Screw-Hole-Related Tools（Coating Y/N：Available Page 4）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
- << Previous
- 1
- 2
- 3
- 4
-
Configure now
Starting from∗ ： 64.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 53.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 47.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultrafine particle carbide and new type three-layer PVD coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws
CARMEX
Metric thread / for I.D. thread
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 212.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hard Cut ISO
CARMEX
Now with further improved cutting performance and beautiful surface finishing.
[Features]
· Lineup starting from the very small diameter of M1.4 x 0.3 is available.
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.Configure nowStarting from∗ ： 390.43 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
A Tap Series Point Tap Long Shank A-LT-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.Configure nowStarting from∗ ： 23.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 36.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· Oxidized type with excellent welding resistance.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials:
Stainless steel or steel.
[Material]
· High-Speed Steel (HSS-E)- Volume Discount
Configure nowStarting from∗ ： 31.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type)
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials: Steel.
[Material]
· High-Speed Steel (HSS-E)- Volume Discount
Configure nowStarting from∗ ： 45.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTap 200 3 × DN Point Tap JIS EP0DM
SANDVIK
[Features]
·Wide selection of power strip for different work materials
·For work materials with long cutting chips- Volume Discount
Configure nowStarting from∗ ： 38.34 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)
SANDVIK
[Features]
· A high-productivity tap tool.
· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.
· The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.
· There are different taps for different work materials, making selecting a tap simple
[Applications]
· For machining through holes.
· Work material: steel, cast iron, aluminum alloy.Configure nowStarting from∗ ： 76.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 184.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG Point Tap SGPO
NACHI(FUJIKOSHI)
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.Configure nowStarting from∗ ： 30.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Thread Cutting Tool (for Unified Threads) MMTU
NS TOOL
[Features]
・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.
・ Adopts MUGEN Coating Premium for the realization of a long life.
・ For Unified Standard threadsConfigure nowStarting from∗ ： 108.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG Spiral Tap Short Chamfer SGSP-1.5P
NACHI(FUJIKOSHI)
[Features]
・ Bite shape optimized for long life- Volume Discount
Configure nowStarting from∗ ： 19.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG Spiral Tap Long Shank SGSPL
NACHI(FUJIKOSHI)
[Applications]
·Used when standard dimension does not have enough tool runout lengthConfigure nowStarting from∗ ： 48.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Aluminum AL-SP 1.5P
YAMAWA MFG
[Features]
· Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.- Volume Discount
Configure nowStarting from∗ ： 12.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
I Series Point Tap IPO Blister Pack
YAMAWA MFG
[Features]
· Through-hole tap for low speed machining with a drilling machine.
· Use for machining iron products (SPC, SS400, etc.) that are commonly available.
· Has a surface treatment (oxide treated) that is ideal for machining iron.
· Machines small amounts of female threads for product prototypes.
· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.- Volume Discount
Configure nowStarting from∗ ： 13.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SU Roll Tap SURZ
YAMAWA MFG
[Features]
· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
· Demonstrates effectiveness for roll tap machining of stainless steel.
· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.- Volume Discount
Configure nowStarting from∗ ： 37.44 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL
YAMAWA MFG
[Features]
· Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
· Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
· Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
· Improves the surface roughness of female threads.- Volume Discount
Configure nowStarting from∗ ： 37.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 128.63 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Long-Shank Short-Spiral Tap For Stainless Steel LS-SU-S-SP
YAMAWA MFG
[Features]
· A long-shank short-spiral tap for stainless steel; ideal for machining pilot holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
· Can also be used for deep tapping operations.- Volume Discount
Configure nowStarting from∗ ： 32.26 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO
YAMAWA MFG
[Features]
· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
· Can also be used for deep tapping operations.- Volume Discount
Configure nowStarting from∗ ： 32.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long-Shank Spiral Tap For High-Speeds & Through Holes LS-F-SL
YAMAWA MFG
[Features]
· A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.- Volume Discount
Configure nowStarting from∗ ： 53.11 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Long-Shank Spiral Tap For High-Speeds LS-F-SP
YAMAWA MFG
[Features]
· A long-shank spiral tap for use in high-speed machining between 15 m/min and 25 m/min.- Volume Discount
Configure nowStarting from∗ ： 53.11 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spiral Tap For Medium-Hardness Carbon Steel MHSP
YAMAWA MFG
[Features]
· Ideal for S48C to S55C forged products and thermally refined materials (20 to 30 HRC).
· Manufactured with abrasion-resistant high-speed steel and a special coating for a longer service life.
· The special shape of the threaded section helps prevent the chipping of the section which is fully-threaded, reducing tapping torque and frictional resistance while also maintaining its thread guiding capability.
· The overall length is set so that an appropriate amount of tool protrusion is secured to prevent the ejected cutting chips interfering with the holder.- Volume Discount
Configure nowStarting from∗ ： 42.84 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF
YAMAWA MFG
[Features]
· A spiral tap. Suitable for machining stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.- Volume Discount
Configure nowStarting from∗ ： 39.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | CARMEX | CARMEX | CARMEX | CARMEX | OSG | YAMAWA MFG | SANDVIK | SANDVIK | SANDVIK | SANDVIK | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NS TOOL | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT | Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters | MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws | Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type) | Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type) | Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL | Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO | Long-Shank Spiral Tap For High-Speeds & Through Holes LS-F-SL | Spiral Tap For Stainless Steel, Parallel Pipe Threads SU-SP-PF | ||||||||||||||||||
| Starting from∗ | 64.89 € *Unit price with basic configuration | 53.57 € *Unit price with basic configuration | 47.40 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 212.85 € *Unit price with basic configuration | 390.43 € *Unit price with basic configuration | 23.65 € *Unit price with basic configuration | 36.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.33 € *Unit price with basic configuration Volume Discount | 45.42 € *Unit price with basic configuration Volume Discount | 38.34 € *Unit price with basic configuration Volume Discount | 76.42 € *Unit price with basic configuration | 184.77 € *Unit price with basic configuration | 30.44 € *Unit price with basic configuration | 108.22 € *Unit price with basic configuration | 19.48 € *Unit price with basic configuration Volume Discount | 48.60 € *Unit price with basic configuration | 12.67 € *Unit price with basic configuration Volume Discount | 13.98 € *Unit price with basic configuration | 37.44 € *Unit price with basic configuration Volume Discount | 37.30 € *Unit price with basic configuration Volume Discount | 128.63 € *Unit price with basic configuration | 32.26 € *Unit price with basic configuration Volume Discount | 32.26 € *Unit price with basic configuration Volume Discount | 53.11 € *Unit price with basic configuration Volume Discount | 53.11 € *Unit price with basic configuration Volume Discount | 42.84 € *Unit price with basic configuration Volume Discount | 39.39 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | Same day | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | Same day | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 7 Days | 6 Days | 8 Days | 8 Days | 7 Days | 8 Days |
| Screw Types | Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Unified | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Parallel for Pipes |
| Screw size (Nominal) | Rc1/2 ～ Rc3/8 | Rc1/2 ～ Rc3/8 | Rc1/2 ～ Rc3/8 | - | - | M1 ～ M3 | - | M2 ～ M24 | M6 ～ M14 | M5 ～ M10 | M4 ～ M10 | M3 ～ M24 | M8 ～ M12 | M4 ～ M12 | M1.4 ～ M24 | NO.0-80UNF ～ 1/4-20UNC | M2 ～ M8 | M3 ～ M17 | - | - | No.2 ～ No.6 | - | 3.5 ～ 9 | M3 ～ M24 | M3 ～ M24 | M3 ～ M30 | M3 ～ M30 | M8 ～ M16 | PF 1 ～ PF 3/8 |
| Pitch (P), Number of Threading(mm) | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | - | - | 0.25 ～ 0.5 | 2 | 0.25 ～ 3 | 1 ～ 1.5 | 0.8 ～ 1.5 | 0.7 ～ 1.5 | 0.5 ～ 3 | 1 | 0.7 ～ 1.75 | 0.25 ～ 3 | - | 0.4 ～ 2.5 | 0.35 ～ 3 | - | - | 0.2 ～ 56 | - | 1 | 0.5 ～ 3 | 0.5 ～ 3 | 0.5 ～ 3.5 | 0.5 ～ 3.5 | 1 ～ 2 | 11 ～ 28 |
| Chamfer threads (Lcf) | 2.5P | 2.5P | 2.5P | - | - | - | - | 5P | 2 ～ 4 | 2P | 2.5P | - | - | 2.5 | 5 | - | 1.5 | 2.5 | 1.5P | 5P | 2P | 5P ～ 7P | - | 2.5P | 4.5P ～ 5P | 5P ～ 5.5P | 2.5P ～ 3P | 2.5P | 2.5P |
| Tool Material Type | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | - | - | - | - | - | Carbide | High-speed steel | Carbide | Alloy HSS | Alloy HSS | High-speed steel | High-speed steel | Powder high-speed steel | Cobalt HSS | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | - | - | - | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] |
| Tap Type | Tap for pipes | Tap for pipes | Tap for pipes | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Point tap | Roll tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Spiral Tap | Point tap | Thread cutter | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Roll tap | Spiral Tap | Thread cutter | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For blind hole | - | - | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For through hole | - | For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiN | TiN | TiN | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Other | - | Other | TiN | TiCN | TiN | TiCN | TiCN | TiAlN | - | - | Nitriding Treatment | Other | Other | Other | Other | Other | Other | - | - | - | Other |
| Overall Length (L)(mm) | 120 ～ 150 | 100 ～ 150 | 100 ～ 150 | 39 ～ 58 | 39 ～ 64 | 39 | 84 | 80 ～ 200 | 62 ～ 88 | 60 ～ 75 | 52 ～ 75 | 46 ～ 120 | 70 | 52 ～ 82 | 34 ～ 120 | 45 | 40 ～ 82 | 150 ～ 200 | - | - | - | - | - | 100 ～ 200 | 100 ～ 200 | 100 ～ 200 | 100 ～ 200 | 90 ～ 110 | 59 ～ 109 |
Loading...
- << Previous
- 1
- 2
- 3
- 4
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (56)
- YAMAWA MFG (39)
- CARMEX (35)
- NACHI(FUJIKOSHI) (7)
- SANDVIK (5)
- TANOI MFG (4)
- GUHRING (3)
- ISHIHASHI (3)
- EIKOSHA (2)
- NS TOOL (2)
- SKC (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.