Screw-Hole-Related Tools（Tool Material Type：Carbide）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Carbide Tap for Ultra High Hardness Steel UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.Configure nowStarting from∗ ： 99.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread, No Finishing Flute 60°
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.Configure nowStarting from∗ ： 208.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Hand Tap
MISUMI
[Features]
-Hand taps made from uncoated carbide
-Can be used for both blind holes and through holes
-Suitable for mass production of taps for various cast irons.- Volume Discount
Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spiral Tap Series, Carbide Spiral Tap OT-SFT
OSG
Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machineConfigure nowStarting from∗ ： 72.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hard Hand Tap, OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Configure nowStarting from∗ ： 60.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread G (55°)
CARMEX
Threading can be performed for both internal and external threads with a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.- Volume Discount
Configure nowStarting from∗ ： 222.23 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Configure nowStarting from∗ ： 88.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Configure nowStarting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT
OSG
Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.Configure nowStarting from∗ ： 117.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Configure nowStarting from∗ ： 101.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT
OSG
Suitable for threading hardened steel up to 55 HRC.
Material: High hardness steel up to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3- Volume Discount
Configure nowStarting from∗ ： 83.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series Carbide New Roll Tap OT-NRT
OSG
Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.Configure nowStarting from∗ ： 85.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Tap for High Hardness Steel EH-CT
YAMAWA MFG
Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.Configure nowStarting from∗ ： 110.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Hand Tap for Light Alloys N-CT LA
YAMAWA MFG
A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.Configure nowStarting from∗ ： 106.83 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Carbide Hand Tap for Cast Iron N-CT FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.Configure nowStarting from∗ ： 106.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Metric Screw (ISO)
CARMEX
Enables internal threading to be performed in a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread BSPT
CARMEX
For both internal and external threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Tapered End Mill
CARMEX
[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened- Volume Discount
Configure nowStarting from∗ ： 119.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Jet Mini Mill Thread for Aircraft MJ
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Configure nowStarting from∗ ： 217.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultrafine particle carbide and new type three-layer PVD coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices- Volume Discount
Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model
MISUMI
[Features]
-Carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for non-steel metals such as aluminium and copper.- Volume Discount
Configure nowStarting from∗ ： 113.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.- Volume Discount
Configure nowStarting from∗ ： 181.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
Configure nowStarting from∗ ： 181.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Spiral Tap
MISUMI
[Features]
-Carbide tap with uncoated spiral flute
-Can be used for machining blind holes
-Suitable for mass production of aluminium and copper alloys- Volume Discount
Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 129.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT
OSG
Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) TappingConfigure nowStarting from∗ ： 83.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet DR-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityConfigure nowStarting from∗ ： 295.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityConfigure nowStarting from∗ ： 324.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
OSG
By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.Configure nowStarting from∗ ： 165.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT
OSG
TIN coating with excellent solvent resistance, abrasion resistance has been applied.- Volume Discount
Configure nowStarting from∗ ： 39.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT
OSG
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Configure nowStarting from∗ ： 41.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT
OSG
Exhibits Exceptional Power Toward 50-60 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, etc.)Configure nowStarting from∗ ： 168.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT
OSG
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.Configure nowStarting from∗ ： 50.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT
OSG
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.- Volume Discount
Configure nowStarting from∗ ： 29.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT
OSG
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.Configure nowStarting from∗ ： 52.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT
OSG
This type with a long shaft is used for machining tapered internal threads in pipes. It is suitable for difficult-to-cut materials such as stainless steel.Configure nowStarting from∗ ： 40.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT
OSG
This is a short thread type used for machining tapered internal threads in pipes. It is suitable for hard-to-cut materials such as stainless steel.Configure nowStarting from∗ ： 25.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT
OSG
This is a short thread, long shank type used for machining tapered internal threads. It is suitable for difficult-to-cut materials such as stainless steel.Configure nowStarting from∗ ： 46.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap OT-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Configure nowStarting from∗ ： 133.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Configure nowStarting from∗ ： 162.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Configure nowStarting from∗ ： 133.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT
OSG
In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.Configure nowStarting from∗ ： 121.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT
OSG
In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.Configure nowStarting from∗ ： 148.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | CARMEX | MISUMI | OSG | OSG | CARMEX | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT | Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT | Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC | Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT | Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT | Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT | Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT | Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT | Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT | Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT | Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT | Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT | Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT | Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT | ||||||||||||||||||||
| Starting from∗ | 99.90 € *Unit price with basic configuration | 208.53 € *Unit price with basic configuration | 33.97 € *Unit price with basic configuration Volume Discount | 72.40 € *Unit price with basic configuration | 60.78 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 222.23 € *Unit price with basic configuration Volume Discount | 88.83 € *Unit price with basic configuration | 158.30 € *Unit price with basic configuration Volume Discount | 117.30 € *Unit price with basic configuration | 101.50 € *Unit price with basic configuration Volume Discount | 83.34 € *Unit price with basic configuration Volume Discount | 85.84 € *Unit price with basic configuration | 110.69 € *Unit price with basic configuration | 106.83 € *Unit price with basic configuration | 106.83 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 119.87 € *Unit price with basic configuration Volume Discount | 217.83 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration Volume Discount | 113.79 € *Unit price with basic configuration Volume Discount | 181.78 € *Unit price with basic configuration Volume Discount | 181.83 € *Unit price with basic configuration Volume Discount | 33.97 € *Unit price with basic configuration Volume Discount | 129.51 € *Unit price with basic configuration | 83.15 € *Unit price with basic configuration | 295.75 € *Unit price with basic configuration | 324.46 € *Unit price with basic configuration | 165.90 € *Unit price with basic configuration | 39.15 € *Unit price with basic configuration Volume Discount | 41.25 € *Unit price with basic configuration | 168.46 € *Unit price with basic configuration | 50.57 € *Unit price with basic configuration | 29.40 € *Unit price with basic configuration Volume Discount | 52.87 € *Unit price with basic configuration | 40.55 € *Unit price with basic configuration | 25.37 € *Unit price with basic configuration | 46.86 € *Unit price with basic configuration | 133.79 € *Unit price with basic configuration | 162.75 € *Unit price with basic configuration | 133.79 € *Unit price with basic configuration | 121.33 € *Unit price with basic configuration | 148.20 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 5 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Parallel for Pipes | Meter | Meter | Meter / Unified / Taper for Pipe | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Parallel for Pipes | Taper for Pipe | Other | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes |
| Screw size (Nominal) | M2 ～ M20 | - | M3 ～ M10 | M3 ～ M12 | M1.4 ～ M20 | - | M2 ～ M12 | M3 ～ M20 | - | M3 ～ M12 | - | M3 ～ M12 | M3 ～ M12 | M3 ～ M12 | M1.4 ～ M20 | No.10-32UNF ～ M24 | M3 ～ M27 | - | - | - | - | M3 ～ M20 | M3 ～ M16 | M1.4 ～ M20 | M3 ～ M12 | M3 ～ M10 | M3 ～ M12 | M2 ～ M20 | M6 ～ M12 | M6 ～ M12 | - | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | G1/2 ～ G3/8 | G1/2 ～ G3/8 |
| Pitch (P), Number of Threading(mm) | 0.4 ～ 2.5 | - | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 0.3 ～ 2.5 | 11 ～ 28 | 0.4 ～ 1.75 | 0.5 ～ 2.5 | 1 ～ 28 | 0.5 ～ 1.75 | 0.25 ～ 32 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.3 ～ 2.5 | 0.3 ～ 3 | 0.5 ～ 3 | - | - | - | - | 0.5 ～ 2.5 | 0.5 ～ 2 | 0.3 ～ 2.5 | 0.5 ～ 1.75 | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 0.4 ～ 2.5 | 1 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 3 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 11 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 |
| Chamfer threads (Lcf) | 5P | - | 1.5 P ～ 3 P | 1.5P ～ 2.5P | 1.5P ～ 3P | - | - | 1.5P ～ 3P | - | 2P | - | 2.5P ～ 5P | 2P | 5P | 1.5P ～ 5P | 1.5P ～ 3P | - | - | - | - | - | - | - | - | - | 1.5 P ～ 2.5 P | 1.5P ～ 3P | 3P | - | - | - | 2.5P | 2.5P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 3P |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| work material | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Quenched and tempered steel (45 to 55 HRC)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | High Hardness Steel (50-60 HRC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] |
| Tap Type | Point tap | Thread cutter | Hand Tap | Spiral Tap | Hand Tap | Thread cutter | Thread cutter | Hand Tap | Thread cutter | Roll tap | Thread cutter | Hand Tap | Roll tap | Point tap | Hand Tap | Hand Tap | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Hand Tap | Hand Tap | Thread cutter | Thread cutter | Thread cutter | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes |
| Hole type | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | - | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole |
| Coating Y/N | Available | Available | N/A | N/A | N/A | Available | Available | N/A | Available | N/A | Available | Available | N/A | Available | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Coating Type | TiAlN | Nitriding Treatment | - | Non-Coated | Non-Coated | Nitriding Treatment | TiAlN | Non-Coated | TiAlN | Non-Coated | For High Hardness (Silicon Group) / Other | TiCN | Non-Coated | TiAlN | - | - | TiAlN | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | TiAlN | DLC | TiAlN | For High Hardness (Silicon Group) | - | TiCN | TiCN / Other | TiAlN | TiAlN | TiAlN | TiN | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 40 ～ 105 | 58 ～ 101 | 46 ～ 75 | 46 ～ 82 | 34 ～ 105 | 58 ～ 105 | 58 ～ 73 | 100 ～ 150 | 60 ～ 120 | 100 ～ 150 | 40 | 46 ～ 82 | 46 ～ 82 | 46 ～ 82 | 34 ～ 105 | 34 ～ 120 | 58 ～ 120 | 58 ～ 105 | 58 ～ 84 | 58 ～ 64 | 39 ～ 58 | 57 ～ 115 | 57 ～ 92 | 39 ～ 105 | 48 ～ 74 | 46 ～ 75 | 46 ～ 82 | 40 ～ 105 | 62 ～ 89 | 62 ～ 89 | 60 ～ 120 | 55 ～ 95 | 55 ～ 95 | 59 ～ 87 | 120 ～ 150 | 55 ～ 95 | 120 ～ 150 | 100 ～ 150 | 55 ～ 95 | 100 ～ 150 | 55 ～ 80 | 100 ～ 150 | 55 ～ 80 | 55 ～ 80 | 100 ～ 150 |
Loading...
Filter by:
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- CARMEX (35)
- OSG (26)
- YAMAWA MFG (16)
- EIKOSHA (2)
- GUHRING (2)
- NACHI(FUJIKOSHI) (2)
- NS TOOL (2)
- SKC (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.