CONCAR V Belt

?* Information on days to ship and prices

• 

  V-Ribbed Belt - Profile PJ

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Polyester
  ・Height(mm): 3.5
  ・Rib spacing(mm): 2.34
  ・DIN 7868
  ・On the running side according to ISO 1814

  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPB

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 16.3
  ・Height(mm): 13
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	17.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPA / AVX 13

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 12.7
  ・Height(mm): 10
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Starting from∗ ：	8.08 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PK

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Polyester
  ・Height(mm): 5.5
  ・Rib spacing(mm): 3.56
  ・DIN 7867
  ・On the running side according to ISO 3579

  Starting from∗ ：	10.94 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Belt - Profile 28 x 8

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 28
  ・Height(mm): 8
  ・Angle(°): 25
  ・Standard: DIN 7719 / ISO 1604
  
  ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

  Starting from∗ ：	35.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPZ / AVX 10

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 9.7
  ・Height(mm): 8
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Starting from∗ ：	5.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Power Twist Plus

  CONCAR

  [Specifications]
  ・Type: without metal rivets
  ・Material: Polyurethane with fabric inserts
  ・Colour: Red
  ・Roll length(m): 10 or 2 (short length)
  
  Link belts are the ideal solution for areas of use under difficult conditions. Power Twist Plus (red), Nu-T-Link (orange) and Super-T-Link (blue) are available in rolls by length; the surcharge for cutting to length is 10 %. In some cases, short lengths are also available.

  Starting from∗ ：	52.94 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PH

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 3
  ・Rib spacing(mm): 1.6
  ・Standard: DIN 7867

  Starting from∗ ：	15.34 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PL

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 7
  ・Rib spacing(mm): 4.7
  ・Standard: DIN 7867
  
  ConCar PolyRib ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Starting from∗ ：	33.17 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile JPU

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Height(mm): 3.5
  ・Rib spacing(mm): 2.34
  
  Ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile SPB

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 15.6
  ・Rib spacing(mm): 19
  ・Standard: DIN 7753
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Starting from∗ ：	151.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 10 / Z

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 10
  ・Height(mm): 6
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	6.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile X13 / AX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 8
  ・Standard: DIN 2215
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Starting from∗ ：	8.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  PU V-Belt - VL

  CONCAR

  [Specifications]
  ・Type: not serrated
  ・Material: Polyurethane
  ・Shore hardness(°): 80 Shore A
  ・Colour: Brown
  
  With its large selection of PU V-belts, ConCar offers solution options for all sectors for your conveyance and transport applications. PU V-belts are available in many different profiles, hardness degrees (colours), with and without tension members, and are largely FDA / USDA approved. The range is rounded off by corresponding welding tools, with which you can easily weld these belts. The tools are also available individually.
  ・PU V-Belt - VL

  Min. Shipping Days ：	3 Days

• 

  Twin V-Belt - Profile AA

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 10
  ・Standard: DIN 7722
  
  ConCar Double V-belts are used mainly with agricultural machinery. Due to the edge angles on both sides, several pulleys can be driven in the counter-direction in one drive system. The reference lengths given correspond to the average length.

  Starting from∗ ：	35.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PM

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 13
  ・Rib spacing(mm): 9.4
  ・Standard: DIN 7867
  
  ConCar PolyRib ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Starting from∗ ：	120.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 5MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 5
  ・Height(mm): 3
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 5MS, Composite Belt

  Starting from∗ ：	49.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPA / AV 13

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 12.7
  ・Height(mm): 10
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	7.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPB / 5VX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 16.3
  ・Height(mm): 13
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Starting from∗ ：	19.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile 8V / 25J

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 25.5
  ・Rib spacing(mm): 28.6
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Starting from∗ ：	482.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 17 / B

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 17
  ・Height(mm): 11
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	8.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 8

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 8
  ・Height(mm): 5
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	6.79 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  PU V-Belt - VLW

  CONCAR

  [Specifications]
  ・Type: not serrated
  ・Material: Polyurethane
  ・Shore hardness(°): 80 Shore A
  ・Colour: Blue
  
  With its large selection of PU V-belts, ConCar offers solution options for all sectors for your conveyance and transport applications. PU V-belts are available in many different profiles, hardness degrees (colours), with and without tension members, and are largely FDA / USDA approved. The range is rounded off by corresponding welding tools, with which you can easily weld these belts. The tools are also available individually.
  ・PU V-Belt - VLW

  Min. Shipping Days ：	3 Days

• 

  V-Belt - Profile 47 x 13

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 47
  ・Height(mm): 13
  ・Angle(°): 28
  ・Standard: DIN 7719 / ISO 1604
  
  ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

  Starting from∗ ：	79.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile TB2

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Height(mm): 2.2
  ・Rib spacing(mm): 2
  
  Ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Starting from∗ ：	7.07 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11M, Single Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11M, Single Belt

  Starting from∗ ：	55.46 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11MS, Composite Belt

  Starting from∗ ：	113.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 7MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 7
  ・Height(mm): 5
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 5MS, Composite Belt
  ・Wide Belt - Profile 7MS, Composite Belt

  Starting from∗ ：	70.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile 3V

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 9
  ・Height(mm): 8
  ・Standard: USA Standard RMA/MPTA
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	6.12 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile 5V

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 15
  ・Height(mm): 13
  ・Standard: USA Standard RMA/MPTA
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	17.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile 8V

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 25
  ・Height(mm): 23
  ・Standard: USA Standard RMA/MPTA
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	84.34 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPC

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 22
  ・Height(mm): 18
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	44.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPZ / AV 10

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 9.7
  ・Height(mm): 8
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	5.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPC

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 22
  ・Height(mm): 18
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Starting from∗ ：	52.84 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile 3V / 9J

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 9.9
  ・Rib spacing(mm): 10.3
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Starting from∗ ：	42.86 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile 5V / 15J

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 15.1
  ・Rib spacing(mm): 17.5
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Starting from∗ ：	99.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile SPA

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 12.5
  ・Rib spacing(mm): 14.5
  ・Standard: DIN 7753
  
  ConCar Power Belt - Profile SPA

  Starting from∗ ：	48.42 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile SPC

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 22.6
  ・Rib spacing(mm): 25.5
  ・Standard: DIN 7753
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Starting from∗ ：	303.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 13 / A

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 8
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	7.04 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 20

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Width(mm): 20
  ・Height(mm): 12.5
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	15.17 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 22 / C

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 22
  ・Height(mm): 14
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	17.03 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 25

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 25
  ・Height(mm): 16
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	25.09 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 32 / D

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 32
  ・Height(mm): 20
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	69.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 5

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 5
  ・Height(mm): 3
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	6.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 6

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 6
  ・Height(mm): 4
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Starting from∗ ：	8.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...