Screw-Hole-Related Tools（Screw size (Nominal)：M18）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.41 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.84 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	44.71 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap HT (Cutting Tap)

YAMAWA MFG

Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	45.68 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SG Spiral Tap SGSP

NACHI(FUJIKOSHI)

[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

Select to compare

Configure now
Starting from^∗ ：	157.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series, Tin Coated, TIN-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	89.02 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 400 Forming Tap

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	191.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroTap 100 Cutting Tap with Straight Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	75.70 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 200 Cutting Tap with Spiral Point

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.71 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

OSG

Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping

Select to compare

Configure now
Starting from^∗ ：	349.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	111.04 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Tap for Ultra High Hardness Steel UH-CT

YAMAWA MFG

[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Select to compare

Configure now
Starting from^∗ ：	584.11 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

OSG

Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

Select to compare

Configure now
Starting from^∗ ：	251.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.09 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Select to compare

Configure now
Starting from^∗ ：	107.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Hand Tap for Light Alloys N-CT LA

YAMAWA MFG

A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.

Select to compare

Configure now
Starting from^∗ ：	373.72 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	76.53 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	84.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide-Spiral Tap N-CT-SP

YAMAWA MFG

[Features]
· A carbide spiral tap; ideal for mass-production tapping of materials such as aluminum casting (AC), aluminum die casting (ADC) and zinc diecasting (ZDC).

Select to compare

Configure now
Starting from^∗ ：	550.54 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Screw extractor

GEDORE

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.68 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Screw extractor

GEDORE

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.68 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Tap insert

FEIN

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.12 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

OSG

Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.06 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	75.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	75.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Tin Coated, TIN-HT

OSG

Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	67.89 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Hand Tap Series, Super Hard Hand Tap, OTT

OSG

Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

Select to compare

Configure now
Starting from^∗ ：	199.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	93.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	47.26 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

OSG

Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment, EX-H-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	46.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, General Long Shank, EX-LT-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	72.70 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap remover Plus (regular size)

EIKOSHA

Dedicated drill for removing broken high speed steel taps

Select to compare

Configure now
Starting from^∗ ：	585.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Seamless TAFLET

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	146.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap

SKC

[Features]
Can be used for tapping screw holes in stainless steel.
[Features]
This twist tap can evacuate chips with a helical flute.

Select to compare

Configure now
Starting from^∗ ：	112.85 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Round Adjustable Die

SKC

[Features]
Adjustable screw thread (die) used when machining external threads.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.59 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	169.27 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL

YAMAWA MFG

We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	169.27 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole such as cast aluminum, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	169.27 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	YAMAWA MFG	NACHI(FUJIKOSHI)	OSG	SANDVIK	SANDVIK	SANDVIK	OSG	SANDVIK	OSG	OSG	OSG	OSG	YAMAWA MFG	OSG	OSG	OSG	OSG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	GEDORE	GEDORE	FEIN	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	EIKOSHA	TANOI MFG	SKC	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Point Tap Series, for General, EX-POT	A Tap Series, Spiral Tap, A-SFT	Spiral Tap Series, General Purpose EX-SFT	Spiral Tap Series, for Stainless EX-SUS-SFT	Hand Tap HT (Cutting Tap)	SG Spiral Tap SGSP	Groove-Free Tap Series, Tin Coated, TIN-NRT	SANDVIK CoroTap 400 Forming Tap	SANDVIK CoroTap 100 Cutting Tap with Straight Flutes	SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	SANDVIK CoroTap 200 Cutting Tap with Spiral Point	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT	Groove-Free Tap Series X Performer S-XPF	A Tap Series for Pipes Point Tap A-POT	Carbide Tap for Ultra High Hardness Steel UH-CT	Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT	Hand Tap Series, for Difficult-to-Machine Material, CPM-HT	Point Tap Series, Tin Coated, TIN-POT	Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT	Carbide Hand Tap for Light Alloys N-CT LA	Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Carbide-Spiral Tap N-CT-SP	Screw extractor	Screw extractor	Tap insert	Spiral Tap Series, Short Chamfer Type, EX-SC-SFT	Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT	Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT	Hand Tap Series, Tin Coated, TIN-HT	Hand Tap Series, Super Hard Hand Tap, OTT	Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT	Point Tap Series For Stainless Steel Use EX-SUS-POT	Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT	Point Tap Series, General Homo Treatment, EX-H-POT	Point Tap Series, General Long Shank, EX-LT-POT	Tap remover Plus (regular size)	Seamless TAFLET	Spiral Tap	Round Adjustable Die	HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP	HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS
Starting from^∗	43.41 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	74.84 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	44.71 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	48.86 € *Unit price with basic configuration Volume Discount	45.68 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	157.50 € *Unit price with basic configuration	89.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	191.08 € *Unit price with basic configuration	-	-	75.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	78.71 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	349.38 € *Unit price with basic configuration	111.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	73.64 € *Unit price with basic configuration Volume Discount	584.11 € *Unit price with basic configuration	251.88 € *Unit price with basic configuration	66.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	73.30 € *Unit price with basic configuration Volume Discount	107.25 € *Unit price with basic configuration	373.72 € *Unit price with basic configuration	76.53 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	84.38 € *Unit price with basic configuration	550.54 € *Unit price with basic configuration	11.68 € *Unit price with basic configuration Volume Discount	11.68 € *Unit price with basic configuration Volume Discount	96.12 € *Unit price with basic configuration Volume Discount	48.06 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	75.70 € *Unit price with basic configuration Volume Discount	75.70 € *Unit price with basic configuration Volume Discount	67.89 € *Unit price with basic configuration Volume Discount	199.88 € *Unit price with basic configuration	93.17 € *Unit price with basic configuration Volume Discount	47.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	91.92 € *Unit price with basic configuration Volume Discount	46.56 € *Unit price with basic configuration Volume Discount	72.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	585.95 € *Unit price with basic configuration	146.96 € *Unit price with basic configuration	112.85 € *Unit price with basic configuration	32.59 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	169.27 € *Unit price with basic configuration Volume Discount	169.27 € *Unit price with basic configuration Volume Discount	169.27 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	5 Days	5 Days	5 Days	6 Days	5 Days	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	6 Days	8 Days	11 Days	3 Days	7 Days	8 Days	6 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	Same day	8 Days	8 Days	8 Days
Specifications			Stock		Stock
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	-	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M14 ～ M18	M14 ～ M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18	M18
Pitch (P), Number of Threading(mm)	1 ～ 2.5	1 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	0.5 ～ 2.5	2.5	1.5 ～ 2.5	-	-	-	1.5 ～ 2.5	-	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	0.5 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	-	-	-	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	2.5	1.5 ～ 2.5	1.5 ～ 2.5	-	1 ～ 2.5	1 ～ 2.5	2.5	1.5	1.5	1.5
Chamfer threads (Lcf)	5P	2.5P	2.5P	2.5P	1.5P ～ 5P	2.5	2P ～ 4P	-	-	-	5P	-	3P	3P	2P	5P	5P	1.5P ～ 3P	2P ～ 5P	5P	6P	1.5P ～ 3P	-	2.5P	2.5P	-	-	-	1.5P	2.5P	2.5P	1.5P ～ 5P	1.5P ～ 3P	5P	4P	4P	5P	5P	-	1P ～ 2P	-	-	2.5P	5P	2.5P
Tool Material Type	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Alloy HSS	Vanadium High-Speed Steel	-	-	-	Powder high-speed steel	-	Powder high-speed steel	Carbide	Powder high-speed steel	Powder high-speed steel	Carbide	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Alloy HSS	Powder high-speed steel	Carbide	-	-	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	High-speed steel	-	-	Cobalt HSS	Cobalt HSS	Cobalt HSS
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	-	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Hardness Steel (50-60 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	High Hardness Steel (50-60 HRC)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]
Tap Type	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Spiral Tap	Roll tap	-	-	-	Point tap	-	Spiral Tap	Hand Tap	Roll tap	Point tap	Point tap	Hand Tap	Hand Tap	Point tap	Point tap	Hand Tap	Die	Spiral Tap	Spiral Tap	-	-	-	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Hand Tap	Point tap	Point tap	Point tap	Point tap	Point tap	Modification/removal Tool	Roll tap	Spiral Tap	Die	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For through hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	-	-	-	For through hole	-	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	-	For blind hole	For blind hole	-	-	-	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	-	-	-	-	For through hole / For blind hole	For through hole	For through hole / For blind hole
Coating Y/N	N/A	Available	N/A	N/A	N/A	Available	Available	-	-	-	N/A	-	N/A	Available	Available	Available	Available	N/A	N/A	Available	Available	N/A	N/A	Available	N/A	-	-	-	N/A	N/A	N/A	Available	N/A	Available	N/A	N/A	N/A	N/A	Available	Available	-	-	Available	Available	Available
Coating Type	Non-Coated	Other	Non-Coated	Non-Coated	-	TiCN	TiN	-	-	-	Non-Coated	-	Non-Coated	Other	TiCN	Other	TiAlN	Non-Coated	Non-Coated	TiN	TiN	-	Non-Coated	Other	-	-	-	-	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Other	TiCN	-	-	TiCN	TiCN	TiCN
Overall Length (L)(mm)	100	100	100	100	100	100	100	125	125	112 ～ 125	100	112 ～ 125	100	100	110 ～ 125	100	100	150	100	100	150	95 ～ 100	-	150	95 ～ 100	-	-	-	100	150	150 ～ 250	100	95 ～ 100	150	100	200	100	150 ～ 250	100	80 ～ 100	-	-	100	100	100

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No0UN

NO.0-80UNF

No.0-80UNF

No.10

S0.1

NO.1-72UNF

No.1-72UNF

NO.1-64UNC

No.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

No.12-32UNEF

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

No.4

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-40UNF

No.6-32UNC

S0.7

No.8

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1"

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

PT 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-20UNEF

1´-14UNS

1'-12UNF

1´-12UNF

1´-11

1′-11

1-8UNC

1'-8UNC

1´-8UNC

G1"-3"

1"1/2UN

1"1/2

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1´1/2-11

1′1/2-11

1 1/2-8UN

1"1/4UN

1"1/4

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1´1/4-11

1′1/4-11

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1´ 1/8-7UNC

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-28UNEF

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1/2W12

1 3/4

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1′3/4-11

1 3/4-8UN

1 3/8

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PS 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-32UNEF

1/4-28UNF

1/4-20UNC

1/4-19

1/4W20

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1'W8

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PF 1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/8SM40

1/8SM44

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

1/16-28

1/16SM80

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2"

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2´-11

2′-11

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

2′1/2-11

W2"1/4

M2.2

M2.3

M2.5

M2.6

3M

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

STI M3

UNC 3

UNF 3

3′-11

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-20UNEF

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-32UNEF

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

3/16SM24

3/16W24

3/16SM28

3/16SM32

3/16SM40

M3 - M18

SM3/32

3/32SM56

3/32SM100

3.5

M3.5

4

4M

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

STI M4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

5M

EGM 5

M5

M5.0

MF5

No5UN

STI M5

UNC 5

№5-40UNC

5/8

5/8UN

G5/8

G 5/8

NPS5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-24UNEF

5/8-18UNF

5/8-11UNC

G5/8 3/4

5/8W11

M5 - M12

M5～13

5/16

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-32UNEF

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5/64SM64

5.5M

M5.5

6

EGM 6

M6

M6.0

MF6

No6UN

STI M6

UNC 6

UNF 6

UNJC 6

No6-40UNF

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8

7/8UN

G7/8

G 7/8

NPS7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-20UNEF

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-28UNEF

7/16-20UNF

7/16-14UNC

7/16W14

SM7/32

7.5

M7.5

EGM 8

M8

MF8

No8UN

STI M8

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

9

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

9/64SM40

M9.5

EGM 10

M10

MF10

No10UN

STI M10

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

PG11

SM11/32

SM11/64

11/64SM40

EGM 12

M12

MF12

Mf12

No12UN

STI M12

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

Tr 14

M15

SM15/64

15/64SM28

M16

MF16

Mf16

PG16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M21

PG21

M22

M22X

MF22

Tr 22

M23

M24

M24X

MF24

Tr 24

M25

M25X

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

PG29

M30

MF30

Tr 30

M32

Mf32

M33

M34

M35

M36

PG36

M37

M38

M39

M40

M42

PG42

M44

M45

M46

M48

M50

M52

M56

M64

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5

1.5-Shaped

1.5 P

1.5P

2

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

3.5P

4

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

7P

8P

9 P

9P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

41.5

42

44

44.5

45

46

47.62

47.625

48

49

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

61.5

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

230

250

260

270

280

290

300

310

315

460
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- YAMAWA MFG (33)
- OSG (30)
- SANDVIK (5)
- GEDORE (2)
- NACHI(FUJIKOSHI) (2)
- SKC (2)
- EIKOSHA (1)
- TANOI MFG (1)
- FEIN (1)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GUHRING (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear