | 38 | 47 ～ 145 | 38 ～ 66 | 62 ～ 102 | 40 ～ 149 | 38 ～ 65 | 66 ～ 165 | 70 ～ 225 | 38 ～ 124 | 20 ～ 79 | 34 ～ 109 | 73 ～ 136 | - | 38 ～ 64 | 75 ～ 250 | 38 ～ 45 | 115 ～ 420 | 100 ～ 250 | 66 ～ 165 | - | 82 ～ 118 | 104 ～ 136 | 59 ～ 128 | 45 | 42 ～ 120 | 78 ～ 156 | 38 ～ 50 | 60 ～ 170 | 185 ～ 485 | 90 ～ 100 | 38 | 25 | 121 ～ 160 | 66 ～ 276 | 70 ～ 205 | - | 45 ～ 118 | 66 ～ 124 | 26 ～ 79 | 60 ～ 120 | 40 ～ 60 | 26 ～ 89 | 44 ～ 108 | 38 ～ 47 |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | Straight Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | Straight Shank | Straight Shank | Straight Shank | End Mill Shank | End Mill Shank / Straight Shank | Straight Shank | End Mill Shank | - | End Mill Shank | End Mill Shank / Straight Shank | - | End Mill Shank | Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank / Straight Shank | - | - | - | - | End Mill Shank | Straight Shank | End Mill Shank / Straight Shank | - | End Mill Shank | End Mill Shank | Straight Shank | End Mill Shank | End Mill Shank | Straight Shank | End Mill Shank / Straight Shank | End Mill Shank |
| Coating Y/N | N/A | Available | Available | Available | Available | N/A | N/A | Available | Available | Available | N/A | N/A | Available | N/A | Available | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available | Available | Available | N/A | Available | N/A | Available | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | Available |
| Coating Type | - | TiAlN | Other | Other | Other | Non-Coated | Non-Coated | Other | Other | TiAlN | - | - | TiAlN | - | Other | Non-Coated | For General Steels (AlCrN, etc.) | Other | Other | Other | For General Steels (AlCrN, etc.) | TiAlN | DLC | Non-Coated | TiAlN | Other | Other | For General Steels (AlCrN, etc.) | Non-Coated | Other | - | TiAlN | - | Non-Coated | For General Steels (AlCrN, etc.) | Other | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | - | - | Other | Other |
| With/without Oil Hole | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available / N/A | Available | - | N/A | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | N/A | N/A | Available | Available | Available | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.128
- 0.13
- 0.135
- 0.14
- 0.143
- 0.145
- 0.147
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.432
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.632
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.5X10D
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.6×10D
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.8×10D
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2×10D
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.1×10D
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.2×10D
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.3×10D
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.383
- 2.39
- 2.4
- 2.4×10D
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.5×10D
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.6×10D
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.7×10D
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.779
- 2.78
- 2.79
- 2.8
- 2.8×10D
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.9×10D
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3×10D
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.1×10D
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.2×10D
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.3×10D
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.35 / 4.50
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.40 / 4.60
- 3.4×10D
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.5×10D
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.58
- 3.59
- 3.6
- 3.6×10D
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.70 / 5.00
- 3.7×10D
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.8×10D
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.9×10D
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4×10D
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.1×10D
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.2×10D
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.25 / 5.70
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.30 / 5.80
- 4.3×10D
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.4×10D
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.5×10D
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.6×10D
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.65 / 5.90
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.7×10D
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.8×10D
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.9×10D
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.00 / 6.80
- 5×10D
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.10 / 6.90
- 5.1×10D
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.2×10D
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.30 / 7.20
- 5.3×10D
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.4×10D
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.50 / 7.40
- 5.5×10D
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.55 / 7.50
- 5.558
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.6×10D
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.7×10D
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.8×10D
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.9×10D
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.97
- 6
- 6×10D
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.1×10D
- 6.13
- 6.15
- 6.2
- 6.2×10D
- 6.23
- 6.25
- 6.3
- 6.3×10D
- 6.33
- 6.35
- 6.35 (¼")
- 6.37
- 6.375
- 6.4
- 6.4×10D
- 6.43
- 6.45
- 6.5
- 6.5×10D
- 6.528
- 6.53
- 6.55
- 6.6
- 6.60 / 8.90
- 6.6×10D
- 6.63
- 6.65
- 6.7
- 6.7×10D
- 6.73
- 6.746
- 6.75
- 6.75 / 9.10
- 6.76
- 6.8
- 6.8×10D
- 6.83
- 6.85
- 6.85 / 9.20
- 6.9
- 6.90 / 9.30
- 6.9×10D
- 6.91
- 6.93
- 6.95
- 6.97
-
7～7.98
- 7
- 7.00 / 9.50
- 7×10D
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.1×10D
- 7.13
- 7.14
- 7.145
- 7.15
- 7.2
- 7.2×10D
- 7.23
- 7.25
- 7.25 / 9.80
- 7.3
- 7.30 / 9.80
- 7.3×10D
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.4
- 7.40 / 9.80
- 7.4×10D
- 7.43
- 7.45
- 7.49
- 7.5
- 7.5×10D
- 7.52
- 7.53
- 7.54
- 7.541
- 7.55
- 7.6
- 7.6×10D
- 7.63
- 7.65
- 7.67
- 7.7
- 7.7×10D
- 7.73
- 7.75
- 7.8
- 7.8×10D
- 7.83
- 7.85
- 7.9
- 7.9×10D
- 7.93
- 7.938
- 7.94
- 7.94 to 8.49
- 7.95
- 7.96
- 7.97
- 7.98
-
8～8.96
- 8
- 8×10D
- 8.00 / 10.80
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.1×10D
- 8.13
- 8.15
- 8.2
- 8.2×10D
- 8.23
- 8.25
- 8.3
- 8.3×10D
- 8.33
- 8.334
- 8.35
- 8.4
- 8.4×10D
- 8.43
- 8.433
- 8.45
- 8.5
- 8.50 to 8.99
- 8.5×10D
- 8.50 / 11.50
- 8.50000000000001
- 8.53
- 8.55
- 8.58
- 8.6
- 8.6×10D
- 8.60 / 11.60
- 8.61
- 8.63
- 8.65
- 8.7
- 8.7×10D
- 8.70 / 11.70
- 8.73
- 8.733
- 8.75
- 8.8
- 8.8×10D
- 8.80000000000001
- 8.83
- 8.84
- 8.85
- 8.9
- 8.9×10D
- 8.90000000000001
- 8.93
- 8.95
- 8.96
-
9～9.97
- 9
- 9.00 to 9.49
- 9×10D
- 9.00 / 11.80
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.1×10D
- 9.129
- 9.13
- 9.15
- 9.2
- 9.2×10D
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.3
- 9.3×10D
- 9.30 / 12.60
- 9.30000000000001
- 9.33
- 9.34
- 9.347
- 9.35
- 9.36
- 9.38
- 9.4
- 9.4×10D
- 9.40000000000001
- 9.43
- 9.45
- 9.5
- 9.50 to 9.99
- 9.5×10D
- 9.50 to 11.07
- 9.50000000000001
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.58
- 9.6
- 9.6×10D
- 9.60000000000001
- 9.63
- 9.65
- 9.7
- 9.7×10D
- 9.70000000000001
- 9.73
- 9.75
- 9.8
- 9.8×10D
- 9.80000000000001
- 9.83
- 9.85
- 9.9
- 9.9×10D
- 9.90000000000001
- 9.92
- 9.921
- 9.93
- 9.95
- 9.96
- 9.97
-
10～10.96
- 10
- 10×10D
- 10.00 - 10.49
- 10.00 to 10.49
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.1×10D
- 10.13
- 10.15
- 10.2
- 10.2×10D
- 10.23
- 10.25
- 10.25 / 13.80
- 10.26
- 10.3
- 10.3×10D
- 10.30 / 13.80
- 10.32
- 10.33
- 10.35
- 10.4
- 10.4×10D
- 10.40 / 13.80
- 10.43
- 10.45
- 10.49
- 10.5
- 10.5×10D
- 10.50 - 10.99
- 10.50 to 10.99
- 10.50 / 13.80
- 10.53
- 10.55
- 10.6
- 10.6×10D
- 10.63
- 10.65
- 10.7
- 10.7×10D
- 10.71
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.8×10D
- 10.80 / 14.60
- 10.83
- 10.85
- 10.9
- 10.9×10D
- 10.93
- 10.95
- 10.96
-
11～11.96
- 11
- 11×10D
- 11.00 - 11.49
- 11.00 to 11.49
- 11.00 / 14.90
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.1×10D
- 11.10 to 12.95
- 11.11
- 11.113
- 11.12
- 11.13
- 11.14
- 11.15
- 11.2
- 11.2×10D
- 11.20 / 15.10
- 11.22
- 11.23
- 11.24
- 11.25
- 11.3
- 11.3×10D
- 11.33
- 11.34
- 11.35
- 11.36
- 11.38
- 11.4
- 11.4×10D
- 11.43
- 11.45
- 11.5
- 11.5×10D
- 11.50 - 11.99
- 11.50 to 11.99
- 11.50 / 15.50
- 11.509
- 11.51
- 11.53
- 11.55
- 11.56
- 11.6
- 11.6×10D
- 11.63
- 11.65
- 11.7
- 11.7×10D
- 11.73
- 11.75
- 11.8
- 11.8×10D
- 11.83
- 11.85
- 11.9
- 11.9×10D
- 11.908
- 11.91
- 11.93
- 11.95
- 11.96
-
12～12.98 to 17.65
- 12
- 12×10D
- 12.00 - 12.49
- 12.00 to 12.49
- 12.00 to 12.99
- 12.00 / 15.80
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.10 / 16.30
- 12.2
- 12.25
- 12.25 / 16.50
- 12.3
- 12.304
- 12.4
- 12.5
- 12.50 - 12.99
- 12.50 to 12.99
- 12.50 / 16.90
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.95
- 12.96
- 12.98 to 17.65
-
13～13.95
- 13
- 13.00 - 13.49
- 13.00 to 13.49
- 13.00 to 13.99
- 13.096
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.487
- 13.49
- 13.5
- 13.50 - 13.99
- 13.50 to 13.99
- 13.50 / 17.80
- 13.55
- 13.6
- 13.65
- 13.7
- 13.75
- 13.8
- 13.89
- 13.891
- 13.9
- 13.95
-
14～14.96
- 14
- 14.00 to 14.49
- 14.0～14.5
- 14.00 - 14.99
- 14.00 to 14.99
- 14~16
- 14.00 / 18.90
- 14.1
- 14.10 / 19.00
- 14.2
- 14.25
- 14.25 / 19.20
- 14.275
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.50 to 14.99
- 14.50 / 19.60
- 14.55
- 14.6
- 14.6～15.5
- 14.68
- 14.684
- 14.69
- 14.7
- 14.75
- 14.8
- 14.9
- 14.95
- 14.96
-
15～15.95
- 15
- 15.00 - 15.99
- 15.00 to 15.99
- 15.08
- 15.083
- 15.1
- 15.10 / 19.80
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.48
- 15.5
- 15.50 to 17.65
- 15.55
- 15.6
- 15.6～16.5
- 15.7
- 15.75
- 15.8
- 15.87
- 15.875
- 15.88
- 15.9
- 15.95
-
16～16.9
- 16
- 16.00 - 16.99
- 16.00 to 16.99
- 16.08
- 16.1
- 16.13
- 16.2
- 16.25
- 16.27
- 16.271
- 16.3
- 16.4
- 16.5
- 16.5~19.5
- 16.55
- 16.6
- 16.6～17.5
- 16.662
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
-
17～17.9
- 17
- 17.00 - 17.99
- 17.00 to 17.99
- 17.07
- 17.1
- 17.2
- 17.25
- 17.3
- 17.4
- 17.45
- 17.46
- 17.463
- 17.5
- 17.50 / 19.80
- 17.53 to 24.38
- 17.55
- 17.6
- 17.6～18.5
- 17.7
- 17.75
- 17.8
- 17.86
- 17.9
-
18～18.9
- 18
- 18.00 - 18.99
- 18.00 to 18.99
- 18.00 to 19.99
- 18.1
- 18.2
- 18.25
- 18.258
- 18.26
- 18.3
- 18.35
- 18.4
- 18.5
- 18.6
- 18.6～19.5
- 18.65
- 18.654
- 18.7
- 18.75
- 18.8
- 18.9
-
19～19.95
- 19
- 19.00 - 19.99
- 19.00 to 19.99
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.45
- 19.5
- 19.55
- 19.6
- 19.6～20.5
- 19.7
- 19.75
- 19.8
- 19.84
- 19.9
- 19.95
-
20～20.9
- 20
- 20.00 - 20.99
- 20.00 to 20.99
- 20.00 to 21.99
- 20~23.9
- 20.1
- 20.2
- 20.24
- 20.25
- 20.3
- 20.4
- 20.5
- 20.6
- 20.6～21.5
- 20.62
- 20.625
- 20.64
- 20.7
- 20.75
- 20.8
- 20.9
-
21～21.9
- 21
- 21.00 - 21.99
- 21.00 to 21.99
- 21.03
- 21.1
- 21.2
- 21.25
- 21.3
- 21.4
- 21.43
- 21.5
- 21.6
- 21.6～22.5
- 21.7
- 21.75
- 21.8
- 21.83
- 21.83 to 24.38
- 21.9
-
22～22.9
- 22
- 22.00 - 22.99
- 22.00 to 22.99
- 22.00 to 23.99
- 22.1
- 22.2
- 22.22
- 22.225
- 22.23
- 22.25
- 22.3
- 22.4
- 22.5
- 22.6
- 22.6～23.5
- 22.62
- 22.7
- 22.75
- 22.8
- 22.9
-
23～23.9
- 23
- 23.00 - 23.99
- 23.00 to 23.99
- 23.02
- 23.1
- 23.2
- 23.25
- 23.3
- 23.4
- 23.42
- 23.5
- 23.6
- 23.6～24.5
- 23.7
- 23.75
- 23.79
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.00 - 24.99
- 24.00 to 24.99
- 24.00 to 25.99
- 24.1
- 24.2
- 24.21
- 24.25
- 24.3
- 24.4
- 24.41 to 35.05
- 24.5
- 24.5/24.7
- 24.6
- 24.6～25.5
- 24.61
- 24.7
- 24.75
- 24.8
- 24.9
-
25～25.9
- 25
- 25.00 to 25.50
- 25.00 - 25.99
- 25.1
- 25.2
- 25.25
- 25.3
- 25.4
- 25.5
- 25.6
- 25.6～26.5
- 25.7
- 25.75
- 25.8
- 25.9
-
26～26.99
- 26
- 26.00 - 26.99
- 26.00 to 28.99
- 26.1
- 26.19
- 26.2
- 26.25
- 26.3
- 26.4
- 26.5
- 26.5/26.7
- 26.59
- 26.6
- 26.6～27.5
- 26.65
- 26.7
- 26.75
- 26.8
- 26.9
- 26.97
- 26.975
- 26.99
-
27～27.9
- 27
- 27.00 - 27.99
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.6～28.5
- 27.7
- 27.75
- 27.78
- 27.8
- 27.9
-
28～28.9
- 28
- 28.00 - 28.99
- 28.1
- 28.2
- 28.25
- 28.3
- 28.4
- 28.5
- 28.57
- 28.575
- 28.58
- 28.6
- 28.6～29.5
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.00 - 29.99
- 29.00 to 31.99
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.56
- 29.6
- 29.6～30.5
- 29.65
- 29.7
- 29.8
- 29.9
-
30～30.8
- 30
- 30.00 - 30.99
- 30.00 to 35.05
- 30.1
- 30.14
- 30.15
- 30.2
- 30.3
- 30.5
- 30.6～31.5
- 30.7
- 30.8
-
31～31.8
- 31
- 31.00 - 33.00
- 31.2
- 31.3
- 31.5
- 31.6～32.0
- 31.7
- 31.75
- 31.8
-
32～32.8
- 32
- 32.00 to 35.00
- 32.15
- 32.2
- 32.3
- 32.5
- 32.7
- 32.8
-
33～33.5
- 33
- 33.325
- 33.5
-
34～34.925
- 34
- 34.36 to 47.80
- 34.5
- 34.925
-
35～35.5
- 35
- 35.5
-
36～36.91
- 36
- 36~43
- 36.5
- 36.91
-
37～37.7
- 37
- 37.5
- 37.7
-
38～38.5
- 38
- 38.1
- 38.5
-
39～39.675
- 39
- 39.5
- 39.67
- 39.675
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.275
- 41.5
-
42～42.85
- 42
- 42.5
- 42.84
- 42.85
-
43～43.5
- 43
- 43.5
-
44～44.8
- 44
- 44~52
- 44.45
- 44.5
- 44.8
-
45～45.5
- 45
- 45.5
-
46～46.99 to 65.28
- 46
- 46.5
- 46.99 to 65.28
-
47～47.63
- 47
- 47.5
- 47.625
- 47.63
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52～52.5
- 52
- 52.5
-
53～53.975
- 53
- 53~63
- 53.5
- 53.975
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.2
- 55.5
-
56～56.5
- 56
- 56.5
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.325
- 60.5
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.38 to 89.08
- 62.5
-
63～63.5
- 63
- 63.5
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.5
-
68～68.5
- 68
- 68.5
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.5
- 71
- 71.5
-
72～72.5
- 72
- 72.5
-
73～73.5
- 73
- 73.5
-
74～74.5
- 74
- 74.5
-
75
-
76
-
77
-
78
-
79～79.50
- 79
- 79.50
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87～87.76 to 114.48
- 87
- 87.76 to 114.48
-
88
-
89
-
90
-
91
-
92
-
93
-
94～94.50
- 94
- 94.50
-
95～95.50
- 95
- 95.50
-
96
-
97
-
98
-
99
-
100
-
103
-
105
-
110
-
115
-
120
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1,000
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.05
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.05
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.25
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.5
- 29
- 29.3
- 29.4
- 29.5
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.4
- 32
- 32.3
- 32.4
-
33～33.8
- 33
- 33.5
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46～46.5
- 46
- 46.5
-
47
-
48
-
49～49.5
- 49
- 49.5
-
50
-
51
-
52～52.5
- 52
- 52.5
-
53
-
54
-
55～55.5
- 55
- 55.5
-
56
-
57
-
58～58.5
- 58
- 58.5
-
59
-
60
-
61～61.5
- 61
- 61.5
-
62
-
63～63.4
- 63
- 63.4
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66
-
67～67.5
- 67
- 67.1
- 67.5
-
68
-
69
-
70～70.5
- 70
- 70.5
-
71～71.7
- 71
- 71.7
-
72
-
73～73.5
- 73
- 73.5
-
74
-
75
-
76～76.8
- 76
- 76.5
- 76.8
-
77
-
78
-
79～79.5
- 79
- 79.5
-
80
-
81～81.4
- 81
- 81.4
-
82～82.5
- 82
- 82.5
-
83
-
84
-
85～85.5
- 85
- 85.4
- 85.5
-
86
-
87
-
88～88.5
- 88
- 88.5
-
89
-
90～90.1
- 90
- 90.1
-
91
-
92～92.5
- 92
- 92.5
-
93
-
94～94.7
- 94
- 94.7
-
95
-
96
-
97
-
98～98.8
- 98
- 98.8
-
99
-
100
-
101
-
102
-
103～103.4
- 103
- 103.4
-
104
-
105
-
106
-
107
-
108～108.4
- 108
- 108.4
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
140
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
188
-
189
-
190
-
191
-
193
-
194
-
195
-
196
-
197
-
198
-
200
-
201
-
205
-
206
-
207
-
208
-
209
-
210
-
212～212.77
- 212
- 212.77
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
227
-
228
-
230
-
231
-
232
-
234
-
235
-
239
-
240
-
242
-
245
-
246
-
247
-
248
-
249.63
-
250
-
252
-
253
-
254
-
255
-
257
-
258
-
260～260.15
- 260
- 260.15
-
262
-
263
-
264
-
265
-
267
-
270
-
272
-
274
-
275
-
276
-
277
-
278
-
280
-
281.77
-
282
-
285
-
287
-
290
-
292
-
295
-
298
-
300
-
302
-
305
-
310
-
315
-
318
-
320
-
321
-
322
-
323～323.63
- 323
- 323.63
-
325
-
327
-
330
-
337
-
339.15
-
340
-
343
-
350
-
355
-
360
-
370
-
372
-
385
-
400
-
402
-
432
-
440
-
450
-
460
-
500
-
512
-
550
-
600
-
692
-
700
-
800
-
860
-
1030
-
-
work material
-
Tool Material Type
-
Overall Length L(mm)
-
Shank Type
-
Coating Y/N
- Available
- N/A
-
Coating Type
-
With/without Oil Hole
Brand
-
- GUHRING (81)
- NACHI(FUJIKOSHI) (45)
- OSG (36)
- ATOM (20)
- DIJET (14)
- NGK SPARK PLUG (13)
- IWATA TOOL (11)
- NS TOOL (10)
- OKAZAKI SEIKO (6)
- WIDIN (5)
- 7 LEADERS (4)
- TOYO DRILL (4)
- SANDVIK (4)
- UNION TOOL (4)
- KYOWA SEIKO (3)
- DIXI (2)
- OMIKOGYO (2)
- ASAHI TOOLS (1)
- EIKOSHA (1)
- FUKUDA (1)
- RYOKO SEIKI (1)
- WIDIA (1)
- HOZAN (0)
- MAKITA (0)
- ALPEN (0)
- METABO (0)
- BICTOOL (0)
- ESCO (0)
- ISHIHASHI (0)
- KYOCERA (0)
- THE CUT (0)
- TWININGS (0)
CAD data type
-
- 2D
- 3D
Categories related to Drill Bits
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.