MAEDLER Washers / lock washers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Spherical Washer-and-Seat Combinations, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Spherical washer and conical seat are undetachable connected. The total height h is larger than parts according to the old standard DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required.- Volume Discount
Starting from∗ ： 5.95 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spherical Washer-and-Seat Combinations, Standard
MAEDLER
Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.
Spherical washer and conical seat are undetachable connected. The total height h is larger than parts according to the old standard DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required.- Volume Discount
Starting from∗ ： 4.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spherical Washers According to the Old Standard DIN 6319, Stainless Steel 1.4401, Type C
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 2.09 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4301, Type D
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 1.74 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4301, Type G
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 1.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4401, Type D
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 2.09 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4401, Type G
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 2.31 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical Seats According to the Old Standard DIN 6319, Steel, Phosphated and Oiled, Type D
MAEDLER
Material: Steel, bright turned, case hardened, hardening depth min. 0.2 mm.Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 0.72 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical Seats According to the Old Standard DIN 6319, Steel, Phosphated and Oiled, Type G
MAEDLER
Material: Tempered steel, phosphated and oiled.Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 0.80 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Conical Seats According to the Old Standard DIN 6319, Steel, with Blue PTFE Coating, Type D
MAEDLER
Material: Steel, bright turned, case hardened, hardening depth min. 0.2 mm. With blue PTFE coating.The very low friction enables precise adjusting at high wear resistance.
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 0.90 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spherical Washers According to the Old Standard DIN 6319, Stainless Steel 1.4301, Type C
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 1.74 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spherical Washers According to the Old Standard DIN 6319, Steel, Phosphated and Oiled, Type C
MAEDLER
Material: Steel, bright turned, case hardened, hardening depth min. 0.2 mm.Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 0.72 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spherical Washers According to the Old Standard DIN 6319, Steel, with Blue PTFE Coating, Type C
MAEDLER
Material: Steel, bright turned, case hardened, hardening depth min. 0.2 mm. With blue PTFE coating.The very low friction enables precise adjusting at high wear resistance.
Spherical washers according to the old standard DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.- Volume Discount
Starting from∗ ： 0.90 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type (Application) |
| Type |
| Material |
| Surface Treatment |
| I.D. d(mm) |
| Screw Nominal (M) |
| I.D. d(inch) |
| Screw Nominal (inch) |
| Thickness T(mm) |
| Sales Unit |
| Material: Steel |
| Thickness t(inch) |
| Material: Stainless Steel |
| Surface Treatment (Detailed) |
| Type, Spring Washers |
| Type, Toothed Washer |
| Outer Diameter D(inch) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Spherical Washers According to the Old Standard DIN 6319, Stainless Steel 1.4401, Type C | Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4301, Type D | Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4301, Type G | Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4401, Type D | Conical Seats According to the Old Standard DIN 6319, Stainless Steel 1.4401, Type G | Conical Seats According to the Old Standard DIN 6319, Steel, Phosphated and Oiled, Type D | Conical Seats According to the Old Standard DIN 6319, Steel, Phosphated and Oiled, Type G | Conical Seats According to the Old Standard DIN 6319, Steel, with Blue PTFE Coating, Type D | Spherical Washers According to the Old Standard DIN 6319, Stainless Steel 1.4301, Type C | Spherical Washers According to the Old Standard DIN 6319, Steel, Phosphated and Oiled, Type C | Spherical Washers According to the Old Standard DIN 6319, Steel, with Blue PTFE Coating, Type C | ||
| Starting from∗ | 5.95 € *Unit price with basic configuration Volume Discount | 4.66 € *Unit price with basic configuration Volume Discount | 2.09 € *Unit price with basic configuration Volume Discount | 1.74 € *Unit price with basic configuration Volume Discount | 1.93 € *Unit price with basic configuration Volume Discount | 2.09 € *Unit price with basic configuration Volume Discount | 2.31 € *Unit price with basic configuration Volume Discount | 0.72 € *Unit price with basic configuration Volume Discount | 0.80 € *Unit price with basic configuration Volume Discount | 0.90 € *Unit price with basic configuration Volume Discount | 1.74 € *Unit price with basic configuration Volume Discount | 0.72 € *Unit price with basic configuration Volume Discount | 0.90 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type (Application) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Spherical Washers | Spherical Washers | Spherical Washers | - | - | - | - | - | - | - | Spherical Washers | Spherical Washers | Spherical Washers |
| Material | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Stainless Steel | Steel | Steel |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. d(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Nominal (M) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D. d(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Nominal (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thickness T(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sales Unit | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material: Steel | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thickness t(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material: Stainless Steel | EN 1.4301 Equiv. | - | EN 1.4301 Equiv. ～ EN 1.4401 Equiv. | EN 1.4301 Equiv. | EN 1.4301 Equiv. | EN 1.4301 Equiv. ～ EN 1.4401 Equiv. | EN 1.4401 Equiv. | - | - | - | EN 1.4301 Equiv. | - | - |
| Surface Treatment (Detailed) | Not Provided | Other Special Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Other Special Treatment | Other Special Treatment | Not Provided | Not Provided | Other Special Treatment |
| Type, Spring Washers | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type, Toothed Washer | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Diameter D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Type (Application)
- Plain Washers
- Spring Washers
- Special Shape
- Locking
- For Fluid
-
Type
-
Plain Washers
-
Spring Washers
-
Toothed Washers (Toothed Lock Washers)
-
Rosette Washers
-
Single/Double Tab Washers
-
Nord-lock Washers
-
Set Washers
-
Tapered Washers
-
Spherical Washers
-
Ornamental Screws, Ornamental Washers
-
Hooked Washers for Jig
-
Split Washers for Jig
-
Square Washers
-
Flat Washers with Cover
-
Seal Washers
-
Pawl Washers
-
For Corrugated Sheet
-
Fall Prevention and loosening Prevention Spring
-
Plain Washers
-
Material
- Steel
- Stainless Steel
- Resin
- Titanium Class 2
- Aluminum
- Brass
- Copper
- Ceramics
- Phosphor Bronze
- Titanium Class 1
- Nickel Base Alloy
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plated
- Trivalent Chromate
- Bright Chrome Plating
- Zinc Plating
- Chromate Plating
- Nickel Plating
- Chrome Plating
- Parker
- Clear Anodize
- Dacrotized
- Polishing
- Painting, Coating
- Silver/Copper/Tin Plating
- Temper Color
- Passivated
-
I.D. d(mm)
- 0
- 0.114
- 0.125
- 0.141
- 0.156
- 0.167
- 0.172
- 0.193
- 0.203
- 0.252
- 0.281
- 0.314
- 0.344
- 0.377
- 0.391
- 1
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3.1
- 3.15
- 3.2
- 3.3
- 3.4
- 3.5
- 3.55
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4.1
- 4.2
- 4.25
- 4.3
- 4.4
- 4.5
- 4.7
- 4.8
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.36
- 5.4
- 5.45
- 5.5
- 5.8
- 6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.1
- 7.2
- 7.4
- 7.5
- 7.8
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.6
- 9.8
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.8
- 12
- 12.1
- 12.2
- 12.5
- 12.6
- 12.7
- 13
- 13.2
- 13.3
- 13.5
- 13.8
- 14
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 15
- 15.2
- 15.5
- 15.8
- 15.9
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.9
- 17
- 17.5
- 17.7
- 17.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.7
- 18.8
- 18.9
- 19
- 19.5
- 19.6
- 19.7
- 19.8
- 20
- 20.1
- 20.2
- 20.5
- 20.7
- 20.9
- 21
- 21.4
- 21.5
- 21.75
- 22
- 22.1
- 22.5
- 22.9
- 23
- 23.2
- 23.4
- 23.5
- 23.75
- 24
- 24.5
- 24.75
- 25
- 25.2
- 25.3
- 25.4
- 25.5
- 26
- 26.1
- 26.4
- 26.6
- 26.75
- 27
- 27.5
- 27.75
- 28
- 28.2
- 28.4
- 28.5
- 29
- 29.3
- 29.75
- 29.8
- 30
- 30.1
- 30.4
- 30.5
- 31
- 31.2
- 31.4
- 31.5
- 31.9
- 32
- 32.5
- 33
- 33.5
- 33.7
- 33.9
- 34
- 34.3
- 34.4
- 34.5
- 35
- 35.75
- 35.8
- 36
- 36.5
- 37
- 37.4
- 37.5
- 37.75
- 38
- 38.5
- 39
- 39.5
- 39.8
- 40
- 40.4
- 40.5
- 40.6
- 41
- 41.7
- 42
- 42.5
- 43
- 43.2
- 44
- 45
- 45.8
- 46
- 46.2
- 47
- 47.2
- 47.3
- 47.5
- 48
- 49
- 49.6
- 50
- 51
- 51.4
- 51.5
- 51.8
- 52
- 53
- 53.6
- 54
- 54.3
- 55
- 56
- 57
- 57.3
- 58
- 59.1
- 60
- 61.3
- 61.9
- 62
- 63
- 63.1
- 64
- 64.2
- 65
- 66
- 67.1
- 68
- 69
- 69.5
- 70
- 71.1
- 72
- 74
- 75
- 75.1
- 78
- 79.1
- 79.3
- 79.7
- 80
- 82
- 83.1
- 85
- 86
- 87.5
- 88
- 88.9
- 90
- 92
- 93
- 95
- 95.8
- 99
- 100
- 102
- 105
- 108.3
- 110
- 112.4
- 115
- 120
- 125
- 130
- 135
- 140
- 150
- 155
- 160
- 170
- 404
- 406
- 408
- 410
- 412
- 414
- 416
- 417
- 418
- 419
- 422
- 427
- 430
- 433
- 436
-
Screw Nominal (M)
-
I.D. d(inch)
-
Screw Nominal (inch)
-
Thickness T(mm)
- 0.031
- 0.05
- 0.059
- 0.1
- 0.15
- 0.2
- 0.25
- 0.29
- 0.3
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.75
- 1.8
- 1.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.85
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.55
- 3.6
- 3.7
- 3.8
- 4
- 4.1
- 4.2
- 4.3
- 4.5
- 4.6
- 4.7
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 5.9
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.1
- 7.2
- 7.5
- 7.6
- 7.9
- 8
- 8.2
- 8.3
- 8.5
- 8.7
- 9
- 9.1
- 9.3
- 9.5
- 9.8
- 10
- 10.2
- 10.4
- 10.5
- 11
- 11.2
- 11.8
- 12
- 12.5
- 13
- 13.1
- 14
- 15
- 15.8
- 16
- 17
- 18
- 19
- 20
- 20.3
- 21
- 22
- 23
- 24
- 24.5
- 25
- 26
- 27
- 28
- 29
- 30
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
-
Material: Steel
-
Thickness t(inch)
-
Material: Stainless Steel
-
Surface Treatment (Detailed)
-
Type, Spring Washers
-
Type, Toothed Washer
-
Outer Diameter D(inch)
Narrow search by specifying Brand
-
- MISUMI (10)
- SUNCO (86)
- REYHER (75)
- NORELEM (20)
- GANTER (18)
- KIPP (15)
- MAEDLER (13)
- NABEYA BI-TECH (13)
- HEIWA HATSUJYO (12)
- OCHIAI (9)
- ASANO MANUFACTURING (7)
- HALDER (7)
- HIROSUGI-KEIKI (6)
- IMAO CORPORATION (6)
- NORD-LOCK (6)
- TAIYO STAINLESS SPRING (5)
- OHTOMO SS (3)
- SAIMA CORPORATION (3)
- TAKIGEN (3)
- QP FASTENING WORKS (2)
- SEEGER-ORBIS (2)
- BUMAX (2)
- GOSHO WORKS (2)
- IFM ELECTRONIC (2)
- IWATA DENKO (2)
- KEEPER (2)
- MARUEMU WORKS (2)
- OHMI OFT (2)
- OSUNG (2)
- TOKYO METAL (2)
- TRUSCO NAKAYAMA (2)
- YAHATA NEJI (2)
- ACCURATE (1)
- PB FASTENER (1)
- ESCO (1)
- IMPERIAL (1)
- SKF (1)
- KONISHI MFG (1)
- OHKITA (1)
- OPG (1)
- SOHWA SEISAKUSHO (1)
- YAMAHIRO (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Washers / lock washers
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.