Vi håller på att översätta vår butik till svenska!
Men eftersom vi har många produkter och sidor tar det tid. Under tiden finns vår produktkatalog på engelska. Tack för ditt tålamod!

Filtreringsvillkor

Rensa alla

  • Blade diameter (D)(φ)
  • R Size(mm)
  • work material
  • Blade length (ℓ)(mm)
  • Number of flutes(sheet)
  • Type
  • Tillverkare

OSG Carbide Radius End Mills(Machining Application:Plane)

  • Cermet End Mill (for Bottom Surface Finishing), FX-MCF

      OSG

      Cermet End Mill (for Bottom Surface Finishing), FX-MCF

      End mills dedicated to bottom surface finishing, adopted cermet base metal plus FX coating. Stunning high-speed mirror finish machining.
      Mer information
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      80.1General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]1.24Radius100812
      Pris (exklusive MOMS) från:
      101.83 €
      Pris inklusive MOMS:
      121.18 €
      Ordinarie avsändningsdatum:
      6 arbetsdagar
      Konfigurera
    • 2-Flute Corner R Short GX-CR-EDS-SF

        OSG

        2-Flute Corner R Short GX-CR-EDS-SF

        Mushroom shape super hard corner radius end mills developed for shrink fitting.
        Mer information
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        120.5General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]122Radius346-
        Pris (exklusive MOMS) från:
        68.32 €
        Pris inklusive MOMS:
        81.30 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • 2-Flute, Corner R Short, CBN-CR-EDS

          OSG

          2-Flute, Corner R Short, CBN-CR-EDS

          2-flute CBN-CR-EDS with short corner radius-shows high performance in machining high-strength materials.
          Mer information
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ~ 60.2 ~ 2General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[○]3 ~ 62Radius45 ~ 506-
          Pris (exklusive MOMS) från:
          187.96 €
          Pris inklusive MOMS:
          223.67 €
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • 2-Flute Corner R Short FX-CR-EDS-6

            OSG

            2-Flute Corner R Short FX-CR-EDS-6

            Corner Radius End Mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center.
            Mer information
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            0.5 ~ 2.50.1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.7 ~ 3.72Radius5061.5 ~ 5
            Pris (exklusive MOMS) från:
            65.64 €
            Pris inklusive MOMS:
            78.11 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • 2-Flute Corner R Short FX-CR-MG-EDS
            • Volume Discount

            OSG

            2-Flute Corner R Short FX-CR-MG-EDS

            Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.
            Mer information
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            2 ~ 40.1 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]6 ~ 112Radius40 ~ 704 ~ 6-
            Pris (exklusive MOMS) från:
            87.51 €
            Pris inklusive MOMS:
            104.14 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • 2-Flute, Corner R Long, FX-CR-MG-EDL

              OSG

              2-Flute, Corner R Long, FX-CR-MG-EDL

              Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.
              Mer information
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              16 ~ 202General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]48 ~ 562Radius140 ~ 16016 ~ 20-
              Pris (exklusive MOMS) från:
              548.08 €
              Pris inklusive MOMS:
              652.22 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS

                OSG

                New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS

                An end-mill with a concept of ultra high speed processing of aluminum alloys. Suitable for high efficiency processing of large size aluminum parts for air craft.
                Mer information
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                12 ~ 251 ~ 3Aluminum[◎]14 ~ 272Radius90 ~ 11012 ~ 2540 ~ 56
                Pris (exklusive MOMS) från:
                233.00 €
                Pris inklusive MOMS:
                277.27 €
                Ordinarie avsändningsdatum:
                6 arbetsdagar
                Konfigurera
              • 3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS
                • Volume Discount

                OSG

                3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS

                Even in machining of aluminum parts with high cutting removal rate, performs chip discharge ability excellent in creating of unique groove form, at the same time achieving significant depth of cut and high feed.
                Mer information
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                6 ~ 120.5 ~ 2Aluminum[◎] / Copper[◎] / Resin[○]13 ~ 263Radius50 ~ 756 ~ 12-
                Pris (exklusive MOMS) från:
                66.10 €
                Pris inklusive MOMS:
                78.66 €
                Ordinarie avsändningsdatum:
                6 arbetsdagar
                Konfigurera
              • Carbide End Mill Phoenix (High Feeder Bull Nose) PHX-CRT

                  OSG

                  Carbide End Mill Phoenix (High Feeder Bull Nose) PHX-CRT

                  Corner radius type with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.
                  Mer information
                  Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                  1 ~ 50.3 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]2 ~ 103Radius60 ~ 7064 ~ 15
                  Pris (exklusive MOMS) från:
                  98.58 €
                  Pris inklusive MOMS:
                  117.31 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • Carbide End Mill Phoenix (Deep Feeder Radius) PHX-DFR

                    OSG

                    Carbide End Mill Phoenix (Deep Feeder Radius) PHX-DFR

                    Adopt WXS coating of ultra heat-resistant and ultra-hard coating
                    Mer information
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    6 ~ 201.5 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]12 ~ 403Radius80 ~ 1506 ~ 20-
                    Pris (exklusive MOMS) från:
                    88.29 €
                    Pris inklusive MOMS:
                    105.07 €
                    Ordinarie avsändningsdatum:
                    6 arbetsdagar
                    Konfigurera
                  • Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE
                    • Volume Discount

                    OSG

                    Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE

                    Supports variety of cutter paths from roughing to finish machining, due to short blade of high rigidity and neck relief type.
                    Mer information
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    121Aluminum[◎] / Copper[◎] / Resin[○]183Radius9012-
                    Pris (exklusive MOMS) från:
                    191.40 €
                    Pris inklusive MOMS:
                    227.77 €
                    Ordinarie avsändningsdatum:
                    6 arbetsdagar
                    Konfigurera
                  • 4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS
                    • Volume Discount

                    OSG

                    4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS

                    Suppressing chatter due to the effect of evolutionary "unequal lead".
                    Mer information
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    3 ~ 100.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]6 ~ 204Radius50 ~ 706 ~ 10-
                    Pris (exklusive MOMS) från:
                    109.70 €
                    Pris inklusive MOMS:
                    130.54 €
                    Ordinarie avsändningsdatum:
                    6 arbetsdagar
                    Konfigurera
                  • Corner Long Shank for 2-Flute Graphite DIA-LS-CRED

                      OSG

                      Corner Long Shank for 2-Flute Graphite DIA-LS-CRED

                      Thin standing wall processing tool for graphite electrode. Step processing compatibility prevents chatter mark and edge chipping. Radius blade is on the shank side as well.
                      Mer information
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      5 ~ 110.3 ~ 1Graphite[◎]10 ~ 222Radius100 ~ 1804 ~ 10-
                      Pris (exklusive MOMS) från:
                      160.88 €
                      Pris inklusive MOMS:
                      191.45 €
                      Ordinarie avsändningsdatum:
                      6 arbetsdagar
                      Konfigurera
                    • WX21 Carbide End Mill (Super Radius), WX-CRE
                      • Volume Discount

                      OSG

                      WX21 Carbide End Mill (Super Radius), WX-CRE

                      New type of radius end mill that achieves high efficiency in roughing of mold. Performs high-efficiency direct carving of hardened steel.
                      Mer information
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      5 ~ 131.2 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[◎]2 ~ 5.54Radius80 ~ 1106 ~ 1212.5
                      Pris (exklusive MOMS) från:
                      110.60 €
                      Pris inklusive MOMS:
                      131.61 €
                      Ordinarie avsändningsdatum:
                      6 arbetsdagar
                      Konfigurera
                    • Powerful Type Multi-Function DLC-PKE

                        OSG

                        Powerful Type Multi-Function DLC-PKE

                        Ultra-smooth DLC coating does high-speed machining of aluminum, and of course, semi-dry processing.
                        Mer information
                        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                        3 ~ 200.5 ~ 3Aluminum[◎] / Copper[○] / Resin[◎]4.5 ~ 303Radius50 ~ 1256 ~ 20-
                        Pris (exklusive MOMS) från:
                        76.90 €
                        Pris inklusive MOMS:
                        91.51 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • Powerful Type Multi-Function FXS-PKE
                        • Volume Discount

                        OSG

                        Powerful Type Multi-Function FXS-PKE

                        In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.
                        Mer information
                        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                        3 ~ 200.2 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]5 ~ 304Radius60 ~ 1606 ~ 209 ~ 60
                        Pris (exklusive MOMS) från:
                        95.20 €
                        Pris inklusive MOMS:
                        113.29 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE
                        • Volume Discount

                        OSG

                        Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE

                        Suitable for high efficiency machining of pocket engraving by required minimum blade length and strength torsion. The total length of the tool just fits to shrink - HSK.
                        Mer information
                        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                        60.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]94Radius506-
                        Pris (exklusive MOMS) från:
                        122.60 €
                        Pris inklusive MOMS:
                        145.89 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS
                        • Volume Discount

                        OSG

                        WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS

                        High helix radius end mill with both chip discharge ability and cutting edge rigidity at high level. In addition to the usual two-dimensional processing, supports a wide range of cutter paths such as ramping and profile machining.
                        Mer information
                        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                        60.3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]134Radius606-
                        Pris (exklusive MOMS) från:
                        116.30 €
                        Pris inklusive MOMS:
                        138.40 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS
                        • Volume Discount

                        OSG

                        Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS

                        Radius end mills for high rigidity high-speed machining. Can perform high-speed machining of hardened steel.
                        Mer information
                        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                        6 ~ 250.2 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]15 ~ 506 ~ 8Radius90 ~ 1806 ~ 25-
                        Pris (exklusive MOMS) från:
                        106.85 €
                        Pris inklusive MOMS:
                        127.15 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS
                        • Volume Discount

                        OSG

                        Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS

                        Suppressing chatter due to the effect of evolutionary "unequal lead".
                        Mer information
                        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                        80.3 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]166Radius608-
                        Pris (exklusive MOMS) från:
                        171.80 €
                        Pris inklusive MOMS:
                        204.44 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • Multi-Function Type for Deep Wall Applications FXS-MFE

                          OSG

                          Multi-Function Type for Deep Wall Applications FXS-MFE

                          A wide standing wall is machined with high efficiency and precision in step cutting.Coated for steelStandard/Alteration Category: Manufacturer's standard productNumber of flutes (pcs.) 4Spiral angle, Strong spiral (45 to 60°).
                          Mer information
                          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                          100.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]154Radius1308-
                          Pris (exklusive MOMS) från:
                          225.60 €
                          Pris inklusive MOMS:
                          268.46 €
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • 2-Flute, 4-Blade Pencil Neck / Long Neck Corner R DG-CPR

                            OSG

                            2-Flute, 4-Blade Pencil Neck / Long Neck Corner R DG-CPR

                            The radius of the carbide cutter is suitable for diamond coating of graphite.
                            Mer information
                            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                            0.5 ~ 120.1 ~ 1Graphite[◎]0.9 ~ 122 ~ 4Long-Neck Radius50 ~ 1504 ~ 124 ~ 60
                            Pris (exklusive MOMS) från:
                            89.92 €
                            Pris inklusive MOMS:
                            107.00 €
                            Ordinarie avsändningsdatum:
                            6 arbetsdagar
                            Konfigurera
                          • Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR
                            • Volume Discount

                            OSG

                            Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR

                            High-precision bull nose (radius) end mill for shape machining of mold. Performs also high-speed cutting of hardened steel due to WXS coating with excellent heat resistance.
                            Mer information
                            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                            0.4 ~ 40.05 ~ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎]0.3 ~ 42 ~ 4Long-Neck Radius50 ~ 704 ~ 61 ~ 20
                            Pris (exklusive MOMS) från:
                            72.80 €
                            Pris inklusive MOMS:
                            86.63 €
                            Ordinarie avsändningsdatum:
                            6 arbetsdagar
                            Konfigurera
                          • Phoenix Pencil Neck Deep Feeders Radius, PHX-PC-DFR
                            • Volume Discount

                            OSG

                            Phoenix Pencil Neck Deep Feeders Radius, PHX-PC-DFR

                            Radius cutter with pencil neck, which enables highly efficient machining of deep parts prone to chattering and hard-to-cut materials.
                            Mer information
                            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                            2 ~ 120.5 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]3 ~ 183Long-Neck Radius60 ~ 2206 ~ 2010 ~ 160.8
                            Pris (exklusive MOMS) från:
                            85.23 €
                            Pris inklusive MOMS:
                            101.42 €
                            Ordinarie avsändningsdatum:
                            6 arbetsdagar
                            Konfigurera
                          • Long Neck Deep Feeders Radius, PHX-LN-DFR

                              OSG

                              Long Neck Deep Feeders Radius, PHX-LN-DFR

                              It enables highly efficient machining of deep parts that tend to chatter and of materials that are difficult to machine. Radius cutter with long neck.
                              Mer information
                              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                              4 ~ 161 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]6 ~ 243Long-Neck Radius70 ~ 1754 ~ 1620 ~ 120
                              Pris (exklusive MOMS) från:
                              83.42 €
                              Pris inklusive MOMS:
                              99.27 €
                              Ordinarie avsändningsdatum:
                              6 arbetsdagar
                              Konfigurera
                            • CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR

                                OSG

                                CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR

                                The three-dimensional negative shape of the R-profile provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.
                                Mer information
                                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                                0.5 ~ 30.05 ~ 0.5General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.3 ~ 1.82Radius45 ~ 504 ~ 61.5 ~ 6
                                Pris (exklusive MOMS) från:
                                101.29 €
                                Pris inklusive MOMS:
                                120.54 €
                                Ordinarie avsändningsdatum:
                                6 arbetsdagar
                                Konfigurera
                              • Carbide End Mill Phoenix Long Neck Tough Radius PHX-LN-CRE
                                • Volume Discount

                                OSG

                                Carbide End Mill Phoenix Long Neck Tough Radius PHX-LN-CRE

                                4-cutter radius cutter with long neck, suitable for rib machining.
                                Mer information
                                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                                0.8 ~ 30.1 ~ 0.5General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○]0.32 ~ 1.24Long-Neck Radius5042 ~ 16.65
                                Pris (exklusive MOMS) från:
                                84.40 €
                                Pris inklusive MOMS:
                                100.44 €
                                Ordinarie avsändningsdatum:
                                6 arbetsdagar
                                Konfigurera
                              • CBN End Mill (Small-Diameter, 2-Flute, Long Neck Radius) CBN-LN-SXR

                                  OSG

                                  CBN End Mill (Small-Diameter, 2-Flute, Long Neck Radius) CBN-LN-SXR

                                  The CBN construction allows for highly efficient and accurate machining, and fewer tool changes make for continuous machining, which reduces costs.
                                  Mer information
                                  Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                                  0.5 ~ 30.05 ~ 0.5General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.3 ~ 1.82Long-Neck Radius45 ~ 504 ~ 62.5 ~ 12
                                  Pris (exklusive MOMS) från:
                                  114.29 €
                                  Pris inklusive MOMS:
                                  136.01 €
                                  Ordinarie avsändningsdatum:
                                  6 arbetsdagar
                                  Konfigurera