Spiral Taps（work material：Quenched and tempered steel (25 to 35 HRC)）

?* Information on days to ship and prices

• 

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]
  -Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

  Select to compare

  Configure now
  Starting from∗ ：	30.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

  OSG

  Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Plus Series Spiral Tap +SP (N+SP)

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
  [Features]
  · Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
  [Applications]
  · Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.48 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX

  YAMAWA MFG

  Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.36 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  SG Spiral Tap Short Chamfer SGSP-1.5P

  NACHI(FUJIKOSHI)

  [Features]
  ・ Bite shape optimized for long life

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.48 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

  MISUMI

  [Features]
  -Multi-use tap for all materials from general steel, heat treated steel to stainless steel
  -Efficient chip removal due to short thread form and special flute shape.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	52.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  MT Series High-Speed Steel Spiral Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

  OSG

  Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
  Tool material: Powder metal high-speed steel
  Thread type: Metric
  Hole type: For blind holes
  Material: General steel / heat-treated steel
  Coating: Surface treatment for steel.

  Select to compare

  Configure now
  Starting from∗ ：	17.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT

  OSG

  Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	84.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Use SU Spiral-Type

  SKC

  [Specifications]
  · Shape: Spiral tap
  · Screw type: metric
  · Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
  · Material Details: SKH

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP

  YAMAWA MFG

  Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.15 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL

  YAMAWA MFG

  We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.15 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS

  YAMAWA MFG

  Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.15 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

  YAMAWA MFG

  Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the horizontal direction processing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.15 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Flute Tap SP (N-SP)

  YAMAWA MFG

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
  [Features]
  ・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
  ・ Intermittent cutting of female threads with keyway is also possible.
  ・ Capable of machining both synchronously and asynchronously.
  ・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
  ・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
  ・ The tap can easily cut.
  ・ Intermittent cutting of pilot holes with keyway is also possible.
  ・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
  [Applications]
  ・ Ideal for machining blind holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap for Titanium Alloy, for Through Hole ZET-P

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Titanium Alloy ZET-B

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Nickel Base Alloy ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Coating Spiral Tap AU+ SP

  YAMAWA MFG

  Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Long Shank Spiral Tap LS-SP(LS-N-SP)

  YAMAWA MFG

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)

  YAMAWA MFG

  * LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	37.13 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for High Speed F-SP

  YAMAWA MFG

  Capable of 20/MIN ~ 30/MIN high-speed processing. Use of medium or low speeds at 15M/MIN or less will cause a poor shape and poor emission of chips, causing trouble to occur.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.58 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spiral Tap For High Carbon Steel HC+SP / HC-SP

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.27 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Short Spiral Tap for Deep Holes S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	299.16 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

  YAMAWA MFG

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SG Spiral Tap Long Shank SGSPL

  NACHI(FUJIKOSHI)

  [Applications]
  ·Used when standard dimension does not have enough tool runout length

  Select to compare

  Configure now
  Starting from∗ ：	48.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL

  YAMAWA MFG

  [Features]
  · Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
  · Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
  · Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
  · Improves the surface roughness of female threads.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	37.30 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Spiral Tap For Medium-Hardness Carbon Steel MHSP

  YAMAWA MFG

  [Features]
  · Ideal for S48C to S55C forged products and thermally refined materials (20 to 30 HRC).
  · Manufactured with abrasion-resistant high-speed steel and a special coating for a longer service life.
  · The special shape of the threaded section helps prevent the chipping of the section which is fully-threaded, reducing tapping torque and frictional resistance while also maintaining its thread guiding capability.
  · The overall length is set so that an appropriate amount of tool protrusion is secured to prevent the ejected cutting chips interfering with the holder.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	42.84 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...