Roll Taps（Screw size (Nominal)：M1.2）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series for Steel NRT

OSG

Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Dry Processing Roll Tap OL+RZ / OL-RZ

YAMAWA MFG

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.84 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

High Performance Roll Tap HP+ RZ / HP-RZ

YAMAWA MFG

It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.84 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SANDVIK CoroTap 400 Forming Tap

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Groove-Free Tap Series, Tin Coated, TIN-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	33.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

IT-Toughlet C Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	67.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Short Chamfer Torqueless Roll Taps SC-TL-RZ

YAMAWA MFG

The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	44.46 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Titanium Coating Roll Tap R+V / R-V

YAMAWA MFG

A coating roll tap suitable for threading steel and nonferrous materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.28 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Groove-Free Tap Series IT New Roll IT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

IT-Toughlet TiCN Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Select to compare

Configure now
Starting from^∗ ：	67.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	YAMAWA MFG	YAMAWA MFG	SANDVIK	OSG	OSG	OSG	TANOI MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	TANOI MFG
Product Series	Groove-Free Tap Series X Performer S-XPF	Groove-Free Tap Series for Steel NRT	Dry Processing Roll Tap OL+RZ / OL-RZ	High Performance Roll Tap HP+ RZ / HP-RZ	SANDVIK CoroTap 400 Forming Tap	Groove-Free Tap Series, Tin Coated, TIN-NRT	Groove-Free Tap Series VP New Roll VP-NRT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	IT-Toughlet C Coated	Short Chamfer Torqueless Roll Taps SC-TL-RZ	Titanium Coating Roll Tap R+V / R-V	Groove-Free Tap Series IT New Roll IT-NRT	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	IT-Toughlet TiCN Coated
Starting from^∗	25.33 € *Unit price with basic configuration Volume Discount	14.56 € *Unit price with basic configuration Volume Discount	39.84 € *Unit price with basic configuration Volume Discount	39.84 € *Unit price with basic configuration Volume Discount	-	22.43 € *Unit price with basic configuration Volume Discount	24.33 € *Unit price with basic configuration Volume Discount	33.34 € *Unit price with basic configuration	67.02 € *Unit price with basic configuration Volume Discount	44.46 € *Unit price with basic configuration Volume Discount	38.28 € *Unit price with basic configuration Volume Discount	26.13 € *Unit price with basic configuration Volume Discount	26.13 € *Unit price with basic configuration Volume Discount	67.02 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	8 Days	8 Days	5 Days	6 Days	6 Days	6 Days	6 Days	9 Days	8 Days	6 Days	6 Days	6 Days
Screw Types	Meter	Meter	Meter	Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2	M1.2
Pitch (P), Number of Threading(mm)	0.25	0.25	0.25	0.25	-	0.25	0.25	0.25	0.2 ～ 0.25	0.25	0.25	0.25	0.25	0.2 ～ 0.25
Chamfer threads (Lcf)	2P ～ 4P	4P	4P	2P	-	2P ～ 4P	2P ～ 4P	2P ～ 4P	1P ～ 4P	1P	2P ～ 4P	2P	1P	1P ～ 4P
Tool Material Type	Vanadium High-Speed Steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	-	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
Tap Type	Roll tap	Roll tap	Roll tap	Roll tap	-	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap
Hole type	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	-	For blind hole	For blind hole	For blind hole	-	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	-
Coating Y/N	Available	N/A	Available	Available	-	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiCN	Non-Coated	TiCN	TiCN	-	TiN	TiCN	TiCN	Other	TiCN	TiN	TiCN	TiCN	TiCN
Overall Length (L)(mm)	32	32	36	36	40	32	32	60	32	36	36	32	32	32

Filter by:

Screw Types
- Meter
- Unified
- Miniature
- Other
Clear

Screw size (Nominal)
No0UN

No.10-32UNF

No.10-24UNC

No.12-28UNF

No.12-24UNC

No.2

No.2-64UNF

No.2-56UNC

No.3-56UNF

No.3-48UNC

No.4

No.4-48UNF

No.4-40UNC

S0.5

No.5-44UNF

No.5-40UNC

No.6

S0.6

No.6-40UNF

No.6-32UNC

S0.7

S0.8

No.8-36UNF

No.8-32UNC

S0.9

M1

No1UN

UNC 1"

UNF 1"

UNC 1/2

UNF 1/2

1/4UN

UNC 1/4

UNF 1/4

1/4-28UNF

1/4-20UNC

M1.1

M1.2

M1.4

M1.6

M1.7

M1.8

M2

No2UN

M2.2

M2.3

M2.5

M2.6

EGM 3

M3

No3UN

UNC 3/4

UNF 3/4

UNC 3/8

UNF 3/8

M3 - M10

M3 - M12

M3.5

EGM 4

M4

No4UN

UNC 4

EGM 5

M5

MF5

No5UN

UNC 5/8

UNF 5/8

M5 - M12

UNC 5/16

UNF 5/16

EGM 6

M6

MF6

No6UN

UNC 6

No6-40UNF

M7

MF7

7 execution M3 - M12

UNC 7/8

UNC 7/16

UNF 7/16

EGM 8

M8

MF8

No8UN

UNC 8

M9

EGM 10

M10

MF10

No10UN

UNC 10

UNF 10

M11

EGM 12

M12

MF12

Mf12

No12UN

UNC 12

M12 x 1.5

M14

MF14

M16

Mf16

M16 x 1.5

M18

M20

Mf20

M20 x 1.5

M22

M24

Mf25

M25 x 1.5

M27

M30

Mf32

M33

M36

M42

M45
Clear

Pitch (P), Number of Threading(mm)
.02

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

20

24

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

2

2 P

2P

2.5P

3P

4

4 P

4P

8P
Drawing

Clear

Tool Material Type
- High-speed steel
- Powder high-speed steel
- Carbide
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Steel casting (SC)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
Clear

Tap Type
- Roll tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiCN
- TiN
- CrN
- Non-Coated
- Other
Details

Clear

Overall Length (L)(mm)
30

32

33

34

35

36

39

40

41

42

44

44.5

45

46

47.625

48

50

50.8

51

52

53

53.975

55

56

58

59

60

60.325

62

63

63.5

65

66

69.063

70

72

74.625

75

80

82

85

88

89

90

95

100

102

105

110

120

125

140

150

160

180

200

220
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (7)
- YAMAWA MFG (4)
- TANOI MFG (2)
- SANDVIK (1)
- WERA (0)
- FEIN (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- NACHI(FUJIKOSHI) (0)
- GEDORE (0)
- HAZET (0)
- REX TOOLS (0)
- GUHRING (0)
Clear