Shipping Days |
|
---|
?* Information on days to ship and prices
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 139.88 € |
---|---|
Min. Shipping Days : | 10 Days |
*Unit price with basic configuration
MISUMI
Configure now
|
|
Starting from∗ : | 13.14 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 13.26 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 22.07 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 29.34 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 15.47 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 12.65 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
GUHRING
Configure now
|
|
Starting from∗ : | 33.58 € |
---|---|
Min. Shipping Days : | 24 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 22.07 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 19.13 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 48.06 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
MISUMI
Configure now
|
|
Starting from∗ : | 122.12 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 24.60 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 13.42 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 19.69 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 19.67 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 22.91 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
NACHI(FUJIKOSHI)
Configure now
|
|
Starting from∗ : | 44.18 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
Configure now
|
|
Starting from∗ : | 7.93 € |
---|---|
Min. Shipping Days : | 3 Days |
*Unit price with basic configuration
Configure now
|
|
Starting from∗ : | 14.89 € |
---|---|
Min. Shipping Days : | 3 Days |
*Unit price with basic configuration
Configure now
|
|
Starting from∗ : | 5.27 € |
---|---|
Min. Shipping Days : | 3 Days |
*Unit price with basic configuration
Brand |
---|
Product Series |
Starting from∗ |
Min. Shipping Days |
Screw Types |
Screw size (Nominal) |
Pitch (P), Number of Threading(mm) |
Chamfer threads (Lcf) |
Tool Material Type |
work material |
Tap Type |
Hole type |
Coating Y/N |
Coating Type |
Overall Length (L)(mm) |
Brand | YAMAWA MFG | MISUMI | OSG | OSG | OSG | OSG | OSG | GUHRING | OSG | YAMAWA MFG | OSG | MISUMI | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | REX TOOLS | REX TOOLS | RUKO |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT | Point Tap Series, for Difficult-to-Machine Material, CPM-POT | |||||||||||||||||||
Starting from∗ | 139.88 € *Unit price with basic configuration Volume Discount | 13.14 € *Unit price with basic configuration Volume Discount | 13.26 € *Unit price with basic configuration Volume Discount | 22.07 € *Unit price with basic configuration Volume Discount | 29.34 € *Unit price with basic configuration Volume Discount | 15.47 € *Unit price with basic configuration Volume Discount | 12.65 € *Unit price with basic configuration Volume Discount | 33.58 € *Unit price with basic configuration Volume Discount | 22.07 € *Unit price with basic configuration Volume Discount | 19.13 € *Unit price with basic configuration Volume Discount | 48.06 € *Unit price with basic configuration | 122.12 € *Unit price with basic configuration Volume Discount | 24.60 € *Unit price with basic configuration Volume Discount | 13.42 € *Unit price with basic configuration Volume Discount | 19.69 € *Unit price with basic configuration Volume Discount | 19.67 € *Unit price with basic configuration Volume Discount | 22.91 € *Unit price with basic configuration Volume Discount | 44.18 € *Unit price with basic configuration | 7.93 € *Unit price with basic configuration Volume Discount | 14.89 € *Unit price with basic configuration Volume Discount | 5.27 € *Unit price with basic configuration Volume Discount |
Min. Shipping Days | 10 Days | 5 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | 24 Days | 6 Days | 8 Days | 6 Days | 5 Days | Same day | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 3 Days | 3 Days | 3 Days |
Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | - | - | Meter |
Screw size (Nominal) | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 |
Pitch (P), Number of Threading(mm) | 0.4 | 0.4 | 0.25 ~ 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.25 ~ 0.4 | 0.4 | 0.25 ~ 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.25 ~ 0.4 | - | - | - |
Chamfer threads (Lcf) | 5P | 5 P | 5P | 5P | 5P | 4P | 5P | - | 5P | 5P | 5P | 5 P | 6P | 5P | 5P | 5P | 5P | 5 | - | - | - |
Tool Material Type | Carbide | Cobalt HSS | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | - | - | High-speed steel |
work material | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - |
Tap Type | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | - | - | Hand Tap |
Hole type | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | - | - | - |
Coating Y/N | Available | N/A | N/A | Available | N/A | N/A | N/A | Available | Available | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | Available | - | - | - |
Coating Type | TiAlN | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | TiN | Other | - | Other | - | Non-Coated | Non-Coated | Non-Coated | - | - | TiCN | - | - | - |
Overall Length (L)(mm) | 40 | 40 | 40 | 40 | 80 ~ 100 | 40 | 40 | 40 | 40 | 42 | 80 | 40 | 40 | 40 | 40 | 42 | 42 | 40 | - | - | - |
Loading...
Filter by:
Stock
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)
Brand
CAD data type