OSG Screw-Hole-Related Tools（Screw size (Nominal)：M12）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Starting from∗ ： 32.18 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Starting from∗ ： 18.77 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, General Purpose EX-SFT
OSG
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.- Volume Discount
- Stock
Starting from∗ ： 19.17 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, for Stainless EX-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Starting from∗ ： 20.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll VP-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Starting from∗ ： 49.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for Difficult-to-Machine Material, CPM-POT
OSG
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 24.83 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Nut Tap Series Nut Tap NT
OSG
Primarily for thread cutting on nuts. Takes the workability of nuts into consideration with a long screw thread section and shank section and is capable of continuous operation until the nuts fill the shank section.- Volume Discount
Starting from∗ ： 77.59 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series, Tin Coated, TIN-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.- Volume Discount
Starting from∗ ： 47.36 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Starting from∗ ： 31.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap- Volume Discount
Starting from∗ ： 26.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Carbide Spiral Tap OT-SFT
OSG
Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machineStarting from∗ ： 160.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Starting from∗ ： 51.77 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT
OSG
Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 25.81 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Starting from∗ ： 182.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 61.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Starting from∗ ： 31.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT
OSG
Ideal for removing weld spatter and cutting chips inside the internal thread.
Tool material: vanadium high-speed steel
Coating: surface treatment, uncoated
Number of threads on chamfer: 5P
Accuracy (grade) 0.06- Volume Discount
Starting from∗ ： 18.96 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT
OSG
Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface- Volume Discount
Starting from∗ ： 54.07 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hard Hand Tap, OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Starting from∗ ： 130.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT
OSG
Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) TappingStarting from∗ ： 156.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Hand Tap Series, for Difficult-to-Machine Material, CPM-HT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 27.03 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series Carbide New Roll Tap OT-NRT
OSG
Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.Starting from∗ ： 189.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 46.99 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series, Spiral Tap, Long Shank A-LT-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Starting from∗ ： 37.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT
OSG
Allows internal threading of stainless steel with a water soluble cutting fluid.
Tool material: Vanadium high speed steel
Hole type: For blind holes
Material: General steel/stainless steel.- Volume Discount
Starting from∗ ： 34.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT
OSG
Suitable for threading hardened steel up to 55 HRC.
Material: High hardness steel up to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3- Volume Discount
Starting from∗ ： 156.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Starting from∗ ： 56.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT
OSG
Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.Starting from∗ ： 34.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, Short Chamfer Type, EX-SC-SFT
OSG
Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch- Volume Discount
Starting from∗ ： 20.02 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Starting from∗ ： 42.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for High-Carbon Steels EX-HC-SFT
OSG
Suitable for drilling holes in materials such as high carbon materials greater than medium carbon steel, die steel, alloyed steel.- Volume Discount
Starting from∗ ： 21.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Tin Coated, TIN-HT
OSG
Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.- Volume Discount
Starting from∗ ： 30.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, General Long Shank, EX-LT
OSG
Long shank type.
Tool material: vanadium high-speed steel
Working material: general steel / cast iron / aluminium / copper.- Volume Discount
Starting from∗ ： 36.69 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT
OSG
Suitable for massive tapping of aluminum alloy castings by high precision automatic machineStarting from∗ ： 151.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet DR-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityStarting from∗ ： 512.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityStarting from∗ ： 552.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 31.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Starting from∗ ： 19.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT
OSG
Shows the great sharpness and durability when used in through holes of machinability bad stainless steel- Volume Discount
Starting from∗ ： 41.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, General Homo Treatment, EX-H-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 18.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, General Long Shank, EX-LT-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 25.83 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Ultra Synchronizing Taps, HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Starting from∗ ： 42.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Starting from∗ ： 45.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Starting from∗ ： 48.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for Deep Holes, EX-DH-POT
OSG
Suitable for through holes with extra long threads and materials that easily suffer sticking.- Volume Discount
Starting from∗ ： 20.73 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Point Tap Series, for Difficult-to-Machine Material, CPM-POT | Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT | Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT | Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT | Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S | Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT | Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT | Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT | Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT | Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT | Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT | Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT | ||||||||||||||||||||||||||||||||
| Starting from∗ | 32.18 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 18.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.17 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 20.22 € *Unit price with basic configuration Volume Discount | 49.26 € *Unit price with basic configuration Volume Discount | 24.83 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 77.59 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 47.36 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.58 € *Unit price with basic configuration Volume Discount | 26.83 € *Unit price with basic configuration Volume Discount | 160.88 € *Unit price with basic configuration | 51.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 25.81 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 182.00 € *Unit price with basic configuration | 61.28 € *Unit price with basic configuration Volume Discount | 31.74 € *Unit price with basic configuration Volume Discount | 18.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 54.07 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 130.54 € *Unit price with basic configuration | 156.54 € *Unit price with basic configuration | 27.03 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 189.58 € *Unit price with basic configuration | 46.99 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 37.13 € *Unit price with basic configuration | 34.74 € *Unit price with basic configuration Volume Discount | 156.54 € *Unit price with basic configuration Volume Discount | 56.88 € *Unit price with basic configuration Volume Discount | 34.74 € *Unit price with basic configuration | 20.02 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 42.46 € *Unit price with basic configuration Volume Discount | 21.33 € *Unit price with basic configuration Volume Discount | 30.84 € *Unit price with basic configuration Volume Discount | 36.69 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 151.12 € *Unit price with basic configuration | 512.42 € *Unit price with basic configuration | 552.50 € *Unit price with basic configuration | 31.58 € *Unit price with basic configuration Volume Discount | 19.82 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 41.15 € *Unit price with basic configuration Volume Discount | 18.42 € *Unit price with basic configuration Volume Discount | 25.83 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 42.66 € *Unit price with basic configuration Volume Discount | 45.06 € *Unit price with basic configuration Volume Discount | 48.36 € *Unit price with basic configuration | 20.73 € Special price *Unit price with basic configuration Promotional pricingVolume Discount |
| Min. Shipping Days ： | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 |
| Pitch (P), Number of Threading(mm) | 1 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1 ～ 1.75 | 1.25 | 1.25 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1.25 ～ 1.75 | 0.5 ～ 1.75 | 1 ～ 1.75 | 1.75 | 1.75 | 1.25 ～ 1.75 | 1.25 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1.25 | 1.25 ～ 1.75 | 1.25 | 1.25 ～ 1.75 | 1.25 ～ 1.75 | 1.75 | 1.25 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1.25 ～ 1.75 | 1.25 ～ 1.75 | 1.25 ～ 1.75 | 1.5 ～ 1.75 |
| Chamfer threads (Lcf) | 1.5P ～ 2.5P | 5P | 2.5P | 2.5P | 2P ～ 4P | 5P | - | 2P ～ 4P | 5P | 2.5P | 1.5P ～ 2.5P | 2P ～ 4P | 3P | 1.5P ～ 3P | 5P | 2.5P | 5P | 2.5P ～ 5P | 1.5P ～ 3P | 3P | 2P ～ 5P | 2P | - | 2.5P | 2.5P | 2.5P ～ 5P | 2.5P | 2.5P | 1.5P | 2.5P | 3P | 1.5P ～ 5P | 1.5P | 1.5P | - | - | 5P | 4P | 4P | 5P | 5P | 6P | 5P | 6P | 4P |
| Tool Material Type | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Powder high-speed steel | Powder high-speed steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Carbide | Carbide | Powder high-speed steel | Carbide | Alloy HSS | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Quenched and tempered steel (45 to 55 HRC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | High Hardness Steel (50-60 HRC)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] |
| Tap Type | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Roll tap | Point tap | Thread-Cutting-Related Tool | Roll tap | Point tap | Spiral Tap | Spiral Tap | Roll tap | Spiral Tap | Hand Tap | Point tap | Spiral Tap | Modification/removal Tool | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Roll tap | Die | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Hand Tap | Thread cutter | Thread cutter | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap |
| Hole type | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | - | For blind hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole |
| Coating Y/N | Available | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | N/A | N/A | Available | N/A | N/A | Available | Available | N/A | Available | N/A | Available | N/A | N/A | N/A | Available | Available | Available | Available | Available | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | N/A | Available | Available | Available | N/A |
| Coating Type | Other | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | Non-Coated | TiN | Other | Non-Coated | Non-Coated | TiCN | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | TiCN | Non-Coated | TiCN | Non-Coated | Non-Coated | Non-Coated | Other | CrN | TiCN | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | TiAlN | TiAlN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | TiN | Non-Coated |
| Overall Length (L)(mm) | 82 | 82 | 82 | 82 | 82 | 82 | 140 | 82 | 82 | 100 ～ 200 | 82 | 82 | 82 | 150 | 150 | 82 | 80 | 82 | 80 ～ 82 | 82 | 82 | 82 | - | 100 ～ 200 | 82 | 82 | 150 | 82 | 82 | 150 | 82 | 82 | 150 | 82 | 89 | 89 | 82 | 82 | 150 | 82 | 100 ～ 200 | 82 | 82 | 100 ～ 150 | 82 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (10)
- OSG (56)
- YAMAWA MFG (56)
- SANDVIK (9)
- REX TOOLS (8)
- GUHRING (5)
- NACHI(FUJIKOSHI) (5)
- CARMEX (4)
- SKC (4)
- GEDORE (3)
- EIKOSHA (2)
- ISHIHASHI (1)
- TANOI MFG (1)
- TRUSCO NAKAYAMA (1)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- RENNSTEIG (0)
- ESCO (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.