Spiral Taps（Screw size (Nominal)：M2）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.35 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG Spiral Tap SGSP

NACHI(FUJIKOSHI)

[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

Select to compare

Configure now
Starting from^∗ ：	44.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	13.66 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	24.72 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroTap 200 Cutting Tap with Spiral Point

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	26.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

High-Speed Steel Spiral Tap

High-Speed Steel Spiral Tap【10 Pieces Per Package】

MISUMI

[Features]
-High speed uncoated steel tap with spiral flutes
-Suitable for machining blind holes
-Effective for materials with continuous chips such as carbon steel and steel alloys.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	126.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, TIN-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, V Coated, V-SFT

OSG

Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.11 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Plus Series Spiral Tap +SP (N+SP)

YAMAWA MFG

A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	49.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand tap, Finish tap

RUKO

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.27 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

MISUMI

[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	82.63 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

MT Series High-Speed Steel Spiral Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.63 €
	Special price
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

OSG

Allows internal threading of stainless steel with a water soluble cutting fluid.
Tool material: Vanadium high speed steel
Hole type: For blind holes
Material: General steel/stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT

OSG

Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

OSG

Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.35 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Aluminum AL+SP / AL-SP

YAMAWA MFG

A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.10 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap for Stainless Steel SU+SP / SU-SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.10 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coating Spiral Tap AU+ SP

YAMAWA MFG

Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Short Spiral Tap for Deep Holes S-SP

YAMAWA MFG

Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG Spiral Tap Short Chamfer SGSP-1.5P

NACHI(FUJIKOSHI)

[Features]
・ Bite shape optimized for long life

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Die metric

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.40 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

CNC tapping head

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.89 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	NACHI(FUJIKOSHI)	OSG	SANDVIK	SANDVIK	OSG	MISUMI	OSG	OSG	YAMAWA MFG	OSG	RUKO	MISUMI	MISUMI	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	NACHI(FUJIKOSHI)	REX TOOLS	REX TOOLS
Product Series	A Tap Series, Spiral Tap, A-SFT	Spiral Tap Series, for Stainless EX-SUS-SFT	SG Spiral Tap SGSP	Spiral Tap Series, General Purpose EX-SFT	SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes	SANDVIK CoroTap 200 Cutting Tap with Spiral Point	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	High-Speed Steel Spiral Tap【10 Pieces Per Package】	Spiral Tap Series, Tin Coated, TIN-SFT	Spiral Tap Series, V Coated, V-SFT	Plus Series Spiral Tap +SP (N+SP)	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Hand tap, Finish tap	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】	MT Series High-Speed Steel Spiral Tap	Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT	Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT	Spiral Tap Series, Short Chamfer Type, EX-SC-SFT	Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT	Spiral Tap for Aluminum AL+SP / AL-SP	Spiral Tap for Stainless Steel SU+SP / SU-SP	Coating Spiral Tap AU+ SP	Short Spiral Tap for Deep Holes S-SP	SG Spiral Tap Short Chamfer SGSP-1.5P	Die metric	CNC tapping head
Starting from^∗	22.35 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.96 € *Unit price with basic configuration Volume Discount	44.83 € *Unit price with basic configuration	13.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.72 € *Unit price with basic configuration	26.46 € *Unit price with basic configuration	24.24 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	126.81 € *Unit price with basic configuration Volume Discount	22.67 € *Unit price with basic configuration Volume Discount	29.11 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.17 € *Unit price with basic configuration Volume Discount	49.94 € *Unit price with basic configuration	5.27 € *Unit price with basic configuration Volume Discount	82.63 € *Unit price with basic configuration Volume Discount	13.63 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	23.43 € *Unit price with basic configuration Volume Discount	20.76 € *Unit price with basic configuration Volume Discount	14.35 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	25.21 € *Unit price with basic configuration Volume Discount	22.10 € *Unit price with basic configuration Volume Discount	22.10 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	29.58 € *Unit price with basic configuration Volume Discount	22.91 € *Unit price with basic configuration Volume Discount	28.42 € *Unit price with basic configuration Volume Discount	7.40 € *Unit price with basic configuration Volume Discount	14.89 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	6 Days	6 Days	5 Days	5 Days	Same day	5 Days	6 Days	Same day	6 Days	6 Days	3 Days	5 Days	5 Days	6 Days	6 Days	8 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days	3 Days	3 Days
Specifications				Stock
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	-
Screw size (Nominal)	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2	M2
Pitch (P), Number of Threading(mm)	0.25 ～ 0.4	0.4	0.25 ～ 0.4	0.25 ～ 0.4	-	-	0.4	0.4	0.4	0.4	0.4	0.25 ～ 0.4	-	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	-	-
Chamfer threads (Lcf)	2.5P	2.5P	2.5	2.5P	-	-	3P	2.5 P	2.5P	2.5P	2.5P	2.5P	-	2.5 P	2.5 P	2.5P	3P	1.5P	2.5P	2.5P	2.5P	2.5P	2.5P	1.5	-	-
Tool Material Type	Powder high-speed steel	Vanadium High-Speed Steel	Alloy HSS	Vanadium High-Speed Steel	-	-	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Powder high-speed steel	High-speed steel	Powder high-speed steel	Cobalt HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Alloy HSS	-	-
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	-	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○/◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-
Tap Type	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	-	-	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	-	-
Hole type	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	-	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	-	-
Coating Y/N	Available	N/A	Available	N/A	-	-	N/A	N/A	Available	Available	N/A	Available	-	N/A	N/A	Available	N/A	N/A	N/A	N/A	N/A	Available	N/A	Available	-	-
Coating Type	Other	Non-Coated	TiCN	Non-Coated	-	-	Non-Coated	-	TiN	Other	-	Other	-	-	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	-	-	TiN	-	-	-	-
Overall Length (L)(mm)	40	40	40	40	41 ～ 45	41 ～ 45	40	40	40	40	42	80	-	40	40	40	40	40	80 ～ 100	42	42	42	42	40	-	-

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Trapezoid
Clear

Screw size (Nominal)
No.10-32UNF

No.10-24UNC

No.2-56UNC

No.3-48UNC

No.4-48UNF

No.4-40UNC

No.5-44UNF

No.5-40UNC

No.6-40UNF

No.6-32UNC

No.8-36UNF

No.8-32UNC

1UN

1UNS

G 1"

M1

PF 1

UNC 1"

UNF 1"

W1

1'-12UNF

1-8UNC

1'-8UNC

1"1/2UN

W1"1/2

1 1/2-8UN

1"1/4UN

W1"1/4

1 1/4-8UN

1"1/8UN

W1"1/8

1 1/8-8UN

1/2UN

G 1/2

PF 1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1/2W12

1"3/4UN

1 3/4-8UN

1"3/8UN

W1"3/8

1 3/8-8UN

1/4UN

G 1/4

PF 1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4W20

1 5/8-8UN

1 7/8-8UN

1'W8

G 1/8

PF 1/8

SM1/8

W1/8

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

M1.4

M1.6

M1.7

M1.8

M2

UNC 2

2-8UN

M2.2

M2.3

M2.5

M2.6

M3

3/4UN

G 3/4

PF 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/4W10

3/8UN

G 3/8

PF 3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-16UNC

3/8W16

M3 - M10

M3 - M12

SM3/16

W3/16

3/16W24

SM3/32

M3.5

M4

MF4

No4UN

UNC 4

UNF 4

№4-40UNC

M4.5

5M

M5

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G 5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

5.5M

M5.5

M6

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

G 7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-20UNF

7/16-14UNC

7/16W14

M8

MF8

No8UN

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

M10

MF10

No10UN

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M22

MF22

Tr 22

M23

M24

MF24

Tr 24

M25

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

M30

MF30

Tr 30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

18

19

20

24

28

32

36

40

44

48

56
Clear

Chamfer threads (Lcf)
1.5

1.5 P

1.5P

2P

2.5

2.5 P

2.5P

3P

5P

5.5P

7P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiCN
- TiN
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

39

40

41

42

44

44.5

45

46

47.62

48

49.21

50

50.8

51

52

53

53.98

55

55.28

55.64

55.92

56

58

59

60

60.32

62

62.52

62.65

63

63.5

65

66

67

69.06

69.42

69.71

70

72

74.61

75

79.03

79.31

80

80.17

82

85

85.72

87

88

89

89.12

89.18

90

91.28

95

96

96.84

98.97

99.21

100

102

105

108

109

109.65

110

112

113.5

115

118

119

120

125

130

130.175

130.2

135

140

145

150

155

160

165

170

175

180

185

190

195

200

205

220

224

225

230

250

260

270

280

290

300

315
Drawing

Clear

Brand

- MISUMI (3)
- Cost Efficient Products ()
- OSG (11)
- YAMAWA MFG (5)
- NACHI(FUJIKOSHI) (2)
- REX TOOLS (2)
- SANDVIK (2)
- RUKO (1)
- BERNSTEIN AG (0)
- STAHLWILLE (0)
- TRUSCO NAKAYAMA (0)
- ISHIHASHI (0)
- GEDORE (0)
- WALTER PROTOTYP (0)
- HAZET (0)
- WERA (0)
- FEIN (0)
- ESCO (0)
- SKC (0)
Clear

CAD data type

- 2D
- 3D
Clear

Spiral Taps（Screw size (Nominal)：M2）

A Tap Series, Spiral Tap, A-SFT

Spiral Tap Series, for Stainless EX-SUS-SFT

SG Spiral Tap SGSP

Spiral Tap Series, General Purpose EX-SFT

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK CoroTap 200 Cutting Tap with Spiral Point

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

High-Speed Steel Spiral Tap【10 Pieces Per Package】

Spiral Tap Series, Tin Coated, TIN-SFT

Spiral Tap Series, V Coated, V-SFT

Plus Series Spiral Tap +SP (N+SP)

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

Hand tap, Finish tap

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

MT Series High-Speed Steel Spiral Tap

Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

Spiral Tap for Aluminum AL+SP / AL-SP

Spiral Tap for Stainless Steel SU+SP / SU-SP

Coating Spiral Tap AU+ SP

Short Spiral Tap for Deep Holes S-SP

SG Spiral Tap Short Chamfer SGSP-1.5P

Die metric

CNC tapping head

Categories related to Spiral Taps

Betalningsmetod

Behovsstyrd tillverkning

Ändra vy

Certifikat

MISUMI världen över

Sociala medier

Juridiskt meddelande