MITUTOYO Micrometers（Display Method：Analog）

?* Information on days to ship and prices

• 

  Outside Micrometer Economy Design, Series 103

  MITUTOYO

  A Mitutoyo basic, cost effective, non-digital micrometer with a ratchet stop to guarantee repeatable measurement. High resolution provided by a vernier scale on sleeve.

  Starting from∗ ：	59.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	75.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type, with Clamp Nut

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	74.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Small Standard Type

  MITUTOYO

  This is a standard, small-sized micrometer head which offers you the following benefits:
  - Plain stem and a flat or spherical spindle end
  - Hardened steel measuring surface

  Starting from∗ ：	57.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  External Dial Caliper Gauge

  MITUTOYO

  This analog External Dial Caliper Gauge offers you the following benefits:
  - Excellent resistance against water and dust (IP65 protection level)
  - Optimized measuring force
  - Ergonomically designed to lie securely in your hand when measuring

  Starting from∗ ：	589.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micro Jack

  MITUTOYO

  A Mitutoyo height-adjustable support for accurate levelling of small machines, surface plates, and similar equipment. Easily adjusted under heavy load.

  Starting from∗ ：	504.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Gear Tooth Micrometer

  MITUTOYO

  Measuring the over-pin diameter of gears. It has interchangeable steel or carbide ball inserts (optional accessory).

  Starting from∗ ：	410.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Economy Design Set

  MITUTOYO

  This Mitutoyo set of basic, cost effective, non-digital micrometers incorporating ratchet stops to guarantee repeatable measurement.

  Starting from∗ ：	290.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Inside Micrometer, Interchangeable Rods

  MITUTOYO

  This an interchangeable rod type inside micrometer that offers you the following benefits:
  - Interchangeable measuring rods and spacers achieve the full specified measuring range.
  - Each interchangeable rod is marked with its measuring range.
  An extension handle to help you measure deep bores is included in sets up to 300 mm range.

  Starting from∗ ：	80.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Non-rotating Spindle

  MITUTOYO

  - Micrometer Head featuring a non-rotating spindle for delicate workpieces
  - Design suits applications where the twisting effect of the standard spindle is undesirable because of the risk of damage

  Starting from∗ ：	169.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Differential Screw

  MITUTOYO

  This is a differential screw translator (extra-fine feed) type of micrometer head. It offers you the following benefits:
  Micrometer head with ultra-fine rate of travel.
  With its non-rotating spindle it is particularly suited to fine adjustments. The differential travel mechanism with double spindle enables ultra-sensitive travel

  Starting from∗ ：	265.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Medium-sized Standard, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefit:
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	67.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Spindle Feed, with Clamp Nut

  MITUTOYO

  These micrometer heads have a very fine spindle feed.
  They offer the following benefits:
  - Small size micrometer heads with extremely fine pitch
  - Ideal for fine adjustment applications in scientific apparatus

  Starting from∗ ：	89.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Screw Thread Micrometer, Series 126

  MITUTOYO

  A Mitutoyo non-digital micrometer designed to mount easily interchangeable anvils/spindle-tips for measuring a wide range of screw threads. The highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	371.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Blade Micrometer

  MITUTOYO

  This Blade Micrometer is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts
  - Non-rotating spindle

  Starting from∗ ：	303.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Inside Micrometer

  MITUTOYO

  The Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with caliper jaws to enable measurement in confined spaces. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	390.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Can Seam Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer for measuring the width, height and depth of steel-can seams.

  Starting from∗ ：	262.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Crimp Height Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with pointed spindle to enable measurement of the crimp height of electrical contacts. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	301.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer

  MITUTOYO

  A Mitutoyo non-digital depth micrometer. The 63 mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.

  Starting from∗ ：	174.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer Carbide Tipped Rod

  MITUTOYO

  This Depth Micrometer offers you the following benefits:
  - ∅4 mm measuring rod
  - Ratchet stop provides you with constant measuring force.
  - Measuring rod lock
  - Carbide-tipped measuring rod model is available.

  Starting from∗ ：	207.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer, Interchangeable Rods

  MITUTOYO

  This interchangeable rod type micrometer can be used for wide range measurements.
  It offers you the following benefits:
  - ∅4 mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement.
  - The ratchet stop provides constant measuring force.
  - Measuring rod lock

  Starting from∗ ：	170.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Snap Gauge without Indicator, Inch

  MITUTOYO

  A Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

  Starting from∗ ：	507.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Dial Snap Meter

  MITUTOYO

  A Mitutoyo rapid-retraction-anvil snap meter equipped with a high resolution dial indicator.

  Starting from∗ ：	714.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Snap Meter, Inch

  MITUTOYO

  A Mitutoyo rapid-retraction-anvil snap meter equipped with a high resolution dial indicator.

  Starting from∗ ：	714.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digit Micrometer Head

  MITUTOYO

  This Digit counter type is a micrometer head with a mechanical counter.

  Starting from∗ ：	214.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digit Outside Micrometer

  MITUTOYO

  This Digit Outside Micrometer comes with a mechanical counter and offers you the following benefits:
  - Mechanical Digit counter
  - Quick and easy reading

  Starting from∗ ：	155.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer

  MITUTOYO

  This Disc Micrometer enables you to measure hard-to-reach features, offering you the following benefits:
  - Measuring the root tangent length of spur and helical gears.
  - You can measure recessed features that are difficult to reach with a standard micrometer.

  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer Non-Rotating Spindle Type

  MITUTOYO

  This Disc Micrometer has a non-rotating spindle and allows you measure a range of different materials.
  It offers you the following benefits:
  - It features a non-rotating spindle and disc-shaped measuring surfaces.
  - Measuring the root tangent length of spur and helical gears
  - Measurable range of gear pitch: 0.5-6 module
  - It's suitable for measuring materials such as felt, rubber, cardboard and fabric.

  Starting from∗ ：	325.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer Non-Rotating Spindle Type, Inch

  MITUTOYO

  This Disc Micrometer has a non-rotating spindle and allows you measure a range of different materials.
  It offers you the following benefits:
  - It features a non-rotating spindle and disc-shaped measuring surfaces.
  - Measuring the root tangent length of spur and helical gears
  - Measurable range of gear pitch: 0.5-6 module
  - It's suitable for measuring materials such as felt, rubber, cardboard and fabric.

  Starting from∗ ：	325.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer, Inch

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with disc-ended spindle and anvil to enable measurement of shrouded features, such as gear teeth. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Groove Micrometer, Rotating Spindle

  MITUTOYO

  A Mitutoyo non-digital tubular micrometer equipped with concentric, disc-shaped anvils for making measurements inside holes, such as width, depth and location of grooves and projections. Separate graduations for inside and outside measurements avoid need for corrections for anvil thickness. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	447.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Holtest Internal Micrometer, Series 368

  MITUTOYO

  This is a set of three-point and two-point internal micrometers that offers you the following benefits:
  - Complete unit set
  - Carbide measuring surface
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - Delivered with setting rings and extension rod.

  Starting from∗ ：	384.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hub Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer for measuring hub thickness and shoulder width inside a hole. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	315.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indicating Micrometer with Button Left

  MITUTOYO

  A Mitutoyo non-digital, rapid-retraction-anvil indicating micrometer equipped with a high resolution dial indicator.

  Starting from∗ ：	843.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indicating Micrometer with Button Right

  MITUTOYO

  A Mitutoyo non-digital, rapid-retraction-anvil indicating micrometer equipped with a high resolution dial indicator.

  Starting from∗ ：	859.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Anvil Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer that accepts easily interchangeable anvils to enable a wide variety of measurement, such as tubing thickness, shoulder-edge distance and rivet height. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	333.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Internal Groove Micrometer

  MITUTOYO

  A non-digital tubular Mitutoyo micrometer equipped with concentric, disc-shaped anvils for making measurements inside holes, such as width, depth and location of grooves and projections. Separate graduations for inside and outside measurements avoid need for corrections for anvil thickness. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	543.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Limit Micrometer

  MITUTOYO

  A dual, non-digital Mitutoyo micrometer arranged as a GO/NG adjustable snap gauge, able to test component size against upper and lower tolerance limits simultaneously.

  Starting from∗ ：	476.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head

  MITUTOYO

  These micrometer heads have a very fine spindle.
  They offer the following benefits:
  - Small size micrometer heads with extremely fine pitch of 0.1 mm
  - Ideal for fine adjustment applications in scientific apparatus

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Locking Screw Type, Spherical Spindle

  MITUTOYO

  These micrometer heads feature a knurled locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	97.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head XY-Stage

  MITUTOYO

  A Y-axis style bidirectionally graduated large-thimble, non-digital Mitutoyo micrometer head with plain Ø 18 mm stem and heavy-duty Ø 8 mm spindle fitted with flat non-rotating tip.

  Starting from∗ ：	289.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Starting from∗ ：	89.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable, with Clamp Nut

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Carbide Tipped Spindle

  MITUTOYO

  This small micrometer head with tungsten carbide measuring surface offers you the following benefits:
  - Stem with clamp nut and a flat or spherical spindle end
  - Stem with carbide-tipped spindle

  Starting from∗ ：	72.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...