Chamfering / Centering Tools（Tool Material Type：Carbide）
Search by sub-category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 49.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 71.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 39.57 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide NC Center Drill 1107
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.- Volume Discount
Configure nowStarting from∗ ： 71.20 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Toglon Sharp SP 60° Carbide
IWATA TOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 94.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Configure nowStarting from∗ ： 93.69 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack
MISUMI
A carbide countersink that's essential in chamfering and deburring- Volume Discount
Configure nowStarting from∗ ： 80.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Configure nowStarting from∗ ： 81.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NC Spot Drill for 90°
NINE9
Carbide insert type NC spot drill. High efficiency. Low cost. For CNC lathe, CNC lathe, machining centerConfigure nowStarting from∗ ： 243.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Center Drill Noncoat KCD-60
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.Configure nowStarting from∗ ： 75.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 33.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
MISUMI
The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.- Volume Discount
- TS
- SUS
- 2 Flutes
Configure nowStarting from∗ ： 74.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Center Drill, 90° Chamfering Model
MISUMI
Carbide center drill that's ideal for centering in mass production drilling- Volume Discount
Configure nowStarting from∗ ： 82.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 41.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide NC Center Drill 1106
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.- Volume Discount
Configure nowStarting from∗ ： 68.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 208.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° Carbide
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 79.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 60° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Configure nowStarting from∗ ： 111.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Throw-Away Tip for C-Cutter Boy
BIG KAISER
[Features]
· An economical type with long life that allows 3 corners of the carbide tip to be usedConfigure nowStarting from∗ ： 11.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Milling Cutter for 120° Chamfering Type N 6714
GUHRING
Taper half-angle 60° chamfering milling cutter.- Volume Discount
Configure nowStarting from∗ ： 53.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Milling Cutter for 90° Chamfering Type N 6713
GUHRING
Taper half-angle 45° chamfering milling cutter.Configure nowStarting from∗ ： 50.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NC Spotting Drill 120° 724
GUHRING
[Features]
· Allows simultaneous centering and chamfering.- Volume Discount
Configure nowStarting from∗ ： 89.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NC Spotting Drill 120° F724
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.- Volume Discount
Configure nowStarting from∗ ： 103.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Carbide Chamfering Cutter KMC-2
KYOWA SEIKO
[Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.- Volume Discount
Configure nowStarting from∗ ： 42.95 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMW-4
KYOWA SEIKO
4 straight cutting edges.
90° (including angle type)
Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/Resin
Single-edged blade
Tool quality, carbide.Configure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.Configure nowStarting from∗ ： 47.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Configure nowStarting from∗ ： 111.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 48.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 42.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 38.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide inner R-cutter, 2-flute
MISUMI
[Features]
Easy high-quality machining of corner radii
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 50.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide inner R-cutter, 2-flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 49.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shot- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Configure nowStarting from∗ ： 40.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burr- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Configure nowStarting from∗ ： 72.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single tool with high efficiency that's capable of all centering, chamfering and V grooving- Volume Discount
Configure nowStarting from∗ ： 55.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack
MISUMI
Carbide spot drill that contributes to higher efficiency in chamfering- Volume Discount
Configure nowStarting from∗ ： 43.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide NC Spot Drill
MISUMI
The non-coated design allows the edge of the tip to stand, achieving the high cut-off performance.- Volume Discount
Configure nowStarting from∗ ： 52.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long
MISUMI
Carbide center drill that's ideal for centering in mass production drilling- Volume Discount
Configure nowStarting from∗ ： 61.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 74.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 37.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 32.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 43.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NINE9 | MISUMI | NINE9 | DIXI | IWATA TOOL | MAKOTOLOY | MISUMI | OSG | NINE9 | KYOWA SEIKO | OSG | MISUMI | MISUMI | MISUMI | DIXI | EIKOSHA | IWATA TOOL | IWATA TOOL | BIG KAISER | GUHRING | GUHRING | GUHRING | GUHRING | KYOWA SEIKO | KYOWA SEIKO | 7 LEADERS | NS TOOL | MAKOTOLOY | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack | 2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS coated carbide chamfering end mill, 2-flute / short model | TS coated carbide chamfering end mill, 3-flute / short model | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 49.39 € *Unit price with basic configuration | 71.59 € *Unit price with basic configuration Volume Discount | 39.57 € *Unit price with basic configuration | 71.20 € *Unit price with basic configuration Volume Discount | 94.31 € *Unit price with basic configuration | 93.69 € Special price *Unit price with basic configuration Promotional pricing | 80.16 € *Unit price with basic configuration Volume Discount | 81.19 € *Unit price with basic configuration Volume Discount | 243.68 € *Unit price with basic configuration | 75.96 € *Unit price with basic configuration | 33.77 € *Unit price with basic configuration | 74.67 € *Unit price with basic configuration Volume Discount | 82.15 € *Unit price with basic configuration Volume Discount | 41.90 € *Unit price with basic configuration Volume Discount | 68.46 € *Unit price with basic configuration Volume Discount | 208.09 € *Unit price with basic configuration | 79.43 € *Unit price with basic configuration | 111.05 € *Unit price with basic configuration | 11.40 € *Unit price with basic configuration | 53.13 € *Unit price with basic configuration Volume Discount | 50.44 € *Unit price with basic configuration | 89.15 € *Unit price with basic configuration Volume Discount | 103.33 € *Unit price with basic configuration Volume Discount | 42.95 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 109.96 € *Unit price with basic configuration | 47.28 € *Unit price with basic configuration | 111.08 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 48.89 € *Unit price with basic configuration Volume Discount | 42.10 € *Unit price with basic configuration Volume Discount | 38.81 € *Unit price with basic configuration Volume Discount | 46.59 € *Unit price with basic configuration Volume Discount | 50.04 € *Unit price with basic configuration Volume Discount | 49.42 € *Unit price with basic configuration Volume Discount | 40.79 € *Unit price with basic configuration Volume Discount | 72.54 € *Unit price with basic configuration Volume Discount | 55.87 € *Unit price with basic configuration Volume Discount | 43.49 € *Unit price with basic configuration Volume Discount | 52.50 € *Unit price with basic configuration Volume Discount | 61.66 € *Unit price with basic configuration Volume Discount | 74.16 € *Unit price with basic configuration Volume Discount | 37.62 € *Unit price with basic configuration Volume Discount | 42.61 € *Unit price with basic configuration Volume Discount | 32.62 € *Unit price with basic configuration Volume Discount | 43.97 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 5 Days | Same day | 8 Days | 6 Days | Same day | 5 Days | 6 Days | 6 Days | 8 Days | 6 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 8 Days | 6 Days | 6 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Application | Centering (Positioning) / Engraved | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | - | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Chamfering/Horizontal | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove |
| Tip angle (θ) | 45 ～ 60 | 60 ～ 120 | 60 ～ 90 | 90 ～ 120 | 60 | 90 | - | 90 | 90 | 120° | - | 90 | - | - | 90 | - | 90 | 60 | 45 | 120 | 90 | 120 | 120 | 90° | - | 90 | 45° | 120 | 90 | 90 | 60 ～ 120 | 90 | - | - | 90 | 90 | 60 ～ 120 | 90 ～ 120 | - | - | - | - | - | - | - |
| Tool Diameter (D)(mm) | 0.45～2.1 ～ 0.65～2.7 | 3 ～ 16 | 1–6 ～ 3 to 15 | 3 ～ 20 | 1.2 ～ 16 | 1 ～ 20 | 6.3 ～ 20.5 | 0.8 ～ 1 | 6 | 0.3 ～ 3 | 4 ～ 12 | 3 ～ 12 | 1 ～ 4 | - | 3 ～ 20 | 3.8 ～ 13.4 | 1.2 ～ 16 | 0.6 ～ 4 | - | 4 ～ 12 | 4 ～ 12 | 5 ～ 20 | 5 ～ 20 | 0.3 ～ 4 | - | 0.5 ～ 20 | 4 ～ 6 | 1 ～ 20 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | - | - | 3 ～ 12 | 3 ～ 12 | 0.5 ～ 2 | 2 ～ 12 | 0.3 ～ 2 | 0.5 ～ 5 | - | - | - | - | - |
| work material | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | - | General Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | - | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎] | General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | General Steel[○] / Aluminum[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / High Hardness Steel[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | - | - | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | - | Single blade | Double-edged | Single blade | - | - | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | N/A | N/A | N/A | - | N/A | - | N/A | N/A | N/A | - | - | N/A | N/A | Available | - | - | N/A | N/A | - | - | - | - | - | - | - | - | Available | - | Available | N/A | Available | Available | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Y/N | Available | Available | Available | N/A | N/A | N/A | Available | N/A | N/A | N/A | Available | Available | Available | Available | N/A | - | N/A | Available | Available | Available | Available | N/A | Available | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | Available | Available | N/A | Available | Available | Available | Available | Available | Available |
| Coating Type | TiAlN / TiN | TS | TiAlN / TiN / DLC | - | - | - | TiAlN | Non-Coated | Non-Coated | - | - | TS | TiAlN | AlCrN | - | - | - | Other | Other | TiAlN | TiAlN | - | Other | - | - | Other | TiAlN | TiAlN | TS | TS | TS | TS | TS | - | - | - | TiAlN | TiAlN | - | TiAlN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | 0.2 ～ 5 | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.92
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 9.53
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 15.88
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Brand
-
- IWATA TOOL (27)
- MAKOTOLOY (22)
- OSG (18)
- GUHRING (9)
- ATOM (8)
- EIKOSHA (8)
- KYOWA SEIKO (7)
- YAMAWA MFG (7)
- NS TOOL (5)
- THE CUT (5)
- DIJET (4)
- SANKO MFG (4)
- ASAHI TOOLS (3)
- DIXI (3)
- NINE9 (3)
- NAKAJIMAKOUKI (2)
- OKAZAKI SEIKO (2)
- SANDVIK (2)
- 7 LEADERS (1)
- BIG KAISER (1)
- RYOKO SEIKI (1)
- TAIYO-TOOL (1)
- UNION TOOL (1)
- PREVOST (0)
- MAPAL (0)
- NIKKEN KOSAKUSHO (0)
- STAR-M (0)
- WALTER TITEX (0)
- SKC (0)
- SPEED TIGER (0)
- FUKUDA (0)
- ESCO (0)
- NT TOOL (0)
- WERA (0)
- FUJIGEN (0)
- WATERMILLS (0)
- TRUSCO NAKAYAMA (0)
- METABO (0)
- ALPEN (0)
- ILIX (0)
- DAIICHITOOL (0)
- REX TOOLS (0)
- WOLFCRAFT (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.