Tap Holders（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Drill Holder for Drill Tappers
BIG KAISER
[Features]
You can easily replace a drill holder.
-Minimum order quantity: 1 piece.Configure nowStarting from∗ ： 93.22 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (BBT Shank)
BIG KAISER
[Features]
· Thrust load caused by synchronization error is reduced to 1/10 to improve thread precision and tap longevity.
· In addition to various tap sizes, the long tap holder is standardized.Configure nowStarting from∗ ： 182.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (MGT12)
BIG KAISER
[Features]
· From short to long (150 mm, 200 mm), a wide range of tap holders to deal with workpiece interference flexiblyConfigure nowStarting from∗ ： 85.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (MGT20)
BIG KAISER
[Features]
· From short to long (150 mm, 200 mm), a wide range of tap holders to deal with workpiece interference flexiblyConfigure nowStarting from∗ ： 105.92 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (MGT6)
BIG KAISER
[Features]
· From short to long (150 mm, 200 mm), a wide range of tap holders to deal with workpiece interference flexiblyConfigure nowStarting from∗ ： 88.42 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (ST Shank)
BIG KAISER
[Features]
· Thrust load caused by synchronization error is reduced to 1/10. Screw accuracy and tap life are improved.
· In addition to various tap sizes, the long tap holder is also standardized.Configure nowStarting from∗ ： 160.00 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (Small Diameter Tap for MGT3)
BIG KAISER
[Features]
· As well as the synchronization error correction mechanism, stable small diameter tap processing is enabled by controlling the dynamic runout accuracy when rotating at high speedConfigure nowStarting from∗ ： 334.00 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (Small Diameter for MTG3)
BIG KAISER
[Features]
-For small diameter taps.
-Reduces thrust forces due to synchronisation errors to 1/10 and improves tapping accuracy and tap life.
-A sufficient flow path for coolant is ensured so that coolant can escape from the slot and grease hole even when using a tap with a grease hole.Configure nowStarting from∗ ： 290.00 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (Large Diameter Tap for MGT36)
BIG KAISER
[Features]
· Compensates for axial misalignment due to synchronization error, and dramatically reduces load during machining.
· Structure smoothly complies even with excessive cutting torque of large diameter taps.Configure nowStarting from∗ ： 625.00 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Mega Synchro Tapping Holder (Large Diameter Tap Holder for MGT36)
BIG KAISER
[Features]
· Dual face contact, center-through typeConfigure nowStarting from∗ ： 240.00 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
BT Shank Tap Holder
YUKIWA SEIKO
Torque control that boasts outstanding durability. Revolutionary. Double Roller Clutch MechanismConfigure nowStarting from∗ ： 372.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tang Type MT Shank Tap Holder
YUKIWA SEIKO
Torque control that boasts outstanding durability. Revolutionary. Double Roller Clutch MechanismConfigure nowStarting from∗ ： 305.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
BT30 Floating Tap Holder
YUKIWA SEIKO
[Features]
· Built-In radial direction float: Has a built-in radial direction float, which means it corrects core misalignment between the spindle and workpiece and is suitable for precision tapping.Configure nowStarting from∗ ： 450.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Nonstop Chuck Holder
NIKKEN KOSAKUSHO
[Features]
· Chuck holder for the nonstop drill tapping series.Configure nowStarting from∗ ： 242.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
General Purpose Tapper Chuck
NIKKEN KOSAKUSHO
[Features]
· Ideal for mass production of tap work only.
· Equipped with a safe clutch to eliminate the risk of breaking and provide a long service life.
· A float mechanism is built into the tap holder itself.
· Collet Sold SeparatelyConfigure nowStarting from∗ ： 253.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Single Action Tap Collet
NIKKEN KOSAKUSHO
[Features]
· Rotary bearing cam mechanism provides high accuracy, high sensitivity, and long service life.
· It can be used with all tapper chucks.
· Reverse torque is 1.4 times greater than forward torque
· Prevents cutting powder trouble
· One-touch Clamp Tap
· Incredibly easy operation
· ZKG tap collets do not have a built-in mechanism for adjusting set torqueConfigure nowStarting from∗ ： 109.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
ZKN Tap Collet
NIKKEN KOSAKUSHO
[Features]
· Rotary bearing cam mechanism provides high accuracy, high sensitivity, and long service life. It can be used with all tapper chucks.Configure nowStarting from∗ ： 179.76 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Tap Collet for NC Lathe
NIKKEN KOSAKUSHO
[Features]
· Tap collet for NC lathes. Without torque adjustment mechanism.Configure nowStarting from∗ ： 116.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Automatic Sizing Tapper Chuck
NIKKEN KOSAKUSHO
[Features]
· Ideal for gas taps, taps with a base, and lightweight alloys. When the machine forward feed is stopped at a designated point, the tap will continue for the set amount only (4 mm for ZL12 type) before idling.
· Simply reverse it afterwards to align the tap depth at high precision.Configure nowStarting from∗ ： 242.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Tapper Chuck
NIKKEN KOSAKUSHO
[Features]
· A tapper ideal for interactive machining centers.
· Enables safe and reliable tapping, with stable torque and slim design that further improve ease of use.
· Unmanned operation-orientated tap holding system (PAT).
· No deflection, detachment, or breakage.Configure nowStarting from∗ ： 251.16 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Tap Holder for Old Type Synchro Device
NIKKEN KOSAKUSHO
[Features]
· Former Synchro Tap Holder type.
* Once the stock for this product runs out, sales will be discontinued. Thereafter, use the new ZH-C type.
· Equipped with a small floating mechanism.Configure nowStarting from∗ ： 263.78 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MT/JT Shank A Type
KATO MFG
[Features]
· Automatic reverse type for tabletop drilling machines
· Built-in torque adjustment type safety device
· Tap can be removed efficiently at twice the speedConfigure nowStarting from∗ ： 1,001.83 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
HSK Shank Mega Synchro Tapping Holder (For Small Diameter Taps)
BIG KAISER
[Features]
· Thrust load caused by synchronization error is reduced to 1/10, to improve thread accuracy and tap longevity.Configure nowStarting from∗ ： 463.00 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,501.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,397.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,151.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,509.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,216.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,509.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,993.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： Quote -
Configure now
Starting from∗ ： 973.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,734.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Check Master, Inch
MITUTOYO
This Check Master allows you to test precision tool and coordinate measuring machines, and offers you the following benefits:
- You can test the X, Y and Z-coordinate axes of precision tool machines and coordinate measuring machines.
- It consists of rigidly clamped gauge blocks with a step of 10mm.
- It is supplied in a fitted wooden case.Configure nowStarting from∗ ： 3,388.16 € Min. Shipping Days ： 60 Days *Unit price with basic configuration
-
Adaptor,Carbon Fiber
MITUTOYO
Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up.Configure nowStarting from∗ ： 127.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adaptor, Stainless Steel, Conical Base
MITUTOYO
Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. Stainless steel is the primary material of choice for high-strength precision components.Configure nowStarting from∗ ： 18.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adaptor, Stainless Steel
MITUTOYO
Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. Stainless steel is the primary material of choice for high-strength precision components.Configure nowStarting from∗ ： 15.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adaptor, Ceramic
MITUTOYO
Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. The very lightweight and extremely stiff character of ceramic materials and its low thermal expansion, makes it the ideal material. The brittle characteristic can protect probes from the effects of crash.Configure nowStarting from∗ ： 75.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Chuck Type |
| Holder Length L(mm) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | BIG KAISER | BIG KAISER | BIG KAISER | BIG KAISER | BIG KAISER | BIG KAISER | BIG KAISER | BIG KAISER | BIG KAISER | BIG KAISER | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | NIKKEN KOSAKUSHO | NIKKEN KOSAKUSHO | NIKKEN KOSAKUSHO | NIKKEN KOSAKUSHO | NIKKEN KOSAKUSHO | NIKKEN KOSAKUSHO | NIKKEN KOSAKUSHO | NIKKEN KOSAKUSHO | KATO MFG | BIG KAISER | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO |
| Product Series | Mega Synchro Tapping Holder (Large Diameter Tap Holder for MGT36) | HSK Shank Mega Synchro Tapping Holder (For Small Diameter Taps) | ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 93.22 € *Unit price with basic configuration | 182.00 € *Unit price with basic configuration | 85.17 € *Unit price with basic configuration | 105.92 € *Unit price with basic configuration | 88.42 € *Unit price with basic configuration | 160.00 € *Unit price with basic configuration | 334.00 € *Unit price with basic configuration | 290.00 € *Unit price with basic configuration | 625.00 € *Unit price with basic configuration | 240.00 € *Unit price with basic configuration | 372.04 € *Unit price with basic configuration | 305.38 € *Unit price with basic configuration | 450.35 € *Unit price with basic configuration | 242.51 € *Unit price with basic configuration | 253.66 € *Unit price with basic configuration | 109.55 € *Unit price with basic configuration | 179.76 € *Unit price with basic configuration | 116.84 € *Unit price with basic configuration | 242.71 € *Unit price with basic configuration | 251.16 € *Unit price with basic configuration | 263.78 € *Unit price with basic configuration | 1,001.83 € *Unit price with basic configuration | 463.00 € *Unit price with basic configuration | 1,501.00 € *Unit price with basic configuration | 1,397.23 € *Unit price with basic configuration | 1,151.69 € *Unit price with basic configuration | 1,509.77 € *Unit price with basic configuration | 1,216.00 € *Unit price with basic configuration | 1,509.77 € *Unit price with basic configuration | 1,993.54 € *Unit price with basic configuration | - | 973.38 € *Unit price with basic configuration | 1,734.85 € *Unit price with basic configuration | 3,388.16 € *Unit price with basic configuration | 127.63 € *Unit price with basic configuration | 18.95 € *Unit price with basic configuration | 15.79 € *Unit price with basic configuration | 75.79 € *Unit price with basic configuration |
| Min. Shipping Days | 7 Days | 5 Days | 5 Days | 7 Days | 7 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 9 Days | 10 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Quote | 5 Days | 5 Days | 60 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Product Category | Attachments/Accessories | Main Body | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Main Body | Attachments/Accessories | Main Body | Attachments/Accessories | Main Body | Main Body | Main Body | Attachments/Accessories | Main Body | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Main Body | Main Body | Main Body | Main Body | Main Body | - | - | - | - | - | - | - | - | - | - | Measuring equipment | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories |
| Applicable Manufacturing Machinery (main unit) | - | Machining Centers | - | - | - | - | Machining Centers | - | Machining Centers | - | Machining Centers | Generic Machine | Machining Centers | - | - | - | - | - | Machining Centers | Machining Centers | Machining Centers | Generic Machine | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Spindle types | - | BT30 / BT40 / BT50 | - | - | - | - | BT30 | - | BT50 | - | BT30 / BT40 / BT50 | - | BT30 | - | - | - | - | - | BT30 / BT40 / BT50 | BT40 / BT50 | BT50 | - | HSK-A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | Drill | Tap | Tap | Tap | - | - | Tap | - | Tap | Tap | - | - | - | - | Tap | Tap | Tap | Tap | Tap | Tap | Tap | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | ～32 ～ Up to 50 | - | - | - | - | - | - | - | M3～M6 ～ M4～M12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Side lock | - | - | - | Side lock | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | 100/140/170 ～ 145/195/225 | 30 ～ 200 | 35 ～ 150 | 30 ～ 200 | 95/135/165 ～ 125/175/205 | 70 | 90 | 190 | - | - | - | - | 75 ～ 98 | 97 ～ 192 | - | - | - | 85 ～ 190 | 90 ～ 220 | 90 | 120 ～ 137 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | Center Through (Blade Through) | - | - | - | - | Center Through (Blade Through) | - | Center Through (Blade Through) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
-
Product Category
-
Applicable Manufacturing Machinery (main unit)
-
Spindle types
-
HSK type
-
Tool Type
-
Retainable blade diameter(mm)
-
Chuck Type
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 24.5
- 26.5
- 29
- 29.5
- 30
- 34
- 35
- 66
- 70
- 75
- 82
- 84
- 84.5
- 85
- 90
- 90.5
- 93
- 95/135/165
- 97
- 97.5
- 98
- 100
- 100/140/170
- 105
- 105/145/175
- 109
- 110
- 112
- 113
- 115
- 120
- 120/160/190
- 123
- 125
- 125/175/205
- 127
- 129.5
- 130
- 130/180/210
- 131.5
- 132
- 135
- 137
- 140
- 140/190/220
- 142
- 143
- 145
- 145/195/225
- 148
- 149.5
- 150
- 155
- 156
- 160
- 163
- 165
- 170
- 174.0
- 175
- 176.5
- 181
- 185
- 187
- 190
- 192
- 195
- 200
- 210
- 218
- 220
- 225
- 226.0
- 240
- 255
- 275
- 285
- 375
-
Coolant System
Brand
CAD data type
-
- 2D
- 3D
Categories related to Tap Holders
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.