MAEDLER Bearing Units（Unit, Type：Bearing Unit）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Ball Flange Bearings SSKFL, Light Series
MAEDLER
Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 15.58 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Pillow Block Bearing Units EK, for Fixed Side, Black Oxided
MAEDLER
Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals.
Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for support side: Pillow Block Bearing EF.- Volume Discount
Starting from∗ ： 87.60 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Pillow Block Bearing Units EF, for Support Side, Black Oxided
MAEDLER
Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 2 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Pillow Block Bearing EK.- Volume Discount
Starting from∗ ： 34.11 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Pillow Block Bearing Units EK, for Fixed Side, Nickel-plated
MAEDLER
Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals.
Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for support side: Pillow Block Bearing EF.- Volume Discount
Starting from∗ ： 100.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Cap Bearings DIN 505 Version L, with Red Brass Bush
MAEDLER
Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (CuSn7Zn4Pb7-C).
Bore Tolerance: ISO D10.- Volume Discount
Starting from∗ ： 214.31 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings UCF (Grey Cast Iron)
MAEDLER
Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.- Volume Discount
Starting from∗ ： 12.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, Black
MAEDLER
Material: Housing: Thermoplast PBT, black.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rollingbearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).
* Not recommended for axial force.- Volume Discount
Starting from∗ ： 23.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings SSBPFL, Two-Part Steel Sheet, Stainless Steel
MAEDLER
Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions.
Re-lubricating is not possible.- Volume Discount
Starting from∗ ： 24.89 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings UCFL (Grey Cast Iron)
MAEDLER
Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.- Volume Discount
Starting from∗ ： 10.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings UCP (Grey Cast Iron)
MAEDLER
Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.- Volume Discount
Starting from∗ ： 17.83 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings UCFC (Grey Cast Iron)
MAEDLER
Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
With centring spigot.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.- Volume Discount
Starting from∗ ： 13.54 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings SSUCPA, Stainless Steel
MAEDLER
Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
* Maximum radial load if axial force = 0.
The axial load rating is approx. 20% of the radial load rating.- Volume Discount
Starting from∗ ： 43.13 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Flange Bearing Units FF, for Support Side, Black Oxided
MAEDLER
Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 4 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Flange Bearing FK.- Volume Discount
Starting from∗ ： 24.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings BPF (Two-Part Steel Sheet, Zinc-plated)
MAEDLER
Material: Housing from two-part steel sheets, zinc-plated.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.- Volume Discount
Starting from∗ ： 13.89 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings BPFL (Two-Part Steel Sheet, Zinc-Plated)
MAEDLER
Material: Housing from two-part steel sheets, zinc-plated.
Rolling bearing from bearing steel.
With 2 mounting holes.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.- Volume Discount
Starting from∗ ： 14.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings BPP (Two-Part Steel Sheet, Zinc-Plated)
MAEDLER
Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.- Volume Discount
Starting from∗ ： 14.00 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Flange Bearings DIN 502 Version A, with Red Brass Bush
MAEDLER
Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (G-CuSn7ZnPb).
Bore Tolerance: ISO D10.- Volume Discount
Starting from∗ ： 210.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Flange Bearings DIN 502 Version B, without Bush
MAEDLER
Material: Grey Cast Iron GG25 (GJL-250).
Bore Tolerance: ISO D7.- Volume Discount
Starting from∗ ： 78.42 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Flange Bearings DIN 503 Version A, with Red Brass Bush
MAEDLER
Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (G-CuSn7ZnPb).
Bore Tolerance: ISO D10.- Volume Discount
Starting from∗ ： 192.27 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Heavy-Duty Pillow Block Bearings DIN 504 Version A, with Red Brass Bush
MAEDLER
Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (G-CuSn7ZnPb).
Bore Tolerance: ISO D10.- Volume Discount
Starting from∗ ： 136.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Heavy-Duty Pillow Block Bearings DIN 504 Version B, without Bush
MAEDLER
Material: Grey Cast Iron GG25 (GJL-250).
Bore Tolerance: ISO D7.- Volume Discount
Starting from∗ ： 49.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, White
MAEDLER
Material: Housing: Thermoplast PBT, white.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).
* Not recommended for axial force.- Volume Discount
Starting from∗ ： 24.80 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, White
MAEDLER
Material: Housing: Thermoplast PBT, white.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).
* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.- Volume Discount
Starting from∗ ： 27.27 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, Black
MAEDLER
Material: Housing: Thermoplast PBT, black.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).
* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.- Volume Discount
Starting from∗ ： 25.58 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings SSUFL, Light Series, with Eccentric Ring
MAEDLER
Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 15.63 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings SSUCFL, Stainless Steel
MAEDLER
Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304).Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.- Volume Discount
Starting from∗ ： 34.44 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings SSUCF, Stainless Steel
MAEDLER
Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.- Volume Discount
Starting from∗ ： 41.63 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings SSBPF, Two-Part Steel Sheet, Stainless Steel
MAEDLER
Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions.
Re-lubricating is not possible.- Volume Discount
Starting from∗ ： 26.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings KFL, Light Series
MAEDLER
Material: Housing: from Zinc die cast,
Rolling bearing: from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 4.63 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings UFL, Light Series, with Eccentric Ring
MAEDLER
Material: Housing: from Zinc die cast,
Rolling bearing: from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 5.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Flange Bearings UCFA (Grey Cast Iron)
MAEDLER
Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
With 2 mounting holes, one of them slotted.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.- Volume Discount
Starting from∗ ： 16.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings SSKP, Light Series
MAEDLER
Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 31.21 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings SSBPP, Two-Part Sheet, Stainless Steel
MAEDLER
Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304).
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.- Volume Discount
Starting from∗ ： 26.97 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Light-Duty Pillow Block Bearings HM
MAEDLER
Material: Grey Cast Iron GG25 (GJL-250).
Bore tolerance: ISO D9.
With Bore for Drive-In Oiler.- Volume Discount
Starting from∗ ： 36.77 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings KP, Light Series
MAEDLER
Material: Housing: from Zinc die cast,
Rolling Bearing: from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 8.51 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings UP, Light Series, with Eccentric Ring
MAEDLER
Material: Housing: from Zinc die cast,
Rolling bearing: from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 6.64 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings UCPA
MAEDLER
Material: Housing from grey cast iron.
Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with grease nipple.- Volume Discount
Starting from∗ ： 17.17 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, White
MAEDLER
Material: Housing: Thermoplast PBT, white.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).
* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.- Volume Discount
Starting from∗ ： 26.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, Black
MAEDLER
Material: Housing: Thermoplast PBT, black.
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.
Temperature range: -20°C to +90°C (for short time up to +120°C).
* Maximum radial load if axial force = 0.
** Maximum axial load if radial force = 0.- Volume Discount
Starting from∗ ： 25.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings SSUP, Light Series, with Eccentric Ring
MAEDLER
Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.- Volume Discount
Starting from∗ ： 20.76 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pillow Block Bearings SSUCP, Stainless Steel
MAEDLER
Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
Delivery with stainless steel grease nipple.- Volume Discount
Starting from∗ ： 48.37 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Flange Bearing Units FK, for Fixed Side, Nickel-plated
MAEDLER
Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 4 mounting holes.
Types FK06 and FK08 sealed only on the cylindrical side. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for support side: Flange Bearing FF.- Volume Discount
Starting from∗ ： 86.09 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Flange Bearing Units FK, for Fixed Side, Black Oxided
MAEDLER
Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 4 mounting holes.
Types FK06 and FK08 sealed only on the cylindrical side. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for support side: Flange Bearing FF.- Volume Discount
Starting from∗ ： 77.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Flange Bearing Units FF, for Support Side, Nickel-plated
MAEDLER
Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 4 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Flange Bearing FK.- Volume Discount
Starting from∗ ： 28.23 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Pillow Block Bearing Units BK, for Fixed Side, Black Oxided
MAEDLER
Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes.
Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF.- Volume Discount
Starting from∗ ： 87.40 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Unit, Type |
| Bearing Unit, Type |
| Shaft Bore Dia. d(mm) |
| Unit Body Material |
| Bearing Inner Dia. Shape |
| Pillow Type, Category |
| Rolling Element Material |
| Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Pillow Block Bearing Units EF, for Support Side, Black Oxided | Pillow Block Bearing Units EK, for Fixed Side, Nickel-plated | Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, Black | Ball Flange Bearings SSBPFL, Two-Part Steel Sheet, Stainless Steel | Ball Flange Bearings BPF (Two-Part Steel Sheet, Zinc-plated) | Ball Flange Bearings BPFL (Two-Part Steel Sheet, Zinc-Plated) | Ball Pillow Block Bearings BPP (Two-Part Steel Sheet, Zinc-Plated) | Heavy-Duty Pillow Block Bearings DIN 504 Version A, with Red Brass Bush | Heavy-Duty Pillow Block Bearings DIN 504 Version B, without Bush | Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, White | Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, White | Ball Flange Bearings TUCF, Thermoplastic Housing with Stainless Steel Bearing, Black | Ball Flange Bearings SSUFL, Light Series, with Eccentric Ring | Ball Flange Bearings SSBPF, Two-Part Steel Sheet, Stainless Steel | Ball Pillow Block Bearings SSBPP, Two-Part Sheet, Stainless Steel | Ball Pillow Block Bearings UP, Light Series, with Eccentric Ring | Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, White | Ball Pillow Block Bearings TUCP, Thermoplastic Housing with Stainless Steel Bearing, Black | Ball Pillow Block Bearings SSUP, Light Series, with Eccentric Ring | ||||||||||||||||||||||||||
| Starting from∗ | 15.58 € *Unit price with basic configuration Volume Discount | 87.60 € *Unit price with basic configuration Volume Discount | 34.11 € *Unit price with basic configuration Volume Discount | 100.22 € *Unit price with basic configuration Volume Discount | 214.31 € *Unit price with basic configuration Volume Discount | 12.33 € *Unit price with basic configuration Volume Discount | 23.73 € *Unit price with basic configuration Volume Discount | 24.89 € *Unit price with basic configuration Volume Discount | 10.22 € *Unit price with basic configuration Volume Discount | 17.83 € *Unit price with basic configuration Volume Discount | 13.54 € *Unit price with basic configuration Volume Discount | 43.13 € *Unit price with basic configuration Volume Discount | 24.62 € *Unit price with basic configuration Volume Discount | 13.89 € *Unit price with basic configuration Volume Discount | 14.08 € *Unit price with basic configuration Volume Discount | 14.00 € *Unit price with basic configuration Volume Discount | 210.91 € *Unit price with basic configuration Volume Discount | 78.42 € *Unit price with basic configuration Volume Discount | 192.27 € *Unit price with basic configuration Volume Discount | 136.84 € *Unit price with basic configuration Volume Discount | 49.92 € *Unit price with basic configuration Volume Discount | 24.80 € *Unit price with basic configuration Volume Discount | 27.27 € *Unit price with basic configuration Volume Discount | 25.58 € *Unit price with basic configuration Volume Discount | 15.63 € *Unit price with basic configuration Volume Discount | 34.44 € *Unit price with basic configuration Volume Discount | 41.63 € *Unit price with basic configuration Volume Discount | 26.78 € *Unit price with basic configuration Volume Discount | 4.63 € *Unit price with basic configuration Volume Discount | 5.43 € *Unit price with basic configuration Volume Discount | 16.66 € *Unit price with basic configuration Volume Discount | 31.21 € *Unit price with basic configuration Volume Discount | 26.97 € *Unit price with basic configuration Volume Discount | 36.77 € *Unit price with basic configuration Volume Discount | 8.51 € *Unit price with basic configuration Volume Discount | 6.64 € *Unit price with basic configuration Volume Discount | 17.17 € *Unit price with basic configuration Volume Discount | 26.91 € *Unit price with basic configuration Volume Discount | 25.53 € *Unit price with basic configuration Volume Discount | 20.76 € *Unit price with basic configuration Volume Discount | 48.37 € *Unit price with basic configuration Volume Discount | 86.09 € *Unit price with basic configuration Volume Discount | 77.22 € *Unit price with basic configuration Volume Discount | 28.23 € *Unit price with basic configuration Volume Discount | 87.40 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Unit, Type | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit |
| Bearing Unit, Type | Others | Pillow Type | Pillow Type | Pillow Type | Others | Others | Others | Others | Others | Pillow Type | Others | Pillow Type | Others | Others | Others | Pillow Type | Others | Others | Others | Pillow Type | Pillow Type | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Others | Others | Others | Pillow Type |
| Shaft Bore Dia. d(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Unit Body Material | Stainless Steel | Steel | Steel | Steel | Others | Others | Others | Stainless Steel | Others | Others | Others | Stainless Steel | Steel | Steel | Steel | Steel | Others | Others | Others | Others | Others | Others | Others | Others | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Others | Others | Others | Stainless Steel | Stainless Steel | Others | Others | Others | Others | Others | Others | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel |
| Bearing Inner Dia. Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pillow Type, Category | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Rolling Element Material | Stainless Steel | - | - | - | - | Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Stainless Steel | - | Steel | Steel | Steel | - | - | - | - | - | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | - | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Unit, Type
-
Bearing Unit -
Plummer Block -
Framed Bearing Unit -
Others
-
-
Bearing Unit, Type
-
Pillow Type -
Square Flange Type -
Round Flange Type -
Diamond-Shaped Flange Type -
Take-Up Type -
Deformed Diamond-Shaped Flange Type -
Others
-
-
Shaft Bore Dia. d(mm)
- 1-1/4
- 6
- 8
- 10
- 12
- 12.7
- 15
- 15.875
- 16
- 17
- 19.05
- 19.05 - 30
- 20
- 22.225
- 22.225 - 35
- 23.812
- 23.813
- 25
- 25.4
- 28.575
- 28.575 - 40
- 30
- 30.162
- 30.163
- 31.75
- 31.75 - 50
- 33.34
- 34.925
- 34.93
- 35
- 36.512
- 36.513
- 36.513 - 45
- 36.513 - 55
- 38.1
- 40
- 41.275
- 41.275 - 60
- 42.862
- 44.45
- 45
- 47.625
- 47.625 - 65
- 49.213
- 50
- 50.8
- 53.975 - 75
- 55
- 55.562
- 55.563
- 55.563 - 80
- 57.15
- 60
- 61.913
- 61.913 - 90
- 63.5
- 65
- 68.262
- 68.263
- 70
- 74.613
- 74.613 - 85
- 74.613 - 100
- 74.6131
- 75
- 79.375 - 90
- 80
- 82.55
- 85
- 87.313
- 87.313 - 120
- 90
- 95
- 100
- 105
- 110
- 114.3
- 115
- 120
- 125
- 130
- 131.763
- 138.113
- 140
- 160
-
Unit Body Material
- Cast Iron
- Stainless Steel
- Steel Plate
- Structural Steel
- Resin
- Others
- Steel
-
Bearing Inner Dia. Shape
-
Pillow Type, Category
-
Rolling Element Material
-
Surface Treatment
Narrow search by specifying Brand
-
- MISUMI (13)
- MAEDLER (49)
- NIPPON PILLOW BLOCK (36)
- ASAHI SEIKO (26)
- NTN (25)
- FSBEARING (11)
- SKF (3)
- ZEN (1)
- INA (1)
- KMT BEARINGS (0)
- TOHO (0)
- SANWA CONVEYOR (0)
- SNR (0)
- NORELEM (0)
- NKE BEARINGS (0)
- TIMKEN (0)
- FAG (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Bearing Units
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.