OSG Carbide Radius End Mills（work material：Quenched and tempered steel）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE
OSG
Suitable for high efficiency machining of pocket engraving by required minimum blade length and strength torsion. The total length of the tool just fits to shrink - HSK.- Volume Discount
Starting from∗ ： 122.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR
OSG
The three-dimensional negative shape of the R-profile provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.Starting from∗ ： 101.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short FX-CR-MG-EDS
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.- Volume Discount
Starting from∗ ： 59.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS
OSG
Radius end mills for high rigidity high-speed machining. Can perform high-speed machining of hardened steel.- Volume Discount
Starting from∗ ： 106.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short GX-CR-EDS-SF
OSG
Mushroom shape super hard corner radius end mills developed for shrink fitting.Starting from∗ ： 56.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Corner R Short, CBN-CR-EDS
OSG
2-flute CBN-CR-EDS with short corner radius
-shows high performance in machining high-strength materials.Starting from∗ ： 187.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short FX-CR-EDS-6
OSG
Corner Radius End Mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center.Starting from∗ ： 65.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Corner R Long, FX-CR-MG-EDL
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.Starting from∗ ： 93.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill Phoenix (High Feeder Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.Starting from∗ ： 98.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill Phoenix (Deep Feeder Radius) PHX-DFR
OSG
Adopt WXS coating of ultra heat-resistant and ultra-hard coatingStarting from∗ ： 88.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS
OSG
Sharp positive cutting edge prevents the occurrence of work hardening and similar. With corner R, it can support a variety of cutter paths.Starting from∗ ： 95.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Flute Corner R, Long, FX-CR-MG-EML
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.Starting from∗ ： 360.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS
OSG
Suppressing chatter due to the effect of evolutionary "unequal lead".- Volume Discount
Starting from∗ ： 109.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
WX21 Carbide End Mill (Super Radius), WX-CRE
OSG
New type of radius end mill that achieves high efficiency in roughing of mold. Performs high-efficiency direct carving of hardened steel.- Volume Discount
Starting from∗ ： 89.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cermet End Mill (for Bottom Surface Finishing), FX-MCF
OSG
End mills dedicated to bottom surface finishing, adopted cermet base metal plus FX coating. Stunning high-speed mirror finish machining.Starting from∗ ： 94.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Powerful Type Multi-Function FXS-PKE
OSG
In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.- Volume Discount
Starting from∗ ： 95.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS
OSG
High helix radius end mill with both chip discharge ability and cutting edge rigidity at high level. In addition to the usual two-dimensional processing, supports a wide range of cutter paths such as ramping and profile machining.- Volume Discount
Starting from∗ ： 116.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS
OSG
Suppressing chatter due to the effect of evolutionary "unequal lead".- Volume Discount
Starting from∗ ： 145.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Multi-Function Type for Deep Wall Applications FXS-MFE
OSG
A wide standing wall is machined with high efficiency and precision in step cutting.
Coated for steel
Standard/Alteration Category: Manufacturer's standard product
Number of flutes (pcs.) 4
Spiral angle, Strong spiral (45 to 60°).Starting from∗ ： 225.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR
OSG
High-precision bull nose (radius) end mill for shape machining of mold. Performs also high-speed cutting of hardened steel due to WXS coating with excellent heat resistance.- Volume Discount
Starting from∗ ： 72.80 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Phoenix Pencil Neck Deep Feeders Radius, PHX-PC-DFR
OSG
Radius cutter with pencil neck, which enables highly efficient machining of deep parts prone to chattering and hard-to-cut materials.- Volume Discount
Starting from∗ ： 85.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Neck Deep Feeders Radius, PHX-LN-DFR
OSG
It enables highly efficient machining of deep parts that tend to chatter and of materials that are difficult to machine. Radius cutter with long neck.Starting from∗ ： 83.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill Phoenix Long Neck Tough Radius PHX-LN-CRE
OSG
4-cutter radius cutter with long neck, suitable for rib machining.- Volume Discount
Starting from∗ ： 84.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CBN End Mill (Small-Diameter, 2-Flute, Long Neck Radius) CBN-LN-SXR
OSG
The CBN construction allows for highly efficient and accurate machining, and fewer tool changes make for continuous machining, which reduces costs.Starting from∗ ： 114.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Blade diameter (D)(φ) |
| R Size(mm) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Overall Length (L)(mm) |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE | CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR | Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS | 4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS | WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS | Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS | Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR | CBN End Mill (Small-Diameter, 2-Flute, Long Neck Radius) CBN-LN-SXR | ||||||||||||||||
| Starting from∗ | 122.60 € *Unit price with basic configuration Volume Discount | 101.29 € *Unit price with basic configuration | 59.59 € *Unit price with basic configuration Volume Discount | 106.85 € *Unit price with basic configuration Volume Discount | 56.95 € *Unit price with basic configuration | 187.96 € *Unit price with basic configuration | 65.64 € *Unit price with basic configuration | 93.71 € *Unit price with basic configuration | 98.58 € *Unit price with basic configuration | 88.29 € *Unit price with basic configuration | 95.88 € *Unit price with basic configuration | 360.75 € *Unit price with basic configuration | 109.70 € *Unit price with basic configuration Volume Discount | 89.60 € *Unit price with basic configuration Volume Discount | 94.84 € *Unit price with basic configuration | 95.20 € *Unit price with basic configuration Volume Discount | 116.30 € *Unit price with basic configuration Volume Discount | 145.60 € *Unit price with basic configuration Volume Discount | 225.60 € *Unit price with basic configuration | 72.80 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 85.23 € *Unit price with basic configuration Volume Discount | 83.42 € *Unit price with basic configuration | 84.40 € *Unit price with basic configuration Volume Discount | 114.29 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days |
| Blade diameter (D)(φ) | 6 ～ 12 | 0.5 ～ 3 | 1 ～ 12 | 6 ～ 25 | 10 ～ 20 | 3 ～ 6 | 0.5 ～ 2.5 | 6 ～ 20 | 1 ～ 5 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 3 ～ 25 | 2 ～ 13 | 6 ～ 20 | 3 ～ 20 | 6 | 6 ～ 25 | 10 | 0.2 ～ 4 | 2 ～ 12 | 4 ～ 16 | 0.8 ～ 3 | 0.5 ～ 3 |
| R Size(mm) | 0.5 ～ 1 | 0.05 ～ 0.5 | 0.1 ～ 3 | 0.2 ～ 3 | 0.5 ～ 1 | 0.2 ～ 2 | 0.1 | 0.5 ～ 3 | 0.3 ～ 1 | 1.5 ～ 3 | 0.2 | 0.5 ～ 3 | 0.2 ～ 5 | 0.5 ～ 3 | 0.1 ～ 0.4 | 0.2 ～ 3 | 0.3 | 0.3 ～ 5 | 0.5 | 0.05 ～ 0.5 | 0.5 ～ 2 | 1 ～ 3 | 0.1 ～ 0.5 | 0.05 ～ 0.5 |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] |
| Blade length (ℓ)(mm) | 9 ～ 18 | 0.3 ～ 1.8 | 2.5 ～ 26 | 15 ～ 50 | 10 ～ 20 | 3 ～ 6 | 0.7 ～ 3.7 | 20 ～ 56 | 2 ～ 10 | 12 ～ 40 | 13 ～ 26 | 48 ～ 56 | 6 ～ 50 | 0.8 ～ 5.5 | 0.9 ～ 3.2 | 5 ～ 30 | 13 | 12 ～ 50 | 15 | 0.15 ～ 4 | 3 ～ 18 | 6 ～ 24 | 0.32 ～ 1.2 | 0.3 ～ 1.8 |
| Number of flutes(sheet) | 4 | 2 | 2 | 6 ～ 8 | 2 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 4 | 3 ～ 4 | 4 | 4 | 4 | 6 | 4 | 2 ～ 4 | 3 | 3 | 4 | 2 |
| Type | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius |
| Overall Length (L)(mm) | 50 ～ 80 | 45 ～ 50 | 40 ～ 110 | 90 ～ 180 | 32 ～ 58 | 45 ～ 50 | 50 | 90 ～ 160 | 60 ～ 70 | 80 ～ 150 | 90 ～ 110 | 140 ～ 160 | 50 ～ 120 | 60 ～ 110 | 90 ～ 160 | 60 ～ 160 | 60 | 50 ～ 120 | 130 | 50 ～ 80 | 60 ～ 220 | 70 ～ 175 | 50 | 45 ～ 50 |
| Shank diameter (d)(mm) | 6 ～ 12 | 4 ～ 6 | 4 ～ 12 | 6 ～ 25 | 6 ～ 12 | 6 | 6 | 6 ～ 20 | 6 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 6 ～ 25 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 | 6 ～ 25 | 8 | 4 ～ 6 | 6 ～ 20 | 4 ～ 16 | 4 | 4 ～ 6 |
| Underneck length (ℓ1)(mm) | - | 1.5 ～ 6 | - | - | - | - | 1.5 ～ 5 | - | 4 ～ 15 | - | - | - | - | 5 ～ 24 | 9 ～ 30 | 9 ～ 60 | - | - | - | 0.5 ～ 35 | 10 ～ 160.8 | 20 ～ 120 | 2 ～ 16.65 | 2.5 ～ 12 |
| Machining Application | Plane / Side / Curved surface | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts |
| Coating | TiAlN | - | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - |
| Torsion Angle (θ) | High Helix (45˚ to 60˚) | - | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | No torsion | No torsion | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion | No torsion | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
| R Precision(μm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0～-0.01 | ±0.005 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
R Size(mm)
-
work material
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
-
Number of flutes(sheet)
-
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Brand
-
- MISUMI (50)
- OSG (24)
- NS TOOL (14)
- UNION TOOL (11)
- NACHI(FUJIKOSHI) (7)
- DIJET (5)
- KYOWA SEIKO (5)
- 7 LEADERS (4)
- GUHRING (4)
- OKAZAKI SEIKO (4)
- SANKO MFG (4)
- SANDVIK (2)
- THE CUT (2)
- VAN_HOORN (2)
- ATOM (1)
- SPEED TIGER (1)
- WATERMILLS (0)
- TAIYO-TOOL (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Radius End Mills
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.