Thread Cutters（work material：Low-Carbon Steel (carbon alloy less than 0.25%)）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices- Volume Discount
Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole PG
CARMEX
For both internal and external diameters.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 390.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws
CARMEX
Metric thread / for I.D. thread
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 212.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.- Volume Discount
Configure nowStarting from∗ ： 222.23 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.- Volume Discount
Configure nowStarting from∗ ： 181.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
Configure nowStarting from∗ ： 181.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Configure nowStarting from∗ ： 101.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series MC-Planet Cutters PNGT
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Configure nowStarting from∗ ： 205.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Configure nowStarting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
OSG
By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.Configure nowStarting from∗ ： 165.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MMTS Micro Threading Tool
NS TOOL
Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken- Volume Discount
Configure nowStarting from∗ ： 100.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MC - Helical Cutter MC-HLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Configure nowStarting from∗ ： 253.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide MC - Helical Cutter MC-CSLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Configure nowStarting from∗ ： 295.34 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Metric Screw (ISO)
CARMEX
Enables internal threading to be performed in a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread G (55°)
CARMEX
Threading can be performed for both internal and external threads with a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Unified Screw (UN)
CARMEX
For internal threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread BSPT
CARMEX
For both internal and external threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread NPT
CARMEX
For both inner/outer diameter threads.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread NPTF
CARMEX
For both inner/outer diameter threads.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole ISO
CARMEX
Metric thread / for I.D.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mill Thread G (55°) Solid Carbide with Oil Hole
CARMEX
Whitworth screw, I.D./O.D. common type.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole BSPT
CARMEX
BSPT thread, I.D./O.D. common type.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole UN
CARMEX
For unified screws and inner diameter screws.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole NPT
CARMEX
NPT thread, I.D./O.D. common type.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole NPS
CARMEX
Internal and external use inch shank.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole NPSF
CARMEX
Inch shank for both inner and outer diameters.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTZ Jet Mill Thread with Oil Hole ISO
CARMEX
For metric I.D. thread.
[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.Configure nowStarting from∗ ： 263.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTZ Jet Mill Thread with Oil Hole BSPT
CARMEX
For both internal and external threading.
[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.Configure nowStarting from∗ ： 305.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTZ Jet Mill Thread with Oil Hole BSW
CARMEX
For both internal and external threading.
[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.Configure nowStarting from∗ ： 263.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads
CARMEX
For internally threaded metric screws.
[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3DConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw
CARMEX
For internally threaded unified screws.
[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3DConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid for Outer Diameter, Mill Thread ISO
CARMEX
Metric thread / for O.D. thread.
[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutesConfigure nowStarting from∗ ： 342.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid for Outer Diameter, Mill Thread UN
CARMEX
For unified screws and outer diameter screws.
[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutesConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Tapered End Mill
CARMEX
[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened- Volume Discount
Configure nowStarting from∗ ： 119.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mini Mill Thread G55°
CARMEX
For both G (55°) inner and outer diameter thread (MT7).
[Features]
· Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
· Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
· Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
· Because high-speed cutting can be performed, machining time is shortened.
· The blade length is short (3 ridges), so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.
· Enables thread cutting of difficult-to-cut and high hardness materials.Configure nowStarting from∗ ： 211.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Jet Mini Mill Thread for Aircraft UNJ
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Configure nowStarting from∗ ： 213.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Jet Mini Mill Thread for Aircraft MJ
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Configure nowStarting from∗ ： 217.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread, No Finishing Flute 60°
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.Configure nowStarting from∗ ： 208.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole
CARMEX
With internal coolant hole, up to screw depth D1 x 2.
[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.Configure nowStarting from∗ ： 298.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole
CARMEX
With internal coolant hole, up to screw depth D1 x 2.
[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.Configure nowStarting from∗ ： 304.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultrafine particle carbide and new type three-layer PVD coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Thread Cutting Tool (for Unified Threads) MMTU
NS TOOL
[Features]
・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.
・ Adopts MUGEN Coating Premium for the realization of a long life.
・ For Unified Standard threadsConfigure nowStarting from∗ ： 108.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 128.63 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | CARMEX | CARMEX | CARMEX | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | NS TOOL | YAMAWA MFG | YAMAWA MFG | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | NS TOOL | YAMAWA MFG |
| Product Series | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters | MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC | Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads | For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw | DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole | DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | |||||||||||||||||||||||||||||||
| Starting from∗ | 110.87 € *Unit price with basic configuration Volume Discount | 390.01 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 212.85 € *Unit price with basic configuration | 222.23 € *Unit price with basic configuration Volume Discount | 181.78 € *Unit price with basic configuration Volume Discount | 181.83 € *Unit price with basic configuration Volume Discount | 101.50 € *Unit price with basic configuration Volume Discount | 205.83 € *Unit price with basic configuration | 158.30 € *Unit price with basic configuration Volume Discount | 165.90 € *Unit price with basic configuration | 100.28 € *Unit price with basic configuration Volume Discount | 253.22 € *Unit price with basic configuration | 295.34 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 263.46 € *Unit price with basic configuration | 305.88 € *Unit price with basic configuration | 263.46 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 342.45 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 119.87 € *Unit price with basic configuration Volume Discount | 211.31 € *Unit price with basic configuration | 213.39 € *Unit price with basic configuration | 217.83 € *Unit price with basic configuration | 208.53 € *Unit price with basic configuration | 298.23 € *Unit price with basic configuration | 304.42 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 108.22 € *Unit price with basic configuration | 128.63 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 7 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 8 Days |
| Screw Types | Meter | Other | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter / Taper for Pipe / Parallel for Pipes | Meter / Unified / Taper for Pipe | Meter | Other | Meter / Taper for Pipe / Parallel for Pipes | Meter / Taper for Pipe / Parallel for Pipes | Meter | Parallel for Pipes | Unified | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | Parallel for Pipes | Parallel for Pipes | Unified | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | Parallel for Pipes | Whitworth | Meter | Unified | Meter | Unified | Taper for Pipe | Whitworth | Other | Other | Meter | Meter | Unified | Meter | Unified | Meter |
| Screw size (Nominal) | M3 ～ M20 | - | - | M1 ～ M3 | M2 ～ M12 | M1.4 ～ M20 | M3 ～ M12 | - | - | - | - | S0.1 ～ S1.4 | 1015 ～ 32506N300M | 06510X28R ～ 200505N300M | M3 ～ M27 | - | - | - | - | - | M4 ～ M24 | - | - | - | - | - | - | M6 ～ M20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NO.0-80UNF ～ 1/4-20UNC | 3.5 ～ 9 |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 2.5 | - | - | 0.25 ～ 0.5 | 0.4 ～ 1.75 | 0.3 ～ 2.5 | 0.5 ～ 1.75 | 0.25 ～ 32 | 1 ～ 19 | 1 ～ 28 | 0.5 ～ 3 | 0.025 ～ 0.3 | - | 0.5 ～ 3 | 0.5 ～ 3 | 11 ～ 28 | - | - | - | - | 0.5 ～ 3 | - | - | - | - | - | - | 1 ～ 2.5 | - | - | 1 ～ 4 | - | 1 ～ 2 | - | - | - | - | - | - | 1 ～ 2 | - | - | - | 1 |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] |
| Tap Type | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter |
| Hole type | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | - |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiAlN | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / Other | TiN | TiAlN | TiAlN | TiAlN | TiN | TiAlN | TiAlN | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | TiAlN | Other |
| Overall Length (L)(mm) | 57 ～ 115 | 84 | 39 ～ 64 | 39 | 58 ～ 73 | 39 ～ 105 | 48 ～ 74 | 40 | 80 ～ 210 | 60 ～ 120 | 60 ～ 120 | 45 | 70 ～ 200 | 50 ～ 140 | 58 ～ 120 | 58 ～ 105 | 58 ～ 105 | 58 ～ 105 | 58 ～ 105 | 58 ～ 105 | 58 ～ 120 | 64 ～ 105 | 64 ～ 105 | 64 ～ 105 | 64 ～ 73 | 63 ～ 76 | 63 ～ 76 | 58 ～ 101 | 64 ～ 101 | 58 ～ 73 | 73 ～ 160 | 73 ～ 105 | 73 ～ 84 | 73 ～ 84 | 58 ～ 84 | 64 ～ 105 | 58 ～ 73 | 58 ～ 64 | 58 ～ 101 | 64 ～ 84 | 64 | 39 ～ 58 | 45 | - |
Loading...
Filter by:
-
Screw Types
- Meter
- Unified
- Whitworth
- Taper for Pipe
- Parallel for Pipes
- Other
-
Screw size (Nominal)
- NO.0-80UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- NO.10-24UNC
- NO.12-28UNF
- NO.12-24UNC
- S0.2
- NO.2-64UNF
- NO.2-56UNC
- S0.3
- NO.3-56UNF
- NO.3-48UNC
- S0.4
- NO.4-48UNF
- NO.4-40UNC
- S0.5
- NO.5-44UNF
- NO.5-40UNC
- S0.6
- NO.6-40UNF
- S0.8
- NO.8-36UNF
- NO.8-32UNC
- M1
- S1
- UNC 1
- G1"-3"
- G1/2 5/8
- G1/4
- UNC 1/4
- UNF 1/4
- 1/4-28UNF
- 1/4-20UNC
- G1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M2
- UNC 2
- UNF 2
- M2.2
- M2.5
- M3
- UNC 3
- UNF 3
- G3/8
- M3 - M10
- M3 - M12
- 3.5
- M3.5
- 4
- M4
- UNC 4
- UNF 4
- M5
- G5/8 3/4
- M5 - M12
- UNC 5/16
- UNF 5/16
- 6
- M6
- MF6
- UNC 6
- UNF 6
- 7 execution M3 - M12
- 7.5
- M8
- MF8
- UNC 8
- 9
- M10
- MF10
- UNC 10
- UNF 10
- M12
- MF12
- Mf12
- M12 x 1.5
- M14
- MF14
- M16
- MF16
- Mf16
- M16 x 1.5
- M18
- M20
- MF20
- Mf20
- M20 x 1.5
- M22
- M24
- MF24
- Mf25
- M25 x 1.5
- M27
- MF28
- Mf32
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- CARMEX (31)
- OSG (4)
- YAMAWA MFG (3)
- NS TOOL (2)
- WERA (0)
- FEIN (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- GUHRING (0)
- GEDORE (0)
- SANDVIK (0)
- HAZET (0)
- REX TOOLS (0)
CAD data type
-
- 2D
- 3D
Categories related to Thread Cutters
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.