NS TOOL Square End Mills (Carbide)（Type：Square）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
Adopts a unique Infinity coating for 4-flute end mill. Cuts a wide range of materials from raw materials to high-hardness materials- Volume Discount
Starting from∗ ： 30.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AL-3LS Long Shank End Mill for Aluminum (Under-Shank)
NS TOOL
A slim type with a narrower shank than the blade diameter, supporting vertical wall processing- Volume Discount
Starting from∗ ： 93.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ultra-Fine Machining End Mill Micro Edge MSME100
NS TOOL
Carbide precision specification, blade diameter tolerance ±2 μm, shank tolerance h3 (roundness 0.1 μm). 1-Blade Straight Type- Volume Discount
Starting from∗ ： 126.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSX440 MUGEN-COATING POWER End Mill
NS TOOL
Adoption of unequal lead makes it perfect for semi-rough to rough finishing of stainless steel and difficult to cut materials- Volume Discount
Starting from∗ ： 64.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
MX235 MUGEN-COATING 2-Flute LEAD 35 End Mill
NS TOOL
Resolves the problem of a blade length too short at 2x and too long at 4x- Volume Discount
Starting from∗ ： 18.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
PCD Square End Mill PCDSE
NS TOOL
A highly stable cutting surface has been realized for cutting cemented carbide. Nano-level surface roughness required for high-precision machining can be achievedStarting from∗ ： 333.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SSF120 CBN Super Surface End Mill
NS TOOL
Idea for reference surface protrusion machining during microfabrication. Adopts a unique shape and corner rounding to achieve a stable machined surfaceStarting from∗ ： 146.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SMEZ120 CBN Micro Edge Z
NS TOOL
Sharp edge achieved by matching NS machining technology with carefully selected CBN materialStarting from∗ ： 226.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AL2D-2 Aluminum-Only End Mill (2x Blade Length Type)
NS TOOL
High rigidity type with excellent cost performance- Volume Discount
Starting from∗ ： 28.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)
NS TOOL
Stable machined surface precision can be obtained over a wide range, with suppressed chatter even for high speed machining- Volume Discount
Starting from∗ ： 45.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AL5D-2 Aluminum-Only End Mill (5x Blade Length Type)
NS TOOL
Stable machined surface precision can be obtained over a wide range, with suppressed chatter even for high speed machining- Volume Discount
Starting from∗ ： 74.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AL3D-2DLC Aluminum-Only End Mill (DLC Coating)
NS TOOL
Capable of stable high efficiency machining under all conditions. Adopts a uniquely adhesive high DLC coating suited to long periods of machining- Volume Discount
Starting from∗ ： 56.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NEA-2 Aluminum (Non-Ferrous) End Mill
NS TOOL
Machines using a wide chip pocket and sharp cutting quality.- Volume Discount
Starting from∗ ： 73.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum
NS TOOL
Capable of stable high efficiency machining under all conditions. High-efficiency heavy cutting type with enhanced chip discharge performance- Volume Discount
Starting from∗ ： 48.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX-25 Lead 25 End Mill
NS TOOL
The blade length is the same as the blade diameter and the torsion angle is 25°. Weak torsion angle minimizes workpiece deflection- Volume Discount
Starting from∗ ： 42.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX-30 Lead 30 End Mill
NS TOOL
The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing- Volume Discount
Starting from∗ ： 33.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX-35 Lead 35 End Mill
NS TOOL
The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining- Volume Discount
Starting from∗ ： 44.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX-40 Lead 40 End Mill
NS TOOL
The blade length is 4x the blade diameter and the torsion angle is 40°. Strong torsion angle enables smooth chip discharge- Volume Discount
Starting from∗ ： 62.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX-45 Lead 45 End Mill
NS TOOL
The blade length is 5x the blade diameter and the torsion angle is 45°. Features excellent sharpness enabling deep side cutting- Volume Discount
Starting from∗ ： 95.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MHDH445 4-Flute Square-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy- Volume Discount
Starting from∗ ： 65.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MHDH645 6-Flute Square-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy- Volume Discount
Starting from∗ ： 87.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DX for Copper Electrode / Aluminum / Plastic, 2-Blade End Mill
NS TOOL
Realizing the highest vertical accuracy. Produces a higher grade finished surface accuracy- Volume Discount
Starting from∗ ： 37.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
Adopts a unique Infinity coating for 2-flute end mill. Capable of universal cutting from roughing to finishing- Volume Discount
Starting from∗ ： 19.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSES230P MUGEN-COATING 2-Flute Sharp Edge Short End Mill
NS TOOL
Uses a rigid short blade. Sharp edge provides excellent sharpness, allowing machining with reduced deflection- Volume Discount
Starting from∗ ： 20.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSEM230 MUGEN-COATING 2-Flute Medium End Mill
NS TOOL
The blade length is 4x the blade diameter and the torsion angle is 30°- Volume Discount
Starting from∗ ： 43.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSE345 MUGEN-COATING 3-Flute End Mill
NS TOOL
Adopts a unique Infinity coating for 3-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion- Volume Discount
Starting from∗ ： 64.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
MSE430P MUGEN-COATING 4-Flute Sharp Edge End Mill
NS TOOL
Sharp edge enables a wide range of material to be cut, from non-ferrous metals through to steel. Able to perform finish machining with little deflection- Volume Discount
Starting from∗ ： 37.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
MSEM430 MUGEN-COATING 4-Flute Medium End Mill
NS TOOL
The blade length is 4x the blade diameter and the torsion angle is 30°. Ideal for side finish machining- Volume Discount
Starting from∗ ： 60.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSZ345 MUGEN-COATING POWER "Z" End Mill
NS TOOL
With the newly developed special blade shape, machining capacity is greatly improved. Achieves unprecedented high performance machining from plunging to grooving- Volume Discount
Starting from∗ ： 58.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MHD445 MUGEN-COATING 4-Flute End Mill for Hardened Steel
NS TOOL
Ideal for finishing in high-hardness regions (48-65 HRC). Achieves precision finishing with little deflection- Volume Discount
Starting from∗ ： 65.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSE230M MUGEN-COATING 2-Flute End Mill with Measured Diameter
NS TOOL
Blade diameter dimensions are displayed in 1 micron- Volume Discount
Starting from∗ ： 28.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX225 MUGEN-COATING 2-Flute LEAD 25 End Mill
NS TOOL
Design with increased rigidity minimizes chattering and deflection during grooving- Volume Discount
Starting from∗ ： 18.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX425 MUGEN-COATING 4-Flute LEAD 25 End Mill
NS TOOL
Design with increased rigidity minimizes chattering and deflection of the machined surface- Volume Discount
Starting from∗ ： 29.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
NS TOOL
Standard type that can be used with versatility for grooves or sides- Volume Discount
Starting from∗ ： 18.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX430 MUGEN-COATING 4-Flute LEAD 30 End Mill
NS TOOL
Standard type providing versatile support- Volume Discount
Starting from∗ ： 26.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
NS TOOL
Resolves the problem of a blade length too short at 2x and too long at 4x- Volume Discount
Starting from∗ ： 31.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX240 MUGEN-COATING 2-Flute LEAD 40 End Mill
NS TOOL
Deep processing is smooth, and deflection of machining surface has been minimized while employing a long blade- Volume Discount
Starting from∗ ： 30.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
MX440 MUGEN-COATING 4-Flute LEAD 40 End Mill
NS TOOL
Deep processing is smooth, and deflection of machining surface has been minimized while employing a long blade- Volume Discount
Starting from∗ ： 35.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
MX245 MUGEN-COATING 2-Flute LEAD 45 End Mill
NS TOOL
Deflection of machining surfaces has been minimized while employing an extra-long blade- Volume Discount
Starting from∗ ： 42.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX445 MUGEN-COATING 4-Flute LEAD 45 End Mill
NS TOOL
Capable of high-precision and high-performance machining due to the unique, highly rigid design- Volume Discount
Starting from∗ ： 52.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X Coated Lead 30 End Mill NX-30X
NS TOOL
Can shave hardened steel from HRC 50 to 70. The deflection accuracy is in microns- Volume Discount
Starting from∗ ： 38.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 64.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 85.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 74.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Power Solid Long Blade End Mill NEL-3
NS TOOL
3-flute long blade with 45° high torsion- Volume Discount
Starting from∗ ： 120.62 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product Series | DX for Copper Electrode / Aluminum / Plastic, 2-Blade End Mill | MSE230M MUGEN-COATING 2-Flute End Mill with Measured Diameter | |||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 30.66 € *Unit price with basic configuration Volume Discount | 93.85 € *Unit price with basic configuration Volume Discount | 126.03 € *Unit price with basic configuration Volume Discount | 64.99 € *Unit price with basic configuration Volume Discount | 18.22 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 333.28 € *Unit price with basic configuration | 146.69 € *Unit price with basic configuration | 226.66 € *Unit price with basic configuration | 28.74 € *Unit price with basic configuration Volume Discount | 45.91 € *Unit price with basic configuration Volume Discount | 74.53 € *Unit price with basic configuration Volume Discount | 56.40 € *Unit price with basic configuration Volume Discount | 73.58 € *Unit price with basic configuration Volume Discount | 48.77 € *Unit price with basic configuration Volume Discount | 42.09 € *Unit price with basic configuration Volume Discount | 33.50 € *Unit price with basic configuration Volume Discount | 44.01 € *Unit price with basic configuration Volume Discount | 62.12 € *Unit price with basic configuration Volume Discount | 95.50 € *Unit price with basic configuration Volume Discount | 65.94 € *Unit price with basic configuration Volume Discount | 87.88 € *Unit price with basic configuration Volume Discount | 37.33 € *Unit price with basic configuration Volume Discount | 19.20 € *Unit price with basic configuration Volume Discount | 20.15 € *Unit price with basic configuration Volume Discount | 43.04 € *Unit price with basic configuration Volume Discount | 64.99 € *Unit price with basic configuration Volume Discount | 37.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 60.22 € *Unit price with basic configuration Volume Discount | 58.31 € *Unit price with basic configuration Volume Discount | 65.94 € *Unit price with basic configuration Volume Discount | 28.74 € *Unit price with basic configuration Volume Discount | 18.25 € *Unit price with basic configuration Volume Discount | 29.69 € *Unit price with basic configuration Volume Discount | 18.25 € *Unit price with basic configuration Volume Discount | 26.83 € *Unit price with basic configuration Volume Discount | 31.61 € *Unit price with basic configuration Volume Discount | 30.66 € *Unit price with basic configuration Volume Discount | 35.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 42.09 € *Unit price with basic configuration Volume Discount | 52.58 € *Unit price with basic configuration Volume Discount | 38.28 € *Unit price with basic configuration Volume Discount | 64.04 € *Unit price with basic configuration Volume Discount | 85.96 € *Unit price with basic configuration Volume Discount | 74.53 € *Unit price with basic configuration Volume Discount | 120.62 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days |
| Blade diameter (D)(φ) | 1 ～ 12 | 5 ～ 12 | 0.01 ～ 0.05 | 3 ～ 18 | 0.1 ～ 12 | 0.1 ～ 1 | 0.2 ～ 2 | 0.03 ～ 0.1 | 0.5 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 12 | 3 ～ 6 | 1 ～ 12 | 0.5 ～ 12 | 0.5 ～ 12 | 0.5 ～ 12 | 0.5 ～ 11.9 | 0.5 ～ 11.9 | 1 ～ 4 | 5 ～ 12 | 0.5 ～ 6 | 0.1 ～ 12 | 0.1 ～ 12 | 0.5 ～ 12 | 3 ～ 12 | 1 ～ 12 | 1 ～ 20 | 1 ～ 12 | 1 ～ 4 | 0.1 ～ 6 | 0.3 ～ 12 | 1 ～ 12 | 0.1 ～ 12 | 1 ～ 12 | 1 ～ 12 | 0.3 ～ 12 | 1 ～ 12 | 0.3 ～ 12 | 1 ～ 12 | 1 ～ 6 | 1 ～ 12 | 3 ～ 12 | 3 ～ 6 | 6 ～ 20 |
| work material | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Aluminum[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | - | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] / Copper[◎] | Aluminum[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] |
| Blade length (ℓ)(mm) | 2.5 ～ 30 | 7.5 ～ 18 | 0.01 ～ 0.05 | 8 ～ 32 | 0.3 ～ 36 | 0.02 ～ 0.2 | 0.1 ～ 1 | 0.03 ～ 0.1 | 1 ～ 24 | 3 ～ 36 | 5 ～ 60 | 3 ～ 36 | 10 ～ 30 | 1.5 ～ 18 | 0.5 ～ 12 | 1 ～ 24 | 1.5 ～ 36 | 2 ～ 47.6 | 2.5 ～ 59.5 | 2 ～ 8 | 10 ～ 36 | 1 ～ 12 | 0.15 ～ 30 | 0.15 ～ 24 | 2 ～ 48 | 8 ～ 30 | 2.5 ～ 30 | 4 ～ 80 | 1.5 ～ 26 | 1.5 ～ 8 | 0.15 ～ 15 | 0.3 ～ 12 | 1 ～ 12 | 0.2 ～ 24 | 2 ～ 24 | 3 ～ 36 | 1.2 ～ 48 | 4 ～ 48 | 1.5 ～ 60 | 5 ～ 60 | 2 ～ 12 | 2.5 ～ 23 | 8 ～ 23 | 8 ～ 13 | 25 ～ 85 |
| Number of flutes(sheet) | 4 | 3 | 1 | 4 | 2 | 2 ～ 6 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 4 | 6 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 3 | 4 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 2 | 3 | 4 | 3 |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | TiAlN | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Shank diameter (d)(mm) | 4 ～ 12 | 4 ～ 10 | 4 | 6 ～ 20 | 4 ～ 12 | 4 | 4 | 4 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 | 6 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 6 ～ 12 | 6 | 6 ～ 20 |
| Overall Length (L)(mm) | 45 ～ 80 | 80 ～ 150 | 45 | 55 ～ 105 | 45 ～ 80 | 48 | 50 | 50 | 45 ～ 80 | 45 ～ 90 | 50 ～ 110 | 45 ～ 90 | 50 ～ 70 | 45 ～ 80 | 40 ～ 70 | 40 ～ 75 | 40 ～ 85 | 45 ～ 105 | 40 ～ 110 | 60 | 60 ～ 90 | 45 ～ 60 | 45 ～ 80 | 45 ～ 80 | 50 ～ 110 | 50 ～ 80 | 45 ～ 80 | 50 ～ 140 | 45 ～ 80 | 60 | 45 ～ 55 | 45 ～ 80 | 45 ～ 80 | 45 ～ 80 | 45 ～ 80 | 45 ～ 80 | 45 ～ 105 | 45 ～ 105 | 45 ～ 105 | 45 ～ 105 | 40 ～ 50 | 45 ～ 70 | 45 ～ 70 | 45 ～ 50 | 75 ～ 165 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | 0.1 ～ 1 | 0.5 ～ 5 | - | - | - | - | - | - | 3 ～ 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove |
| Blade tip shape | With Lead | With Lead | With Lead | Micro R | With Lead | With Lead | Micro R | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | No torsion | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.5
-
63
-
64
-
65
-
67
-
70～70.5
- 70
- 70.5
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
120
-
130
-
150
-
200
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Narrow search by specifying Brand
-
- MISUMI (75)
- NS TOOL (75)
- OSG (74)
- SANDVIK (47)
- NACHI(FUJIKOSHI) (40)
- GUHRING (38)
- DIJET (18)
- KYOCERA (16)
- OKAZAKI SEIKO (16)
- ASAHI TOOLS (13)
- KYOWA SEIKO (13)
- 7 LEADERS (11)
- THE CUT (9)
- EIKOSHA (6)
- TOYO DRILL (5)
- ATOM (5)
- SANKO MFG (4)
- GCT (2)
- SPEED TIGER (2)
- UNION TOOL (2)
- PROCHI (1)
- TAIYO-TOOL (1)
- VAN_HOORN (1)
- WIDIN (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Square End Mills (Carbide)
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.