Screw-Hole-Related Tools（Coating Y/N：Available Page 3）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Titanium Coated Through Hole Spiral Tap AU+SL
YAMAWA MFG
Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining- Volume Discount
Configure nowStarting from∗ ： 21.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Dry Processing Roll Tap OL+RZ / OL-RZ
YAMAWA MFG
It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.- Volume Discount
Configure nowStarting from∗ ： 27.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High Performance Roll Tap HP+ RZ / HP-RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)- Volume Discount
Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Coating Spiral Tap AU+ SP
YAMAWA MFG
Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.- Volume Discount
Configure nowStarting from∗ ： 21.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Shank Titanium Coated Point Tap LS-PO-V(LS-N-PO-V)
YAMAWA MFG
* LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.- Volume Discount
Configure nowStarting from∗ ： 37.13 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Tap for High Hardness Steel EH-CT
YAMAWA MFG
Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.Configure nowStarting from∗ ： 110.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Through Holes for High Speed F-SL
YAMAWA MFG
Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to Occur- Volume Discount
Configure nowStarting from∗ ： 29.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for High Speed F-SP
YAMAWA MFG
Capable of 20/MIN ~ 30/MIN high-speed processing. Use of medium or low speeds at 15M/MIN or less will cause a poor shape and poor emission of chips, causing trouble to occur.- Volume Discount
Configure nowStarting from∗ ： 29.58 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Carbide MC - Helical Cutter MC-CSLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Configure nowStarting from∗ ： 295.34 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ultra-High Speed Carbide Tap for Cast Iron / Die Cast Aluminum for Blind Holes HFACT-B
YAMAWA MFG
Uses a carbide tap with a center through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for blind hole of aluminum cast iron and aluminum die-casting.Configure nowStarting from∗ ： 152.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ultra-High Speed Carbide Tap for Cast Iron / Die Cast Aluminum for Through Holes HFACT-P
YAMAWA MFG
Uses a carbide tap with a side through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for through holes of aluminum cast iron and aluminum die-casting.Configure nowStarting from∗ ： 152.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ultra-High Speed Carbide Tap for Cast Iron for Blind Holes HFICT-B
YAMAWA MFG
Uses a carbide tap with a center through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for blind hole of cast iron.Configure nowStarting from∗ ： 152.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ultra-High Speed Carbide Tap for Cast Iron for Through Holes HFICT-P
YAMAWA MFG
Uses a carbide tap with a side through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for through holes of cast iron.Configure nowStarting from∗ ： 152.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Metric Screw (ISO)
CARMEX
Enables internal threading to be performed in a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread G (55°)
CARMEX
Threading can be performed for both internal and external threads with a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Unified Screw (UN)
CARMEX
For internal threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread BSPT
CARMEX
For both internal and external threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread NPT
CARMEX
For both inner/outer diameter threads.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread NPTF
CARMEX
For both inner/outer diameter threads.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole ISO
CARMEX
Metric thread / for I.D.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mill Thread G (55°) Solid Carbide with Oil Hole
CARMEX
Whitworth screw, I.D./O.D. common type.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole BSPT
CARMEX
BSPT thread, I.D./O.D. common type.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole UN
CARMEX
For unified screws and inner diameter screws.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole NPT
CARMEX
NPT thread, I.D./O.D. common type.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole NPS
CARMEX
Internal and external use inch shank.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole NPSF
CARMEX
Inch shank for both inner and outer diameters.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTZ Jet Mill Thread with Oil Hole ISO
CARMEX
For metric I.D. thread.
[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.Configure nowStarting from∗ ： 263.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTZ Jet Mill Thread with Oil Hole BSPT
CARMEX
For both internal and external threading.
[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.Configure nowStarting from∗ ： 305.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTZ Jet Mill Thread with Oil Hole BSW
CARMEX
For both internal and external threading.
[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.Configure nowStarting from∗ ： 263.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads
CARMEX
For internally threaded metric screws.
[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3DConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw
CARMEX
For internally threaded unified screws.
[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3DConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid for Outer Diameter, Mill Thread ISO
CARMEX
Metric thread / for O.D. thread.
[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutesConfigure nowStarting from∗ ： 342.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid for Outer Diameter, Mill Thread UN
CARMEX
For unified screws and outer diameter screws.
[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutesConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Tapered End Mill
CARMEX
[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened- Volume Discount
Configure nowStarting from∗ ： 119.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mini Mill Thread G55°
CARMEX
For both G (55°) inner and outer diameter thread (MT7).
[Features]
· Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
· Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
· Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
· Because high-speed cutting can be performed, machining time is shortened.
· The blade length is short (3 ridges), so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.
· Enables thread cutting of difficult-to-cut and high hardness materials.Configure nowStarting from∗ ： 211.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Jet Mini Mill Thread for Aircraft UNJ
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Configure nowStarting from∗ ： 213.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Jet Mini Mill Thread for Aircraft MJ
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Configure nowStarting from∗ ： 217.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread, No Finishing Flute 60°
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.Configure nowStarting from∗ ： 208.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole
CARMEX
With internal coolant hole, up to screw depth D1 x 2.
[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.Configure nowStarting from∗ ： 298.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole
CARMEX
With internal coolant hole, up to screw depth D1 x 2.
[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.Configure nowStarting from∗ ： 304.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hard Cut ISO
CARMEX
[Features]
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.Configure nowStarting from∗ ： 244.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hard Cut UN
CARMEX
[Features]
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.Configure nowStarting from∗ ： 218.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Slim Head Type Hard Cut MTH ISO
CARMEX
[Features]
· For mini mill thread type hard cuts, we have developed an innovative tool capable of threading high hardness materials up to HRC 62 in one pass.
· Shortens machining time because the same tool can be used for thread cutting and chamfering.
· Compatible with relatively large diameters.
· The unique coating technology demonstrates excellent resistance to abrasion and heat.
· Excellent carbide grade which also handles hardened steel.
· Cutting chips are reduced, providing machining stability.
· The cycle time is short, increasing productivity.
· Supports screw depths up to twice the machining thread diameter.Configure nowStarting from∗ ： 266.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 24.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 25.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | OSG | OSG |
| Product Series | Ultra-High Speed Carbide Tap for Cast Iron / Die Cast Aluminum for Blind Holes HFACT-B | Ultra-High Speed Carbide Tap for Cast Iron / Die Cast Aluminum for Through Holes HFACT-P | Ultra-High Speed Carbide Tap for Cast Iron for Blind Holes HFICT-B | Ultra-High Speed Carbide Tap for Cast Iron for Through Holes HFICT-P | Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads | For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw | DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole | DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole | |||||||||||||||||||||||||||||||||||||
| Starting from∗ | 21.06 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 27.00 € *Unit price with basic configuration Volume Discount | 24.43 € *Unit price with basic configuration Volume Discount | 21.66 € *Unit price with basic configuration Volume Discount | 37.13 € *Unit price with basic configuration Volume Discount | 110.69 € *Unit price with basic configuration | 29.58 € *Unit price with basic configuration Volume Discount | 29.58 € *Unit price with basic configuration Volume Discount | 295.34 € *Unit price with basic configuration | 152.35 € *Unit price with basic configuration | 152.35 € *Unit price with basic configuration | 152.35 € *Unit price with basic configuration | 152.35 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 263.46 € *Unit price with basic configuration | 305.88 € *Unit price with basic configuration | 263.46 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 342.45 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 119.87 € *Unit price with basic configuration Volume Discount | 211.31 € *Unit price with basic configuration | 213.39 € *Unit price with basic configuration | 217.83 € *Unit price with basic configuration | 208.53 € *Unit price with basic configuration | 298.23 € *Unit price with basic configuration | 304.42 € *Unit price with basic configuration | 244.68 € *Unit price with basic configuration | 218.26 € *Unit price with basic configuration | 266.94 € *Unit price with basic configuration | 24.10 € *Unit price with basic configuration Volume Discount | 25.83 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 7 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days |
| Screw Types | Meter | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Parallel for Pipes | Unified | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | Parallel for Pipes | Parallel for Pipes | Unified | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | Parallel for Pipes | Whitworth | Meter | Unified | Meter | Unified | Taper for Pipe | Whitworth | Other | Other | Meter | Meter | Unified | Meter | Unified | Meter | Meter | Meter |
| Screw size (Nominal) | M3 ～ M12 | No.10-32UNF ～ M6 | No.10-32UNF ～ M20 | M2 ～ M12 | M3 ～ M12 | M3 ～ M12 | M3 ～ M12 | M3 ～ M12 | 06510X28R ～ 200505N300M | M6 ～ M12 | M6 ～ M12 | M6 ～ M12 | M6 ～ M12 | M3 ～ M27 | - | - | - | - | - | M4 ～ M24 | - | - | - | - | - | - | M6 ～ M20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | M3 ～ M12 | M3 ～ M16 | M3 ～ M12 |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 1.75 | 0.25 ～ 1 | 0.25 ～ 1.75 | 0.4 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 3 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 3 | 11 ～ 28 | - | - | - | - | 0.5 ～ 3 | - | - | - | - | - | - | 1 ～ 2.5 | - | - | 1 ～ 4 | - | 1 ～ 2 | - | - | - | - | - | - | 1 ～ 2 | - | 0.4 | - | 0.5 ～ 1.75 | 0.5 ～ 2 | 0.5 ～ 1.75 |
| Chamfer threads (Lcf) | 5P | 4P | 2P ～ 4P | 2.5P | 5P | 5P | 5P | 2.5P | - | 2.5P | 4P | 2.5P | 4P | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3P | - |
| Tool Material Type | High-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] |
| Tap Type | Spiral Tap | Roll tap | Roll tap | Spiral Tap | Point tap | Point tap | Spiral Tap | Spiral Tap | Thread cutter | Point tap | Point tap | Point tap | Point tap | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Roll tap |
| Hole type | For through hole | For through hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiN | TiCN | TiCN | TiN | TiN | TiAlN | TiN | TiN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Other | Other |
| Overall Length (L)(mm) | 46 ～ 82 | 36 ～ 62 | 36 ～ 105 | 42 ～ 82 | 100 ～ 150 | 46 ～ 82 | 46 ～ 82 | 46 ～ 82 | 50 ～ 140 | 62 ～ 82 | 62 ～ 82 | 62 ～ 82 | 62 ～ 82 | 58 ～ 120 | 58 ～ 105 | 58 ～ 105 | 58 ～ 105 | 58 ～ 105 | 58 ～ 105 | 58 ～ 120 | 64 ～ 105 | 64 ～ 105 | 64 ～ 105 | 64 ～ 73 | 63 ～ 76 | 63 ～ 76 | 58 ～ 101 | 64 ～ 101 | 58 ～ 73 | 73 ～ 160 | 73 ～ 105 | 73 ～ 84 | 73 ～ 84 | 58 ～ 84 | 64 ～ 105 | 58 ～ 73 | 58 ～ 64 | 58 ～ 101 | 64 ～ 84 | 64 | 39 | 39 ～ 84 | 58 ～ 84 | 46 ～ 95 | 80 ～ 150 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (56)
- YAMAWA MFG (39)
- CARMEX (35)
- NACHI(FUJIKOSHI) (7)
- SANDVIK (5)
- TANOI MFG (4)
- GUHRING (3)
- ISHIHASHI (3)
- EIKOSHA (2)
- NS TOOL (2)
- SKC (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.