Point Taps（Chamfer threads (Lcf)：5P）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.45 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.49 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coated, V-POT

OSG

Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Titanium coating point tab PO-V (N-PO-V)

YAMAWA MFG

Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap PO(N-PO)

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.26 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Tap for High Hardness Steel EH-CT

YAMAWA MFG

Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

Select to compare

Configure now
Starting from^∗ ：	110.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Tap for Ultra High Hardness Steel UH-CT

YAMAWA MFG

[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Select to compare

Configure now
Starting from^∗ ：	99.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Select to compare

Configure now
Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coating, Long Shank, V-LT-POT

OSG

Select to compare

Configure now
Starting from^∗ ：	23.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment, EX-H-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, General Long Shank, EX-LT-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	40.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Thin Plates, EX-SS-POT

OSG

Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap (for metric screws)

TRUSCO NAKAYAMA

[Features]
High-speed tapping is possible.
Homogenization treated.
[Use]
For through hole machining.
Work materials: general steel, low to cedium carbon steel, alloy steel.

Select to compare

Configure now
Starting from^∗ ：	9.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel Point Tap SU+PO / SU-PO

YAMAWA MFG

Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.22 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Plus Series Point Tap +PO (N+PO)

YAMAWA MFG

* N+SP will be replaced with +SP as soon as there is no more in stock.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Titanium Coated Point Tap LS-PO-V(LS-N-PO-V)

YAMAWA MFG

* LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.13 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Point Tap For High Carbon Steel HC+PO / HC-PO

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.27 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Short Point Tap for Deep Holes S-PO

YAMAWA MFG

A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.65 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide Point Tap N-CT-PO

YAMAWA MFG

Select to compare

Configure now
Starting from^∗ ：	105.47 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Select to compare

Configure now
Starting from^∗ ：	23.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

I Series Point Tap IPO Blister Pack

YAMAWA MFG

[Features]
· Through-hole tap for low speed machining with a drilling machine.
· Use for machining iron products (SPC, SS400, etc.) that are commonly available.
· Has a surface treatment (oxide treated) that is ideal for machining iron.
· Machines small amounts of female threads for product prototypes.
· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Oxidized Point Tap For High Carbon Steel HC-PO OX

YAMAWA MFG

[Features]
· A point tap suitable for tapping high carbon steel varieties such as S55C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.81 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

YAMAWA MFG

[Features]
· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
· Can also be used for deep tapping operations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.76 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Point Tap For Aluminum (For Insert Coil) AL-PO

YAMAWA MFG

[Features]
· A part for use with comparatively soft materials such as aluminum. For female thread machining so that insert coils can be inserted with the purpose of reinforcing female threads and increasing durability.
· Especially for through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.21 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Point Tap Series, for General, EX-POT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	A Tap Series for Pipes Point Tap A-POT	Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT	Point Tap Series, V Coated, V-POT	Titanium coating point tab PO-V (N-PO-V)	Point Tap PO(N-PO)	Carbide Tap for High Hardness Steel EH-CT	Carbide Tap for Ultra High Hardness Steel UH-CT	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Point Tap Series, Tin Coated, TIN-POT	Point Tap Series, V Coating, Long Shank, V-LT-POT	Point Tap Series, General Homo Treatment, EX-H-POT	Point Tap Series, General Long Shank, EX-LT-POT	Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT	Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT	Point Tap Series, for Thin Plates, EX-SS-POT	Point Tap (for metric screws)	Stainless Steel Point Tap SU+PO / SU-PO	Plus Series Point Tap +PO (N+PO)	Long Shank Titanium Coated Point Tap LS-PO-V(LS-N-PO-V)	Point Tap For High Carbon Steel HC+PO / HC-PO	Short Point Tap for Deep Holes S-PO	Carbide Point Tap N-CT-PO	Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT	A Tap Series Point Tap Long Shank A-LT-POT	I Series Point Tap IPO Blister Pack	Oxidized Point Tap For High Carbon Steel HC-PO OX	Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO	Point Tap For Aluminum (For Insert Coil) AL-PO
Starting from^∗	7.45 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.49 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.94 € *Unit price with basic configuration Volume Discount	22.83 € *Unit price with basic configuration Volume Discount	24.73 € *Unit price with basic configuration Volume Discount	25.02 € *Unit price with basic configuration Volume Discount	15.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	110.69 € *Unit price with basic configuration	99.90 € *Unit price with basic configuration	28.34 € *Unit price with basic configuration	15.45 € *Unit price with basic configuration Volume Discount	23.17 € *Unit price with basic configuration	8.22 € *Unit price with basic configuration Volume Discount	14.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	21.73 € *Unit price with basic configuration Volume Discount	40.05 € *Unit price with basic configuration Volume Discount	7.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.74 € *Unit price with basic configuration	12.22 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.30 € *Unit price with basic configuration Volume Discount	37.13 € *Unit price with basic configuration Volume Discount	10.27 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.65 € *Unit price with basic configuration Volume Discount	105.47 € *Unit price with basic configuration	14.02 € *Unit price with basic configuration Volume Discount	23.65 € *Unit price with basic configuration	13.98 € *Unit price with basic configuration	16.81 € *Unit price with basic configuration Volume Discount	39.76 € *Unit price with basic configuration Volume Discount	26.21 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	Same day	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	Same day	6 Days	8 Days	Same day	8 Days	8 Days	6 Days	6 Days	6 Days	8 Days	7 Days	7 Days
Screw Types	Meter / Unified / Whitworth / Sewing Machine	Meter	Meter / Unified	Meter	Meter	Meter	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	No0UN ～ M48	M1.4 ～ M48	1/2-20UNF ～ M24	M3 ～ M24	M8 ～ M10	M3 ～ M12	No.10-32UNF ～ M24	M3 ～ M12	M2 ～ M20	M8	M1.4 ～ M42	M4 ～ M6	M2 ～ M42	M2 ～ M36	M3 ～ M14	M8 ～ M12	M1.4 ～ M12	M5 ～ M6	No.10-32UNF ～ M42	M3 ～ M6	M3 ～ M12	M1.4 ～ M24	M2 ～ M42	M3 ～ M12	M3 ～ M20	M2 ～ M24	-	M6 ～ M8	M8 ～ M24	STI M3 ～ STI M12
Pitch (P), Number of Threading(mm)	0.25 ～ 80	0.3 ～ 5	0.25 ～ 3	0.5 ～ 3	1 ～ 1.25	0.5 ～ 1.75	0.75 ～ 2	0.5 ～ 1.75	0.4 ～ 2.5	1.25	0.3 ～ 4.5	0.7 ～ 1	0.4 ～ 4.5	0.4 ～ 4	0.5 ～ 2	1.25 ～ 1.75	0.3 ～ 1.75	0.8 ～ 1	0.3 ～ 4.5	0.5 ～ 1	0.5 ～ 1.75	0.3 ～ 3	0.4 ～ 4.5	0.5 ～ 1.75	0.5 ～ 2.5	0.25 ～ 3	-	1 ～ 1.25	1.25 ～ 3	0.5 ～ 1.75
Chamfer threads (Lcf)	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P	5P
Tool Material Type	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Carbide	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (45 to 55 HRC)[○]	High Hardness Steel (50-60 HRC)[○]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○/◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	High Carbon Steel (C with a content over 0.45%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]
Tap Type	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Coating Y/N	N/A	N/A	Available	Available	Available	Available	N/A	Available	Available	Available	Available	Available	N/A	N/A	Available	N/A	N/A	-	N/A	N/A	Available	N/A	N/A	N/A	N/A	Available	Available	Available	Available	N/A
Coating Type	Non-Coated	Non-Coated	Other	TiN	TiCN	TiN	-	TiAlN	TiAlN	Other	TiN	TiCN	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	-	-	-	TiN	-	-	-	Non-Coated	Other	Other	Other	Other	-
Overall Length (L)(mm)	30 ～ 185	34 ～ 185	34 ～ 120	100 ～ 200	70 ～ 75	46 ～ 82	60 ～ 120	46 ～ 82	40 ～ 105	70	34 ～ 175	100	40 ～ 175	80 ～ 300	46 ～ 88	150	34 ～ 82	60 ～ 62	36 ～ 175	46 ～ 62	100 ～ 150	36 ～ 120	42 ～ 175	46 ～ 82	100 ～ 150	80 ～ 200	-	62 ～ 70	100 ～ 200	52 ～ 95

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
Clear

Screw size (Nominal)
No0UN

No.10-32UNF

No.10-24UNC

No.2-56UNC

No.4-48UNF

No.5-44UNF

No.5-40UNC

No.6-40UNF

No.6-32UNC

No.8-36UNF

No.8-32UNC

1UN

G 1"

M1

No1UN

W1

1"1/2UN

W1"1/2

1"1/4UN

W1"1/4

W1"1/8

1/2UN

G 1/2

UNC 1/2

UNF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1/2W12

1/4UN

G 1/4

SM1/4

UNC 1/4

UNF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4W20

G 1/8

SM1/8

W1/8

M1.1

M1.2

M1.4

M1.6

M1.7

M1.8

M2

No2UN

M2.2

M2.3

M2.5

M2.6

M3

No3UN

STI M3

3/4UN

G 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/4W10

3/8UN

G 3/8

UNC 3/8

UNF 3/8

W3/8

3/8-24UNF

3/8-16UNC

3/8W16

M3 - M10

M3 - M12

SM3/16

W3/16

3/16W24

SM3/32

M3.5

M4

No4UN

STI M4

№4-40UNC

M4.5

M5

No5UN

STI M5

№5-40UNC

5/8UN

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

M5.5

M6

No6UN

STI M6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

7/16-20UNF

7/16-14UNC

7/16W14

M8

MF8

No8UN

STI M8

№8-32UNC

M9

9/16UN

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

M10

MF10

No10UN

STI M10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

STI M12

M12 x 1.5

M13

M14

MF14

M15

SM15/64

M16

MF16

Mf16

M16 x 1.5

M17

M18

MF18

M19

M20

MF20

Mf20

M20 x 1.5

M22

M23

M24

M25

Mf25

M25 x 1.5

M26

M27

M28

M30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

6

7

8

9

10

11

12

13

14

16

18

20

24

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
2.5P

4P

4.5P

5

5 P

5P

6P

24P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Point tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiAlN
- TiCN
- TiN
- Non-Coated
- Other
Details

Clear

Overall Length (L)(mm)
30

32

33

34

35

36

39

40

41

42

44

45

46

48

50

51

52

53

55

56

58

59

60

62

63

65

66

70

72

75

80

82

85

88

89

90

95

100

102

105

110

112

115

120

125

130

135

140

145

150

155

160

165

175

180

185

200

250

300
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (15)
- YAMAWA MFG (14)
- TRUSCO NAKAYAMA (1)
- WERA (0)
- FEIN (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- SKC (0)
- SANDVIK (0)
- GEDORE (0)
- NACHI(FUJIKOSHI) (0)
- HAZET (0)
- REX TOOLS (0)
- GUHRING (0)
Clear

CAD data type

- 2D
- 3D
Clear

Point Taps（Chamfer threads (Lcf)：5P）

Point Tap Series, for General, EX-POT

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

A Tap Series for Pipes Point Tap A-POT

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

Point Tap Series, V Coated, V-POT

Titanium coating point tab PO-V (N-PO-V)

Point Tap PO(N-PO)

Carbide Tap for High Hardness Steel EH-CT

Carbide Tap for Ultra High Hardness Steel UH-CT

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

Point Tap Series, Tin Coated, TIN-POT

Point Tap Series, V Coating, Long Shank, V-LT-POT

Point Tap Series, General Homo Treatment, EX-H-POT

Point Tap Series, General Long Shank, EX-LT-POT

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

Point Tap Series, for Thin Plates, EX-SS-POT

Point Tap (for metric screws)

Stainless Steel Point Tap SU+PO / SU-PO

Plus Series Point Tap +PO (N+PO)

Long Shank Titanium Coated Point Tap LS-PO-V(LS-N-PO-V)

Point Tap For High Carbon Steel HC+PO / HC-PO

Short Point Tap for Deep Holes S-PO

Carbide Point Tap N-CT-PO

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

A Tap Series Point Tap Long Shank A-LT-POT

I Series Point Tap IPO Blister Pack

Oxidized Point Tap For High Carbon Steel HC-PO OX

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

Point Tap For Aluminum (For Insert Coil) AL-PO

Categories related to Point Taps

Betalningsmetod

Behovsstyrd tillverkning

Ändra vy

Certifikat

MISUMI världen över

Sociala medier

Juridiskt meddelande