Point Taps

147

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.45 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.49 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 100 Cutting Tap with Straight Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coated, V-POT

OSG

Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Z-OIL-POT, High speed tapping in general steels and stainless steels

OSG

High speed tapping in general steels and stainless steels - Side through coolant

Select to compare

Configure now
Starting from^∗ ：	56.20 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

CNC tapping head set

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.01 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

TiN Coated High-Speed Steel Point Tap

TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】

MISUMI

[Features]
-Can be used for through hole machining
-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
-Excellent abrasion resistance and resistance to chip welding due to TiN coating
-Long shank, ideal for drilling deep tapped holes (G-LS-POT).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

OSG

Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.81 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Titanium coating point tab PO-V (N-PO-V)

YAMAWA MFG

Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap with Nickel Base Alloy ZEN-P

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap PO(N-PO)

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.26 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Tap for High Hardness Steel EH-CT

YAMAWA MFG

Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

Select to compare

Configure now
Starting from^∗ ：	110.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Tap for Ultra High Hardness Steel UH-CT

YAMAWA MFG

[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Select to compare

Configure now
Starting from^∗ ：	99.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V-TI-POT, Powder metal spiral-point cutting tap for through holes, Metric

OSG

[Specifications]
・Powder metal spiral-point cutting tap for through holes
・Multilayer TiCN coating
・For Titanium alloys
・Metric

Select to compare

Configure now
Starting from^∗ ：	45.50 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

S-POT, HSSE spiral-point cutting tap for through holes, BSF

OSG

General purpose tapping in steels and stainless steels

Select to compare

Configure now
Starting from^∗ ：	27.00 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

S-POT, HSSE spiral-point cutting tap for through holes, BA

OSG

General purpose tapping in steels and stainless steels

Select to compare

Configure now
Starting from^∗ ：	16.20 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

S-POT 7G, HSSE spiral-point cutting tap for through holes, Metric

OSG

General purpose tapping in steels and stainless steels - For 7G internal thread tolerance

Select to compare

Configure now
Starting from^∗ ：	19.80 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

VA-POT, HSSE spiral-point cutting tap for through holes, UNF

OSG

General purpose tapping in steels and stainless steels

Select to compare

Configure now
Starting from^∗ ：	26.40 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

E-POT, Powder metal spiral-point cutting tap for through holes, UNJF

OSG

For Nickel-based alloys including Inconel 718

Select to compare

Configure now
Starting from^∗ ：	39.90 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Tap tool kit

GEDORE

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	290.41 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Thread file

GEDORE

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.28 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Treaded tool holder

GEDORE

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	147.48 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Tap tool kit

BERNSTEIN AG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.60 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Tapping combo head

WERA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.28 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Tapping combo head set

WERA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.75 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Die holder

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.96 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Tapping combo head

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.05 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Die guide bush set

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.73 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Hand tap set

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.68 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Thread repair kit

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.55 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Tap extractor

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.92 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Thread repair kit

STAHLWILLE

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	175.33 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Hand tap, Finish tap

RUKO

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.27 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

High-Speed Steel Point Tap

High-Speed Steel Point Tap【10 Pieces Per Package】

MISUMI

[Features]
-High speed uncoated steel tap with spiral point
-Can be used for through hole machining
-Effective for continuous chip materials such as carbon steel and steel alloys.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	62.86 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MT Series High-Speed Steel Point Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Select to compare

Configure now
Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coating, Long Shank, V-LT-POT

OSG

Select to compare

Configure now
Starting from^∗ ：	23.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.65 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

OSG

Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment, EX-H-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, General Long Shank, EX-LT-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare
Brand	OSG	OSG	OSG	SANDVIK	OSG	OSG	OSG	REX TOOLS	MISUMI	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	OSG	OSG	OSG	GEDORE	GEDORE	GEDORE	BERNSTEIN AG	WERA	WERA	REX TOOLS	REX TOOLS	REX TOOLS	REX TOOLS	REX TOOLS	REX TOOLS	STAHLWILLE	RUKO	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Point Tap Series, for General, EX-POT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	A Tap Series for Pipes Point Tap A-POT	SANDVIK CoroTap 100 Cutting Tap with Straight Flutes	Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT	Point Tap Series, V Coated, V-POT	Z-OIL-POT, High speed tapping in general steels and stainless steels	CNC tapping head set	TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】	Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT	Titanium coating point tab PO-V (N-PO-V)	Tap with Nickel Base Alloy ZEN-P	Point Tap PO(N-PO)	Carbide Tap for High Hardness Steel EH-CT	Carbide Tap for Ultra High Hardness Steel UH-CT	V-TI-POT, Powder metal spiral-point cutting tap for through holes, Metric	S-POT, HSSE spiral-point cutting tap for through holes, BSF	S-POT, HSSE spiral-point cutting tap for through holes, BA	S-POT 7G, HSSE spiral-point cutting tap for through holes, Metric	VA-POT, HSSE spiral-point cutting tap for through holes, UNF	E-POT, Powder metal spiral-point cutting tap for through holes, UNJF	Tap tool kit	Thread file	Treaded tool holder	Tap tool kit	Tapping combo head	Tapping combo head set	Die holder	Tapping combo head	Die guide bush set	Hand tap set	Thread repair kit	Tap extractor	Thread repair kit	Hand tap, Finish tap	High-Speed Steel Point Tap【10 Pieces Per Package】	MT Series High-Speed Steel Point Tap	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Point Tap Series, Tin Coated, TIN-POT	Point Tap Series, V Coating, Long Shank, V-LT-POT	Point Tap Series For Stainless Steel Use EX-SUS-POT	Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT	Point Tap Series, General Homo Treatment, EX-H-POT	Point Tap Series, General Long Shank, EX-LT-POT	Point Tap Series, Ultra Synchronizing Taps, HS-RFT
Starting from^∗	7.45 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.49 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.94 € *Unit price with basic configuration Volume Discount	-	22.83 € *Unit price with basic configuration Volume Discount	24.73 € *Unit price with basic configuration Volume Discount	56.20 € *Unit price with basic configuration	83.01 € *Unit price with basic configuration Volume Discount	13.81 € *Unit price with basic configuration Volume Discount	11.81 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	25.02 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	15.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	110.69 € *Unit price with basic configuration	99.90 € *Unit price with basic configuration	45.50 € *Unit price with basic configuration	27.00 € *Unit price with basic configuration	16.20 € *Unit price with basic configuration	19.80 € *Unit price with basic configuration	26.40 € *Unit price with basic configuration	39.90 € *Unit price with basic configuration	290.41 € *Unit price with basic configuration Volume Discount	74.28 € *Unit price with basic configuration Volume Discount	147.48 € *Unit price with basic configuration Volume Discount	66.60 € *Unit price with basic configuration Volume Discount	13.28 € *Unit price with basic configuration Volume Discount	87.75 € *Unit price with basic configuration Volume Discount	3.96 € *Unit price with basic configuration Volume Discount	10.05 € *Unit price with basic configuration Volume Discount	12.73 € *Unit price with basic configuration Volume Discount	11.68 € *Unit price with basic configuration Volume Discount	23.55 € *Unit price with basic configuration Volume Discount	17.92 € *Unit price with basic configuration Volume Discount	175.33 € *Unit price with basic configuration Volume Discount	5.27 € *Unit price with basic configuration Volume Discount	62.86 € *Unit price with basic configuration Volume Discount	7.00 € *Unit price with basic configuration Volume Discount	28.34 € *Unit price with basic configuration	15.45 € *Unit price with basic configuration Volume Discount	23.17 € *Unit price with basic configuration	8.65 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.35 € *Unit price with basic configuration Volume Discount	8.22 € *Unit price with basic configuration Volume Discount	14.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	30.20 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	Same day	6 Days	5 Days	6 Days	6 Days	2 Days	3 Days	5 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days	2 Days	2 Days	2 Days	2 Days	2 Days	2 Days	3 Days	3 Days	11 Days	3 Days	4 Days	4 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	5 Days	5 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days
Screw Types	Meter / Unified / Whitworth / Sewing Machine	Meter	Meter / Unified	Meter / Unified / Whitworth	Meter	Meter	-	-	Meter	Meter	Meter	Meter	Meter / Unified	Meter	Meter	-	-	-	-	-	-	-	-	-	-	Meter	Meter	-	-	-	-	-	-	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Unified / Whitworth	Meter	Meter	Meter	Meter
Screw size (Nominal)	No0UN ～ M48	M1.4 ～ M48	1/2-20UNF ～ M24	G 1" ～ M24	M3 ～ M24	M8 ～ M10	-	-	M3 ～ M10	M2 ～ M6	M3 ～ M12	M3 ～ M20	No.10-32UNF ～ M24	M3 ～ M12	M2 ～ M20	-	-	-	-	-	-	-	-	-	-	M3 ～ M10	-	-	M3 ～ M10	7 execution M3 - M12	M3 ～ Mf32	M5 ～ M12	M3 ～ M6	-	M2	M2 ～ M12	M2 ～ M24	M8	M1.4 ～ M42	M4 ～ M6	1UN ～ M42	M3 ～ M24	M2 ～ M42	M2 ～ M36	M3 ～ M14
Pitch (P), Number of Threading(mm)	0.25 ～ 80	0.3 ～ 5	0.25 ～ 3	-	0.5 ～ 3	1 ～ 1.25	-	-	0.5 ～ 1.5	0.4 ～ 1	0.5 ～ 1.75	0.5 ～ 2.5	0.75 ～ 2	0.5 ～ 1.75	0.4 ～ 2.5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.4 ～ 1.75	0.4 ～ 3	1.25	0.3 ～ 4.5	0.7 ～ 1	0.3 ～ 48	0.5 ～ 3	0.4 ～ 4.5	0.4 ～ 4	0.5 ～ 2
Chamfer threads (Lcf)	5P	5P	5P	-	5P	5P	-	-	5 P	6P	5P	4.5P	5P	5P	5P	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5 P	5 P	5P	5P	5P	4P	4P	5P	5P	6P
Tool Material Type	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Powder high-speed steel	High-speed steel	Carbide	Carbide	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	High-speed steel	Vanadium High-Speed Steel	Cobalt HSS	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (45 to 55 HRC)[○]	High Hardness Steel (50-60 HRC)[○]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
Tap Type	Point tap	Point tap	Point tap	-	Point tap	Point tap	-	-	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Hand Tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For through hole	For through hole	For through hole	-	For through hole	For through hole	-	-	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	For through hole	For through hole	For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Coating Y/N	N/A	N/A	Available	-	Available	Available	-	-	Available	N/A	Available	N/A	N/A	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	N/A	N/A	Available	Available	Available	N/A	N/A	N/A	N/A	Available
Coating Type	Non-Coated	Non-Coated	Other	-	TiN	TiCN	-	-	TiN	Non-Coated	TiN	-	-	TiAlN	TiAlN	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Non-Coated	Other	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN
Overall Length (L)(mm)	30 ～ 185	34 ～ 185	34 ～ 120	48 ～ 160	100 ～ 200	70 ～ 75	-	-	46 ～ 150	40 ～ 62	46 ～ 82	46 ～ 105	60 ～ 120	46 ～ 82	40 ～ 105	-	-	-	-	-	-	-	-	-	-	36 ～ 59	-	-	36 ～ 50	-	40 ～ 75	-	-	-	-	40 ～ 82	40 ～ 120	70	34 ～ 175	100	34 ～ 175	100 ～ 200	40 ～ 175	80 ～ 300	46 ～ 88