Carbide Drills（Coating Y/N：Available Page 2）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Solid Carbide Drill 4D Type AD-4D
OSG
[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 43.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Solid Carbide Drill 15D Type With Oil Hole ADO-15D
OSG
[Features]
· Carbide 15D type drill with both high tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holes- Volume Discount
Configure nowStarting from∗ ： 129.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide Drill 20D Type With Oil Hole ADO-20D
OSG
[Features]
· Carbide 20D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holes- Volume Discount
Configure nowStarting from∗ ： 148.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide Drill 30D Type With Oil Hole ADO-30D
OSG
[Features]
· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesConfigure nowStarting from∗ ： 156.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 168.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS Coated Carbide Composite Spiral Drill, Stub Model
MISUMI
[Features]
-Designed with a 30° helix angle near the tip and 20° near the shank
-The 20° section has a large core diameter for improved tool durability
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.- Volume Discount
Configure nowStarting from∗ ： 96.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
MISUMI
[Features]
-Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously
-Supports a wide range of materials, from general steel to stainless steel
-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 55.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition- Volume Discount
Configure nowStarting from∗ ： 57.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
MISUMI
[Features]
-The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-The use of triple rake and R-type thinning achieves high centripetal force
-Designed with larger core diameter than TAC-ESDBA to improve durability
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 43.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
MISUMI
By applying three rake + R thinning, it demonstrates a high level of afferent.- Volume Discount
Configure nowStarting from∗ ： 50.93 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
MISUMI
[Features]
-Corner radius treatment suppresses chipping
-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow
-High centripetal force is achieved by using three chip and R thinning
-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 40.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
MISUMI
[Features]
-Capable of high feed and high speed cutting from general steel to stainless steel
-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning
-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder
-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 42.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Capable of high feed and high speed cutting from general steel to stainless steel
-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation
-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning
-Suppresses chipping by adopting chamfer treatment on the shoulder
-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 111.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
MISUMI
[Features]
-Capable of high feed and high speed cutting from general steel to stainless steel
-Adopting a fluted cutting edge achieves outstanding sharpness and strength and promotes chip evacuation
-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning
-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder
-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 37.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Stub
MISUMI
[Features]
-Designed with small core diameter to improve chip evacuation
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 23.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Supports a wide range of materials, from general steel to stainless steel
-Achieves excellent strength by adopting a straight cutting edge
-Demonstrates high centripetal force by using three chip and X-type thinning
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.- Volume Discount
Configure nowStarting from∗ ： 78.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Straight Shank / Regular
MISUMI
[Features]
-Multi-faceted carbide drill for a wide range of applications
-TiAlN coating enables high-speed cutting
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 23.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Long Drill, Straight Shank
MISUMI
Carbide long drill that achieves the high efficiency deep-hole drilling- Volume Discount
Configure nowStarting from∗ ： 100.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub
MISUMI
[Features]
-Weak helix and large core diameter improve tool rigidity
-Achieves excellent strength by using a straight cutting edge
-Cutting edge chipping is suppressed by corner radius machining, and cracks at the bottom of blind holes in workpieces are also suppressed
-Ideal for machining high hardness steel from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties.- Volume Discount
Configure nowStarting from∗ ： 62.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular
MISUMI
[Features]
-Weak helix angle and high core diameter improve the rigidity of the tool
-Achieves excellent strength by using a straight cutting edge
-Ideal for machining high hardness steels from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 58.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular
MISUMI
[Features]
-Weak spiral angle and high core diameter improve tool rigidity
-Achieves excellent strength by using a straight cutting edge
-Ideal for machining high hardness steels from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 55.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
MISUMI
A small radius type of the high-hardness steel series- Volume Discount
Configure nowStarting from∗ ： 43.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model
MISUMI
[Features]
-Designed with a helix angle of 38° near the tip and 20° near the shank
-The 20° section has a large core diameter for improved tool durability
-120° tip angle and combined helix angle improve durability when machining aluminium.- Volume Discount
Configure nowStarting from∗ ： 159.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Coated Carbide Drill for Aluminum Machining, Regular
MISUMI
[Features]
-The DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for machining non-ferrous metals such as aluminium and copper
-The high helix shape provides excellent chip evacuation and sharpness
-The size range is suitable for drilling pilot holes for plastic processing with mould taps where precision is difficult to control
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, scope of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 87.13 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Aqua Drill 3-Flute AQD3F
NACHI(FUJIKOSHI)
Adopts three blade with excellent cutting balance. Adopt three blade with excellent cutting balance.Configure nowStarting from∗ ： 38.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill EX Oil Hole 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Stable wet machining, can be MQL machining. For high efficiency drilling up to 5 times the drill diameter.Configure nowStarting from∗ ： 120.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill Regular AQDR
NACHI(FUJIKOSHI)
Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.- Volume Discount
Configure nowStarting from∗ ： 87.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill with Bottom Blade 3-Flute AQDED3F
NACHI(FUJIKOSHI)
For opening core holes or high precision boring. Achieves high efficiency machining with excellent positioning correction ability.Configure nowStarting from∗ ： 100.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill EX Regular AQDEXR
NACHI(FUJIKOSHI)
Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.Configure nowStarting from∗ ： 113.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill FC AQDFC
NACHI(FUJIKOSHI)
Ideal for long-life processing of FC, FCD and low carbon steel.Configure nowStarting from∗ ： 104.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill EX Stub AQDEXS
NACHI(FUJIKOSHI)
Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.- Volume Discount
Configure nowStarting from∗ ： 95.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DLC Regular Drill DLCDR
NACHI(FUJIKOSHI)
High speed wet processing and dry processing of aluminum alloy is possible.Configure nowStarting from∗ ： 52.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
DLC Micro Drills DLCMD
NACHI(FUJIKOSHI)
High speed wet processing and dry processing of aluminum alloy is possible. Aluminum drill for small diameter hole.- Volume Discount
Configure nowStarting from∗ ： 37.54 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Aqua Drill EX Oil Hole 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Stable wet machining, can be MQL machining. For high efficiency drilling up to 3 times the drill diameter.Configure nowStarting from∗ ： 120.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Aqua Drill EX Oil Hole 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Stable wet machining, can be MQL machining. For high efficiency drilling up to 8 times the drill diameter.- Volume Discount
Configure nowStarting from∗ ： 127.62 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Aqua Drill Stub AQDS
NACHI(FUJIKOSHI)
Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.Configure nowStarting from∗ ： 53.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Diamond-Coated Super Hard D-GDN
OSG
Excellent power of course against aluminum alloys, but especially against high silicon aluminum alloys for a extremely short-life carbide drillConfigure nowStarting from∗ ： 94.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Extra Long Type Carbide with Oil Hole for High Hardness Mold Materials FTO-H-GDXL
OSG
Achieves a stable and long tool life and high efficiency in 20D ultra-deep hole machining of high hardness mold material (45 ~ 55HRC)Configure nowStarting from∗ ： 227.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS
OSG
The processing of ultra-deep hole of 10d ~ 20D in hardened steel, which could not be achieved only by electrical discharge machining, is now possible with high accuracy, while significant reduction in the total drilling time is achieved.Configure nowStarting from∗ ： 67.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Stub Type for High Hardness Steel FH-GDS
OSG
Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.Configure nowStarting from∗ ： 52.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Medium Type Carbide for High Hardness Steel FH-GDN
OSG
Developed For Crafting Small Diameter Holes in Hardened Steel And Shows its Best Performance When Crafting Deep (Approx. 7D) HolesConfigure nowStarting from∗ ： 57.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide, Very Small Diameter Drill 10D Type, UVM-DRL-10D
OSG
By using carbide materials, it has high hardness and high modulus of elasticity, which enables drilling of extremely small holes in general steel, heat-treated steel and high hardness steel.Configure nowStarting from∗ ： 106.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Very Small Diameter Drill Leading Drill UVM-LDS
OSG
Collaboration with UVM-DRL enables high precision drillingConfigure nowStarting from∗ ： 153.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
UTDSX UT Micro Coat, Unimax Drill, Short Blade
UNION TOOL
[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· A high rigidity short blade is optimal for high precision machining and also for pilot hole processingConfigure nowStarting from∗ ： 19.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
NSMD Micro Drills
NS TOOL
Realizes standardization from tip diameter φ 0.01. Pioneering a New Area for Hole Drilling with Drills- Volume Discount
Configure nowStarting from∗ ： 50.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | WIDIA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | NS TOOL |
| Product Series | TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes) | TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular | TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model | TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub | TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular | DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model | Extra Long Type Carbide with Oil Hole for High Hardness Mold Materials FTO-H-GDXL | 3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS | ||||||||||||||||||||||||||||||||
| Starting from∗ | 43.71 € *Unit price with basic configuration Volume Discount | 129.55 € *Unit price with basic configuration Volume Discount | 148.48 € *Unit price with basic configuration Volume Discount | 156.60 € *Unit price with basic configuration | 168.85 € *Unit price with basic configuration | 96.26 € *Unit price with basic configuration Volume Discount | 55.10 € *Unit price with basic configuration Volume Discount | 57.87 € *Unit price with basic configuration Volume Discount | 43.07 € *Unit price with basic configuration Volume Discount | 50.93 € *Unit price with basic configuration Volume Discount | 40.48 € *Unit price with basic configuration Volume Discount | 42.01 € *Unit price with basic configuration Volume Discount | 111.36 € *Unit price with basic configuration Volume Discount | 37.87 € *Unit price with basic configuration Volume Discount | 23.14 € *Unit price with basic configuration Volume Discount | 78.69 € *Unit price with basic configuration Volume Discount | 23.12 € *Unit price with basic configuration Volume Discount | 100.26 € *Unit price with basic configuration Volume Discount | 62.95 € *Unit price with basic configuration Volume Discount | 58.66 € *Unit price with basic configuration Volume Discount | 55.64 € *Unit price with basic configuration Volume Discount | 43.70 € *Unit price with basic configuration Volume Discount | 159.56 € *Unit price with basic configuration Volume Discount | 87.13 € *Unit price with basic configuration Volume Discount | 38.41 € *Unit price with basic configuration | 120.87 € *Unit price with basic configuration | 87.80 € *Unit price with basic configuration | 100.73 € *Unit price with basic configuration | 113.17 € *Unit price with basic configuration | 104.47 € *Unit price with basic configuration | 95.75 € *Unit price with basic configuration | 52.71 € *Unit price with basic configuration | 37.54 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 120.16 € *Unit price with basic configuration | 127.62 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 53.04 € *Unit price with basic configuration | 94.07 € *Unit price with basic configuration | 227.50 € *Unit price with basic configuration | 67.60 € *Unit price with basic configuration | 52.37 € *Unit price with basic configuration | 57.45 € *Unit price with basic configuration | 106.94 € *Unit price with basic configuration | 153.29 € *Unit price with basic configuration | 19.21 € *Unit price with basic configuration | 50.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount |
| Min. Shipping Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day |
| Hole diameter (drill diameter) D(mm) | 2 ～ 20 | 3 ～ 12 | 3 ～ 12 | 3.5 ～ 10 | 1.5 ～ 20 | 3 ～ 12 | 3 ～ 13 | 2 ～ 13 | 3 ～ 13 | 3 ～ 13 | 3 ～ 13 | 3 ～ 8 | 4.2 ～ 7 | 3 ～ 13 | 0.3 ～ 6 | 3 ～ 13 | 1 ～ 8 | 3 ～ 10 | 3 ～ 13 | 3 ～ 13 | 3 ～ 13 | 0.8 ～ 3 | 5 ～ 6.5 | 5.52 ～ 11.38 | 3 ～ 16 | 1 ～ 16 | 3.7 ～ 10 | 3 ～ 12 | 2.1 ～ 16 | 2 ～ 12 | 2 ～ 16 | 2 ～ 12 | 0.5 ～ 1.9 | 3 ～ 16 | 3 ～ 16 | 4 ～ 12.5 | 2 ～ 12 | 6 ～ 10 | 1 ～ 3 | 0.3 ～ 2 | 0.3 ～ 2 | 0.02 ～ 0.08 | 0.05 | 0.3 ～ 2 | 0.01 ～ 0.1 |
| Groove Length L(mm) | 20 ～ 101 | 55 ～ 215 | 70 ～ 270 | 116 ～ 330 | 18 ～ 148 | 20 ～ 55 | 20 ～ 71 | 12 ～ 77 | 20 ～ 60 | 28 ～ 77 | 16 ～ 77 | 20 ～ 41 | 24 ～ 53 | 16 ～ 78 | 2 ～ 28 | 28 ～ 77 | 12 ～ 75 | 60 ～ 140 | 20 ～ 60 | 20 ～ 77 | 16 ～ 78 | 6 ～ 27 | 44 ～ 53 | 41 ～ 71 | 16 ～ 80 | 8 ～ 128 | 24 ～ 60 | 16 ～ 51 | 17 ～ 96 | 15 ～ 73 | 8 ～ 55 | 15 ～ 73 | 6 ～ 15 | 17 ～ 80 | 33 ～ 176 | 22 ～ 51 | 18 ～ 76 | 140 ～ 230 | 5 ～ 15 | 1.6 ～ 12 | 2.5 ～ 18 | 0.22 ～ 0.88 | 0.075 | 1.5 ～ 10 | 0.1 ～ 1 |
| work material | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] | Cast Iron[○] / Aluminum[◎] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Titanium[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[○] | High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Overall Length L(mm) | 66 ～ 153 | 105 ～ 280 | 120 ～ 330 | 185 ～ 390 | 58 ～ 200 | 50 ～ 115 | 62 ～ 124 | 46 ～ 124 | 66 ～ 107 | 66 ～ 124 | 49 ～ 124 | 62 ～ 79 | 66 ～ 91 | 46 ～ 137 | 38 ～ 66 | 66 ～ 124 | 34 ～ 117 | 100 ～ 200 | 62 ～ 107 | 62 ～ 124 | 46 ～ 137 | 47 ～ 67 | 90 ～ 110 | 85 ～ 128 | 48 ～ 144 | 56 ～ 194 | 56 ～ 110 | 48 ～ 108 | 49 ～ 160 | 47 ～ 130 | 45 ～ 112 | 47 ～ 130 | 44 ～ 47 | 68 ～ 146 | 81 ～ 242 | 54 ～ 110 | 54 ～ 126 | 190 ～ 280 | 57 ～ 65 | 38 ～ 46 | 38 ～ 50 | 38 | 38 | 38 | 40 |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | Straight Shank | End Mill Shank | End Mill Shank | Straight Shank | End Mill Shank | End Mill Shank | Straight Shank | Straight Shank | End Mill Shank | End Mill Shank | Straight Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | Other | Other | Other | Other | TiAlN | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | - | - | - | DLC | DLC | Other | Other | Other | Other | Other | Other | Other | DLC | DLC | Other | Other | Other | Dia Coat | Other | Other | Other | Other | Other | Other | TiCN | TiAlN |
| With/without Oil Hole | N/A | Available | Available | Available | Available | N/A | Available / N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available | N/A | Available / N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | - | N/A | N/A | Available | Available | N/A | N/A | Available | N/A | Available | N/A | N/A | N/A | N/A | N/A |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.015
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.115
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.215
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.315
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.383
- 2.39
- 2.4
- 2.41
- 2.415
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.51
- 2.515
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.61
- 2.615
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.705
- 2.71
- 2.715
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.779
- 2.78
- 2.79
- 2.8
- 2.81
- 2.815
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.915
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.35 / 4.50
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.40 / 4.60
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.70 / 5.00
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.25 / 5.70
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.30 / 5.80
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.65 / 5.90
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.00 / 6.80
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.10 / 6.90
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.30 / 7.20
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.50 / 7.40
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.55 / 7.50
- 5.558
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.95
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.13
- 6.15
- 6.2
- 6.23
- 6.25
- 6.3
- 6.33
- 6.35
- 6.35 (¼")
- 6.37
- 6.375
- 6.4
- 6.43
- 6.5
- 6.528
- 6.53
- 6.55
- 6.6
- 6.60 / 8.90
- 6.63
- 6.65
- 6.7
- 6.73
- 6.746
- 6.75
- 6.75 / 9.10
- 6.76
- 6.8
- 6.83
- 6.85
- 6.85 / 9.20
- 6.9
- 6.90 / 9.30
- 6.91
- 6.93
- 6.95
-
7～7.98
- 7
- 7.00 / 9.50
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.13
- 7.14
- 7.145
- 7.2
- 7.23
- 7.25
- 7.25 / 9.80
- 7.3
- 7.30 / 9.80
- 7.33
- 7.35
- 7.36
- 7.37
- 7.38
- 7.4
- 7.40 / 9.80
- 7.43
- 7.45
- 7.49
- 7.5
- 7.52
- 7.53
- 7.54
- 7.541
- 7.55
- 7.6
- 7.63
- 7.67
- 7.7
- 7.73
- 7.75
- 7.8
- 7.83
- 7.85
- 7.9
- 7.93
- 7.938
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
-
8～8.93
- 8
- 8.00 / 10.80
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.13
- 8.15
- 8.2
- 8.23
- 8.25
- 8.3
- 8.33
- 8.334
- 8.4
- 8.43
- 8.433
- 8.45
- 8.5
- 8.50 / 11.50
- 8.50000000000001
- 8.53
- 8.55
- 8.58
- 8.6
- 8.60 / 11.60
- 8.61
- 8.63
- 8.65
- 8.7
- 8.70 / 11.70
- 8.73
- 8.733
- 8.75
- 8.8
- 8.80000000000001
- 8.83
- 8.84
- 8.85
- 8.9
- 8.90000000000001
- 8.93
-
9～9.97
- 9
- 9.00 / 11.80
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.129
- 9.13
- 9.2
- 9.20000000000001
- 9.21
- 9.23
- 9.24
- 9.25
- 9.26
- 9.3
- 9.30 / 12.60
- 9.30000000000001
- 9.33
- 9.347
- 9.35
- 9.36
- 9.38
- 9.4
- 9.40000000000001
- 9.43
- 9.5
- 9.50000000000001
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.58
- 9.6
- 9.60000000000001
- 9.63
- 9.65
- 9.7
- 9.70000000000001
- 9.73
- 9.75
- 9.8
- 9.80000000000001
- 9.83
- 9.85
- 9.9
- 9.90000000000001
- 9.92
- 9.921
- 9.93
- 9.95
- 9.97
-
10～10.93
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.13
- 10.2
- 10.23
- 10.25
- 10.25 / 13.80
- 10.26
- 10.3
- 10.30 / 13.80
- 10.32
- 10.33
- 10.4
- 10.40 / 13.80
- 10.43
- 10.45
- 10.49
- 10.5
- 10.50 / 13.80
- 10.53
- 10.55
- 10.6
- 10.63
- 10.65
- 10.7
- 10.71
- 10.716
- 10.72
- 10.73
- 10.75
- 10.8
- 10.80 / 14.60
- 10.83
- 10.85
- 10.9
- 10.93
-
11～11.95
- 11
- 11.00 / 14.90
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.113
- 11.12
- 11.13
- 11.14
- 11.2
- 11.20 / 15.10
- 11.22
- 11.23
- 11.24
- 11.3
- 11.33
- 11.36
- 11.38
- 11.4
- 11.43
- 11.5
- 11.50 / 15.50
- 11.509
- 11.51
- 11.53
- 11.55
- 11.56
- 11.6
- 11.63
- 11.7
- 11.73
- 11.8
- 11.83
- 11.85
- 11.9
- 11.908
- 11.91
- 11.93
- 11.95
-
12～12.96
- 12
- 12.00 / 15.80
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.10 / 16.30
- 12.2
- 12.25
- 12.25 / 16.50
- 12.3
- 12.304
- 12.4
- 12.5
- 12.50 / 16.90
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.96
-
13～13.9
- 13
- 13.096
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.5
- 13.50 / 17.80
- 13.55
- 13.6
- 13.65
- 13.7
- 13.75
- 13.8
- 13.89
- 13.891
- 13.9
-
14～14.96
- 14
- 14.00 / 18.90
- 14.1
- 14.10 / 19.00
- 14.2
- 14.25
- 14.25 / 19.20
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.50 / 19.60
- 14.55
- 14.6
- 14.68
- 14.684
- 14.69
- 14.7
- 14.75
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15.08
- 15.083
- 15.1
- 15.10 / 19.80
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.48
- 15.5
- 15.55
- 15.6
- 15.7
- 15.8
- 15.87
- 15.875
- 15.88
- 15.9
-
16～16.9
- 16
- 16.08
- 16.1
- 16.2
- 16.27
- 16.271
- 16.3
- 16.4
- 16.5
- 16.55
- 16.6
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
-
17～17.9
- 17
- 17.07
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.463
- 17.5
- 17.50 / 19.80
- 17.55
- 17.6
- 17.7
- 17.8
- 17.86
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.258
- 18.26
- 18.3
- 18.35
- 18.4
- 18.5
- 18.6
- 18.65
- 18.654
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5/24.7
- 24
- 24.5
- 24.5/24.7
-
25～25.5
- 25
- 25.5
-
26～26.5/26.7
- 26
- 26.5
- 26.5/26.7
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30～30.5
- 30
- 30.5
-
31～31.5
- 31
- 31.5
-
32～32.5
- 32
- 32.5
-
33～33.5
- 33
- 33.5
-
34～34.5
- 34
- 34.5
-
35～35.5
- 35
- 35.5
-
36～36.5
- 36
- 36.5
-
37～37.5
- 37
- 37.5
-
38～38.5
- 38
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
58
-
59
-
60
-
65
-
70
-
75
-
80
-
85
-
90
-
95
-
100
-
110
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.97
- 2
- 2.1
- 2.2
- 2.3
- 2.31
- 2.4
- 2.5
- 2.6
- 2.64
- 2.7
- 2.8
- 2.9
- 2.97
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.4
- 32
- 32.3
- 32.4
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
130
-
131
-
132
-
133
-
135
-
136
-
137
-
138
-
140
-
143
-
144
-
145
-
146
-
148
-
149
-
150
-
152
-
153
-
154
-
155
-
156
-
159
-
160
-
161
-
162
-
163
-
165
-
167
-
168
-
169
-
170
-
171
-
173
-
175
-
176
-
177
-
180
-
182
-
183
-
184
-
185
-
188
-
189
-
190
-
195
-
196
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
215
-
216
-
218
-
219
-
220
-
222
-
223
-
224
-
227
-
230
-
231
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
264
-
265
-
270
-
272
-
274
-
277
-
280
-
282
-
292
-
295
-
300
-
302
-
310
-
315
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
-
Tool Material Type
-
Overall Length L(mm)
-
Shank Type
-
Coating Y/N
- Available
- N/A
-
Coating Type
-
With/without Oil Hole
Brand
-
- GUHRING (37)
- NACHI(FUJIKOSHI) (36)
- OSG (27)
- DIJET (11)
- IWATA TOOL (10)
- NS TOOL (8)
- ATOM (6)
- OKAZAKI SEIKO (5)
- UNION TOOL (4)
- SANDVIK (2)
- KYOWA SEIKO (1)
- RYOKO SEIKI (1)
- WIDIA (1)
- 7 LEADERS (0)
- ASAHI TOOLS (0)
- OMIKOGYO (0)
- FUKUDA (0)
- EIKOSHA (0)
- DIXI (0)
- WIDIN (0)
- TOYO DRILL (0)
CAD data type
-
- 2D
- 3D
Categories related to Carbide Drills
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.