Wheels with Shafts（Application：Polishing）

121

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 13 Days or Less

?* Information on days to ship and prices

Buff for Finish Polishing

DREMEL

Ideal for light polishing and dirt removal. Fine file #512 is ideal for rust removal on brass. * Use at speeds of 15,000 rpm or less. * Use with an #EZ402 or #402 mandrel (sold separately).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.49 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Felt Bob

NAKANISHI

[Features]
· High quality felt bob that works well with abrasives.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

AC Drum

AC Drum【1-10 Pieces Per Package】

ICHIGUCHI

[Features]
· Uses tube-shaped paper with a dedicated rubber holder.
· Available in abundant sizes, with smooth touch.
· Because it is made of rubber, there are no concerns about it carving into the workpiece.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spin Threaded Flap Wheel (Replaceable Shaft) Spin Shaft (Hex Shaft)

TRUSCO NAKAYAMA

Screw type shaft, with a single touch attaching and detaching. Enables replacing of the polishing units, while shaft is attached to the chuck of the power section. Shaft for spin screw flap wheel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Mounted Type New Soft Lap

Mounted Type New Soft Lap【14 Pieces Per Package】

UHT

An abrasive with abrasive grains kneaded into nonwoven fabric. There is no need to apply abrasive as there is with buffs. In addition, as the density is not as high as buffs, it supports high-speed rotation. Moreover, it is recommended for polishing workpieces without damaging them, such as in paint peeling and rust removal.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.34 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Unilon Wheel with Shaft (Hard)

YANASE

Ideal for removal of scratches and rust. Can also be used for hairline finishing.

[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.84 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Unilon Wheel with Shaft

YANASE

Prevents over-scraping, and produces a uniform finished surface with no clogging.

[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

"Felt Buff" (Shaft Diameter: 3 mm)

"Felt Buff" (Shaft Diameter: 3 mm)【10 Pieces Per Package】

NAKANISHI

[Features]
· Durability is significantly enhanced by the compression and high density of the high-quality wool (100%).
· Uniformly crimped wool greatly increases the permeability of the abrasive, achieving stable finishing.
[Applications]
· Various metals / non-ferrous metals / precious metals / ceramic / glass and other materials can be finished.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spin Threaded Stem Flap Wheel (Replaceable Shaft), SF-30/40/50/60

Spin Threaded Stem Flap Wheel (Replaceable Shaft), SF-30/40/50/60【5 Pieces Per Package】

TRUSCO NAKAYAMA

[Features]
- Allows one touch attachment / detachment with screw shaft.
- Can be replaced with the shaft still attached to the chuck.
- Optional spin shaft, can replace the shaft of the standard length (40 mm) and shaft for deep holes (100 mm) can be replaced.
[Applications]
- Rust removal, deburring, blazing.
- Polishing inside cylinders, around corners, etc.
- Tools can be used with: straight grinder (air / electric), electric drilling machines.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spin Threaded Stem Flap Wheel (Replaceable Shaft) SS-6040/SS-6100

TRUSCO NAKAYAMA

[Features]
- Allows one touch attachment / detachment with screw shaft.
- Enables polishing units to be replaced with the shaft still attached to the chuck of the moving part.
-
- Shaft standard length (SS-6040) (40mm), deep hole (SS-6100) (100mm) 2 times the item length.
[Applications]
- Spin screw shafted flap wheel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Drum (Shaft Diameter 6 mm) / Band

Drum (Shaft Diameter 6 mm) / Band【1-10 Pieces Per Package】

TRUSCO NAKAYAMA

[Features]
- Ideal for detailed polishing such as for burr removal.
[Applications]
- Tools for use: Micro grinder.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Felt Buffing, Excellent Holding Power of Abrasives Enables Effective Grinding

MINITOR

[Features]
· A high-quality, smooth buff made of wool compressed to high density.
· Excellent abrasive retention force enables effective polishing.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet, General Steel, Stainless Steel, Aluminum, Copper

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	46.59 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Felt Bob

NAKANISHI

[Features]
· Made from compressed, high-quality wool and for use in carefully finishing outer diameters during lathe turning.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	40.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flap Sander, Shaft Diameter ⌀3.0

NAKANISHI

[Features]
· A high efficiency sander that enables speed polishing with a radial polishing cloth that rotates at high speeds.
· The polishing cloth is spread by the rotational centrifugal force and is ideal for polishing the inner surface of a cylinder.
· Low rotation speed polishing provides a good surface finish for soft workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Polishing Tool: Micro Flap

MISUMI

Closely fits the shape of the work material.
Self-regenerating property means polishing with new abrasive surface at all times.
Low thermal transfer prevents distortion and chipping of the workpiece due to heat.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.40 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Polishing Tool: Flap with One-touch Screw-on Shaft for Polishing Irregular Surfaces

Polishing Tool: Flap with One-touch Screw-on Shaft for Polishing Irregular Surfaces【10 Pieces Per Package】

MISUMI

The abrasive paper on the flap expands due to centrifugal force when rotated, so it conforms to the shape of the workpiece and can also be used to polish the inside surface of the hole, and the flap and versatile rail are easily interchangeable.

Select to compare

Configure now
Min. Shipping Days ：	8 Days

Wheel Set with Felt Shaft, Shaft Diameter: 3 mm

Wheel Set with Felt Shaft, Shaft Diameter: 3 mm【12 Pieces Per Package】

MISUMI

[Features]
·A set of popular shapes and sizes of soft felt buffs

Select to compare

Configure now
Starting from^∗ ：	26.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Nylon Wheel

MISUMI

Since unilon fiber is specially coated with abrasive material, the intertwined unilon fiber plays the role of a cushion and prevents excessive shaving. It does not cause clogging and provides a constant finished surface until the end of product life. [C-Value]

Select to compare

Configure now
Starting from^∗ ：	12.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Skoo Light Wheel S

Skoo Light Wheel S【5 Pieces Per Package】

ICHIGUCHI

Suitable for work on both flat surfaces and irregularly shaped surfaces. S (standard item) uses only non-woven fabric.

[Features]
· Nonwoven fabric abrasive material has been processed into a wheel shape.
· Suitable for polishing surfaces, curves and interiors.
· Made of nonwoven fabric abrasive material only, for a light finish with a soft touch.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.23 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Flap Wheel

Flap Wheel【5 Pieces Per Package】

ICHIGUCHI

Uses a polishing cloth with alumina abrasive. Worn abrasive material is promptly ejected, enabling an even finish every time. As it has high adaptability to workpieces, it can be used anywhere, even flat, curved and irregular surfaces. Suitable for deburring, removing rust and removing scratches from iron and nonferrous metal as well as for grinding and polishing the inside and openings of pipes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Polyethylene Foil T

Polyethylene Foil T【10 Pieces Per Package】

ICHIGUCHI

The structure is layered to adapt to uneven surfaces. Available from 10 mm in diameter, which is ideal for detailed polishing. One laminated sheet is called 1P.

[Features]
· Utilizes a special nonwoven fabric abrasive material.
· It produces glossier finish as compared to the Sco-Light.
· The structure is layered to adapt to uneven surfaces.
· Poli Light Wheel T from 10 mm to 30 mm diameters are available, which are ideal for detailed polishing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	75.77 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Cup Disc

YANASE

A product which can polish both bottom and side surfaces at the same time.

[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and corners

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flap With Mugen Shaft

YANASE

[Features]
· Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
· Tough abrasive cloth is used to achieve both grinding power and durability.
· The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
· Deburring of metals and rust-removal.
· For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
· Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	6.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flap Wheels with Shaft

YANASE

High-quality standard products that come in a vast variety of sizes and grain sizes.

[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AC Band

AC Band【50 Pieces Per Package】

ICHIGUCHI

[Features]
· Uses tube-shaped paper with a dedicated rubber holder.
· Available in abundant sizes, with smooth touch.
· Performs the partial repair of molds and grinding/polishing of fine parts accurately without waste.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Cup Foil

Cup Foil【5 Pieces Per Package】

ICHIGUCHI

Makes working with the head surface of flap wheels possible. Grinding and polishing on the bottom of the L-shaped or concave parts, which was difficult with conventional wheels, can be performed efficiently. Uses an alumina abrasive to support all kinds of work.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	61.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cone Paper L / Z

Cone Paper L / Z【50 Pieces Per Package】

ICHIGUCHI

[Features]
· The size is long, so compared to conventional cone paper, the work efficiency has been improved.
· A soft, dedicated holder that is easy to hold and can be used to perform smooth polishing work.
· Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal.
· Extremely convenient when the work environment is not free.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	79.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SKO Light Foil M

SKO Light Foil M【5 Pieces Per Package】

ICHIGUCHI

Nonwoven fabric abrasive material has been processed into a wheel shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. M (mixed item) is a nonwoven fabric abrasive material mixed with polishing cloth. M (mixed item) has higher grinding power than S (standard item), and it is less likely to scorch. Also, the hairline pattern provided by moving the M type straight in one direction is very popular.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	60.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SKO Light Foil T

SKO Light Foil T【5-10 Pieces Per Package】

ICHIGUCHI

One laminated sheet is called 1P.

[Features]
· The structure is layered to adapt to uneven surfaces.
· Available from 10 mm in diameter, which is ideal for detailed polishing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.24 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Slit Wheel

Slit Wheel【5 Pieces Per Package】

ICHIGUCHI

The flap wheel vanes are cut to increase the outstanding ability to adapt to workpieces. In areas with overlapping steep curves, thread ridges, and multiple grooves, each and every workpiece is carefully polished. Suitable for grinding irregularly shaped pipes. Uses an alumina abrasive.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	62.03 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Cone Paper L/A

ICHIGUCHI

Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal. Extremely convenient when the work environment is not free.

[Features]
· The size is long, so compared to conventional cone paper, the work efficiency has been improved.
· Soft, dedicated holder that is easy to hold and can be used to perform smooth polishing work

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Polyethylene Foil

Polyethylene Foil【5 Pieces Per Package】

ICHIGUCHI

[Features]
· Special non-woven fabric abrasive material reduces deposition on the workpiece.
· Ideal for removing the nap of wood, scratch blurring on metal curved surfaces and in metal cylinders, glazing and polishing, adjusting the surface roughness before painting or laminating and removing scratches from metal.
· Poli Light Wheels from 30 mm to 100 mm in diameter are available

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	61.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Micro Flap

Micro Flap【10 Pieces Per Package】

ICHIGUCHI

[Features]
· A standard flexible polishing wheel with shaft (diameter 10 to 25 mm).
· The small flap wheel has been carefully crafted.
· No core run-out even under high-speed rotation, for smooth working of fine gaps.
· It is ideal for work such as detailed modification of machine parts, partial repair of molds, cleaning inner surface of small diameter pipes and deburring grooves.
· Uses an alumina abrasive.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.22 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Super Diamond Band

Super Diamond Band【5 Pieces Per Package】

ICHIGUCHI

[Features]
· Diamond product that can be used dry.
· Product commercialized by replacing polishing cloth with diamond sheet.
· Features excellent sharpness and a beautiful finish.
· Super Diamond (all-diamond): Boasts sharp grinding power and high durability

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	94.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Diamond Band

Diamond Band【10 Pieces Per Package】

ICHIGUCHI

The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. For waste-free polishing of detailed parts of difficult-to-cut materials

[Features]
· Diamond product that can be used dry.
· Made of resin bond diamond.
· Features a smooth touch.
· Use according to the application

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	46.98 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Diamond Micro Flap

ICHIGUCHI

The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. Suitable for work with materials that are difficult-to-cut or have irregular surfaces.

[Features]
· Diamond product that can be used dry.
· Made of resin bond diamond.
Features a smooth touch.
· Use according to the application

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.07 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Diamond Flap

ICHIGUCHI

Sharp cutting edge and diamond sheet abrasive with superb hardness are machined into a tip tool. Characteristics include strong grinding ability, excellent durability and a gentle touch. Allows for work as intended without chipping hard and brittle workpieces. Both a disc type and a flap type with shaft are available. Both wet and dry types can be used for the Super Diamond series.

[Features]
· Diamond product that can be used dry.
· Product commercialized by replacing polishing cloth with diamond sheet.
· Features excellent sharpness and a beautiful finish.
· Super Diamond (all-diamond): Boasts sharp grinding power and high durability

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cushioning Cone

YANASE

Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Cushioning Cone Holder

YANASE

Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.

[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.29 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single-Action Top with Shaft

YANASE

[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachment

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mini Flap Wheel

NEWREGISTON

Optimal for irregular shape polishing, with polishing of the front surfaces only without scraping the foundations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.36 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

"Flaps with Shaft" (No Metal Fittings, Shaft Diameter 3 mm)

MURAKO

[Features]
· The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
· Can be used for any type of polishing, including inner, curved and flat surfaces.
· Strong thermal dissipation effect ensuring minimal burning of workpieces.
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
· Fits the shape of the workpiece well.
[Applications]
· Grinding and polishing of iron and stainless steel.
· Pre-painting polishing.
· Scratch removal.
· Polishes the inside of pipes.
· For rust removal.
· Deburring.
· Surface polishing.
· Scorch removal after welding.
· Electric grinder, electric drill, drilling machine, etc.
· Tool used: straight grinder. (Air/Electric)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.57 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Flap With Shaft (Without Bracket, Shaft, Diameter 6 mm): Polishing

MURAKO

[Features]
· The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
· Can be used for any type of polishing, including inner, curved and flat surfaces.
· Strong thermal dissipation effect ensuring minimal burning of workpieces.
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
· Fits the shape of the workpiece well.
[Applications]
· Grinding and polishing of iron and stainless steel.
· Pre-painting polishing.
· Scratch removal.
· Polishes the inside of pipes.
· For rust removal.
· Deburring.
· Surface polishing.
· Scorch removal after welding.
· Tool used: straight grinder. (Air/Electric)
· Electric grinder, electric drill, drilling machine, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flap With Shaft (Without Metal Fittings, Shaft Diameter 6 mm) Used for Polishing Inner Surfaces, Curved Surfaces, Flat Surfaces, Etc.

MURAKO

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	6.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

"Slitted Felt Wheel with Shaft" (Shaft Diameter: 6 mm)

MURAKO

[Features]
· A felt flap type that greatly increases the efficiency of using grease abrasives (green rouge, etc.).
· It has excellent flexibility and can fit to the shape of the workpiece, realizing even polish and beautiful shine.
· Can be used for any type of finish polishing, including inner, curved and flat surfaces.
[Applications]
· For finishing and wiping.
· Add abrasive for mirror metal finish.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.34 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Application
Type
Material
Outer Diameter(mm)
Width(mm)
Shaft Diameter(mm)
Particle Size(#)
Stationary Diameter(mm)
Screw Hole Diameter(mm)

	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing
Brand	DREMEL	NAKANISHI	ICHIGUCHI	TRUSCO NAKAYAMA	UHT	YANASE	YANASE	NAKANISHI	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	MINITOR	NAKANISHI	NAKANISHI	MISUMI	MISUMI	MISUMI	MISUMI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	YANASE	YANASE	YANASE	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	ICHIGUCHI	YANASE	YANASE	YANASE	NEWREGISTON	MURAKO	MURAKO	MURAKO	MURAKO
Product Series	Buff for Finish Polishing	Felt Bob	AC Drum【1-10 Pieces Per Package】	Spin Threaded Flap Wheel (Replaceable Shaft) Spin Shaft (Hex Shaft)	Mounted Type New Soft Lap【14 Pieces Per Package】	Unilon Wheel with Shaft (Hard)	Unilon Wheel with Shaft	"Felt Buff" (Shaft Diameter: 3 mm)【10 Pieces Per Package】	Spin Threaded Stem Flap Wheel (Replaceable Shaft), SF-30/40/50/60【5 Pieces Per Package】	Spin Threaded Stem Flap Wheel (Replaceable Shaft) SS-6040/SS-6100	Drum (Shaft Diameter 6 mm) / Band【1-10 Pieces Per Package】	Felt Buffing, Excellent Holding Power of Abrasives Enables Effective Grinding	Felt Bob	Flap Sander, Shaft Diameter ⌀3.0	Polishing Tool: Micro Flap	Polishing Tool: Flap with One-touch Screw-on Shaft for Polishing Irregular Surfaces【10 Pieces Per Package】	Wheel Set with Felt Shaft, Shaft Diameter: 3 mm【12 Pieces Per Package】	Nylon Wheel	Skoo Light Wheel S【5 Pieces Per Package】	Flap Wheel【5 Pieces Per Package】	Polyethylene Foil T【10 Pieces Per Package】	Cup Disc	Flap With Mugen Shaft	Flap Wheels with Shaft	AC Band【50 Pieces Per Package】	Cup Foil【5 Pieces Per Package】	Cone Paper L / Z【50 Pieces Per Package】	SKO Light Foil M【5 Pieces Per Package】	SKO Light Foil T【5-10 Pieces Per Package】	Slit Wheel【5 Pieces Per Package】	Cone Paper L/A	Polyethylene Foil【5 Pieces Per Package】	Micro Flap【10 Pieces Per Package】	Super Diamond Band【5 Pieces Per Package】	Diamond Band【10 Pieces Per Package】	Diamond Micro Flap	Super Diamond Flap	Cushioning Cone	Cushioning Cone Holder	Single-Action Top with Shaft	Mini Flap Wheel	"Flaps with Shaft" (No Metal Fittings, Shaft Diameter 3 mm)	Flap With Shaft (Without Bracket, Shaft, Diameter 6 mm): Polishing	Flap With Shaft (Without Metal Fittings, Shaft Diameter 6 mm) Used for Polishing Inner Surfaces, Curved Surfaces, Flat Surfaces, Etc.	"Slitted Felt Wheel with Shaft" (Shaft Diameter: 6 mm)
Starting from^∗	17.49 € *Unit price with basic configuration Volume Discount	41.86 € *Unit price with basic configuration Volume Discount	19.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.28 € *Unit price with basic configuration Volume Discount	36.34 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.84 € *Unit price with basic configuration Volume Discount	14.95 € *Unit price with basic configuration Volume Discount	39.99 € *Unit price with basic configuration Volume Discount	39.81 € *Unit price with basic configuration Volume Discount	3.22 € *Unit price with basic configuration Volume Discount	9.21 € *Unit price with basic configuration Volume Discount	46.59 € *Unit price with basic configuration Volume Discount	40.01 € *Unit price with basic configuration Volume Discount	64.16 € *Unit price with basic configuration Volume Discount	33.40 € *Unit price with basic configuration Volume Discount	-	26.05 € *Unit price with basic configuration	12.45 € *Unit price with basic configuration	51.23 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	38.03 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	75.77 € *Unit price with basic configuration Volume Discount	15.36 € *Unit price with basic configuration Volume Discount	6.41 € *Unit price with basic configuration Volume Discount	7.36 € *Unit price with basic configuration Volume Discount	43.87 € *Unit price with basic configuration Volume Discount	61.14 € *Unit price with basic configuration Volume Discount	79.82 € *Unit price with basic configuration Volume Discount	60.46 € *Unit price with basic configuration Volume Discount	51.24 € *Unit price with basic configuration Volume Discount	62.03 € *Unit price with basic configuration Volume Discount	3.38 € *Unit price with basic configuration Volume Discount	61.45 € *Unit price with basic configuration Volume Discount	65.22 € *Unit price with basic configuration Volume Discount	94.30 € *Unit price with basic configuration Volume Discount	46.98 € *Unit price with basic configuration Volume Discount	21.07 € *Unit price with basic configuration Volume Discount	35.23 € *Unit price with basic configuration Volume Discount	1.60 € *Unit price with basic configuration Volume Discount	14.29 € *Unit price with basic configuration Volume Discount	3.42 € *Unit price with basic configuration Volume Discount	18.36 € *Unit price with basic configuration Volume Discount	5.57 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.29 € *Unit price with basic configuration Volume Discount	16.34 € Special price *Unit price with basic configuration Promotional pricing Volume Discount
Min. Shipping Days	6 Days	6 Days	Same day	6 Days	Same day	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	7 Days	8 Days	5 Days	5 Days	Same day	Same day	5 Days	5 Days	6 Days	5 Days	5 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	7 Days	6 Days	6 Days	5 Days	8 Days	6 Days	12 Days	Same day	Same day	6 Days	Same day
Application	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing
Type	-	-	Band	Flap with shaft	-	Flap with shaft	Flap with shaft	Drum	Flap with shaft	Flap with shaft	Band / Holder (Drum)	-	-	Flap with shaft	Flap with shaft	Flap with shaft	-	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Band	Flap with shaft	Paper	Flap with shaft	Flap with shaft	Flap with shaft	Paper	Flap with shaft	Flap with shaft	Band	Band	Flap with shaft	Flap with shaft	Paper	Holder	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft
Material	-	Buff	-	-	-	-	-	Buff	-	-	-	Buff	Buff	-	-	-	Felt	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Felt
Outer Diameter(mm)	23.8	6 ～ 30	3 ～ 75	-	-	10 ～ 25	50 ～ 100	4 ～ 22	30 ～ 60	-	22.1 ～ 30.1	6 ～ 30	4 ～ 22	⌀10 ～ ⌀30	15	10 ～ 50	6,8,10,12	50	30 ～ 100	25 ～ 100	10 ～ 30	10 ～ 25	25 ～ 50	10 ～ 30	-	30 ～ 60	-	30 ～ 100	10 ～ 80	40 ～ 50	-	30 ～ 100	10 ～ 25	-	-	10 ～ 20	15 ～ 30	-	Tip diameter ø14; Large end diameter φ20	10 ～ 25	80	25 ～ 30	50 ～ 80	25 ～ 40	20 ～ 50
Width(mm)	-	5 ～ 30	10 ～ 30	-	-	13 ～ 25	25	5 ～ 20	25	-	20 ～ 30	10 ～ 35	5 ～ 20	5 ～ 20	10	5 ～ 25	15,18,20	25	25	5 ～ 30	-	20 ～ 25	25	10	10 ～ 30	25 ～ 40	40 ～ 50	25	-	25	40 ～ 60	25	5 ～ 20	10	10 ～ 20	10	10	-	50	10 ～ 25	25	5	5 ～ 25	20 ～ 25	20
Shaft Diameter(mm)	3.2	3 ～ 6	3 ～ 6	6.35	3	3 ～ 6	6	3	-	6	6	3 ～ 6	2.34 ～ 3	⌀3.0	3	-	3	6	6	3 ～ 6	3	3 ～ 6	6	3	-	6	-	6	3 ～ 6	6	-	6	3	-	-	3	3	-	6	-	6	3	6	6	6
Particle Size(#)	320	-	-	-	120 ～ 1500	600 ～ 1500	120 ～ 600	-	40 ～ 400	-	40 ～ 600	-	-	150 ～ 600	400	60 ～ 120	-	320	60 ～ 400	40 ～ 600	60 ～ 1000	60 ～ 100	60 ～ 240	80 ～ 180	40 ～ 600	60 ～ 600	60 ～ 120	60 ～ 400	60 ～ 400	80 ～ 600	100 ～ 240	60 ～ 1000	60 ～ 600	400	200 ～ 1000	200 ～ 400	800 ～ 3000	80 ～ 150	-	60 ～ 240	80	40 ～ 400	40 ～ 400	40 ～ 400	-
Stationary Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Screw Hole Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	M3 ～ M6	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	3 ～ 6	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Application
- Polishing
- Polishing
Clear

Type
- Flap with shaft
- Band
- Drum
- Paper
- Holder
- Holder (Drum)
Clear

Material
- Cotton
- Sisal
- Flannel
- Buff
- Felt
Clear

Outer Diameter(mm)
2.1

3

4

5

6

⌀6

6,8,10,12

6.1

7

8

⌀8

8–13

8.1

9

9.5

10

⌀10

11

12

⌀12

12.1

12.7

13

⌀13

14

⌀14

Tip diameter ø14; Large end diameter φ20

15

⌀15

15.1

17

⌀17

19

19.1

20

⌀20

21

⌀21

22

⌀22

22.1

23

23.8

25

⌀25

25.1

25.4

28

30

⌀30

30.1

32

38

40

⌀40

45

50

⌀50

60

75

80

100

125
Clear

Width(mm)
1.5

2

3

3.5

4

5

05

6

7

8

9

10

11

12

13

14

15

15,18,20

16

17

18

19

20

21

22

23

24

25

26

27

30

32

35

40

45

50

60

150
Clear

Shaft Diameter(mm)
1.3

⌀1.3

2.34

⌀2.34

3

⌀3.0

3.2

6

⌀6.0

6.3

6.35

10

13
Clear

Particle Size(#)
10,000

36

40

60

80

80、120、220

100

100/240/400/800/1500/3000

120

150

180

200

240

240 equivalent

320

400

600

800

1000

1500

3000

Hard

Soft

Super hard
Clear