OSG Screw-Hole-Related Tools（work material：Bronze (Pb)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Starting from∗ ： 16.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, General Purpose EX-SFT
OSG
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.- Volume Discount
- Stock
Starting from∗ ： 7.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Starting from∗ ： 7.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll VP-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Min. Shipping Days ： 6 Days -
- Promotional pricing
Nut Tap Series Nut Tap NT
OSG
Primarily for thread cutting on nuts. Takes the workability of nuts into consideration with a long screw thread section and shank section and is capable of continuous operation until the nuts fill the shank section.- Volume Discount
Starting from∗ ： 27.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand Tap Series, for General, HT
OSG
High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.- Volume Discount
Starting from∗ ： 8.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Starting from∗ ： 15.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap- Volume Discount
Starting from∗ ： 14.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Carbide Spiral Tap OT-SFT
OSG
Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machineStarting from∗ ： 72.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Parallel Tap Series for Pipes General Applications SPT
OSG
For use when machining parallel female pipe taper threads and female pipe parallel threads- Volume Discount
Starting from∗ ： 14.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Starting from∗ ： 88.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 22.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, V Coated, V-POT
OSG
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping- Volume Discount
Starting from∗ ： 24.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Starting from∗ ： 16.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hard Hand Tap, OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Starting from∗ ： 60.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Starting from∗ ： 133.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 12.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
A Tap Series, Spiral Tap, Long Shank A-LT-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Starting from∗ ： 24.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Starting from∗ ： 23.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, V Coated, V-SFT
OSG
Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.- Volume Discount
Starting from∗ ： 17.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, Low Spiral LW-SFT
OSG
Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.- Volume Discount
Starting from∗ ： 9.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT
OSG
Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.- Volume Discount
Starting from∗ ： 11.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Tin Coated, TIN-HT
OSG
Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.- Volume Discount
Starting from∗ ： 16.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, General Long Shank, EX-LT
OSG
Long shank type.
Tool material: vanadium high-speed steel
Working material: general steel / cast iron / aluminium / copper.- Volume Discount
Starting from∗ ： 17.31 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT
OSG
Suitable for massive tapping of aluminum alloy castings by high precision automatic machineStarting from∗ ： 66.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series MC-Planet Cutters PNGT
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Starting from∗ ： 205.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Starting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityStarting from∗ ： 324.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Starting from∗ ： 15.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, V Coating, Long Shank, V-LT-POT
OSG
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-TappingStarting from∗ ： 23.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, General Long Shank, EX-LT-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 14.02 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Taper Tap Series for Pipes TIN Coated TIN-TPT
OSG
TIN coating with excellent solvent resistance, abrasion resistance has been applied.- Volume Discount
Starting from∗ ： 30.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT
OSG
TIN coating with excellent solvent resistance, abrasion resistance has been applied.- Volume Discount
Starting from∗ ： 31.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap OT-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Starting from∗ ： 133.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Starting from∗ ： 162.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT
OSG
In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.Starting from∗ ： 121.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT
OSG
In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.Starting from∗ ： 148.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Groove-Free Tap Series For Non-Ferrous Alloy B-NRT
OSG
Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.- Volume Discount
Starting from∗ ： 11.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Taper Tap Series for American Pipes for General Application (NPSF) SPT
OSG
Used for machining of parallel female pipe taper threads and female pipe parallel threadsStarting from∗ ： 30.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 10.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 9.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 53.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 47.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
A Tap Series Point Tap Long Shank A-LT-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.Starting from∗ ： 23.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT | Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT | Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L | Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT | Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT | Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT | Taper Tap Series for American Pipes for General Application (NPSF) SPT | Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM | Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W | Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT | ||||||||||||||||||||||||||||||||
| Starting from∗ | 16.04 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.97 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | - Volume Discount | 27.21 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 8.29 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 14.47 € *Unit price with basic configuration Volume Discount | 72.40 € *Unit price with basic configuration | 14.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 88.83 € *Unit price with basic configuration | 22.83 € *Unit price with basic configuration Volume Discount | 24.73 € *Unit price with basic configuration Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 60.78 € *Unit price with basic configuration | 133.79 € *Unit price with basic configuration | 12.94 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 24.50 € *Unit price with basic configuration | 23.77 € *Unit price with basic configuration Volume Discount | 17.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.50 € *Unit price with basic configuration Volume Discount | 11.71 € *Unit price with basic configuration Volume Discount | 16.26 € *Unit price with basic configuration Volume Discount | 17.31 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 66.96 € *Unit price with basic configuration | 205.83 € *Unit price with basic configuration | 158.30 € *Unit price with basic configuration Volume Discount | 324.46 € *Unit price with basic configuration | 15.45 € *Unit price with basic configuration Volume Discount | 23.17 € *Unit price with basic configuration | 14.02 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 30.48 € *Unit price with basic configuration Volume Discount | 31.88 € *Unit price with basic configuration Volume Discount | 133.79 € *Unit price with basic configuration | 162.75 € *Unit price with basic configuration | 121.33 € *Unit price with basic configuration | 148.20 € *Unit price with basic configuration | 11.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 30.94 € *Unit price with basic configuration | 10.88 € *Unit price with basic configuration Volume Discount | 9.74 € *Unit price with basic configuration Volume Discount | 53.57 € *Unit price with basic configuration | 47.40 € *Unit price with basic configuration | 23.65 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | Same day | Same day | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 8 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days |
| Specifications |
| |||||||||||||||||||||||||||||||||||||||||||
| Screw Types | Meter / Unified | Meter / Unified | Meter / Unified / Whitworth / Sewing Machine | Meter / Unified | Meter | Meter / Unified / Whitworth / Sewing Machine | Meter / Unified | Meter | Meter | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter / Unified / Taper for Pipe | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Meter | Parallel for Pipes | Sewing Machine | Whitworth | Taper for Pipe | Taper for Pipe | Meter |
| Screw size (Nominal) | 1-8UNC ～ M56 | 1UN ～ M56 | No0UN ～ M48 | M1 ～ M12 | M6 ～ M12 | No0UN ～ M35 | 1/2-20UNF ～ M24 | M2 ～ M36 | M3 ～ M12 | G1 ～ G7/8 | M3 ～ M20 | M3 ～ M24 | M8 ～ M10 | M1.4 ～ M16 | M1.4 ～ M20 | R1/2 ～ R3/8 | M3 ～ M30 | M2 ～ M24 | M3 ～ M16 | M2 ～ M16 | M6 | M8 ～ M16 | M2 ～ M24 | 3/8UN ～ M12 | M3 ～ M12 | - | - | M6 ～ M12 | M1.4 ～ M42 | M4 ～ M6 | M2 ～ M36 | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | G1/2 ～ G3/8 | G1/2 ～ G3/8 | M2 ～ M20 | NPS1/16 | SM1/4 ～ SM15/64 | W1/8 | Rc1/2 ～ Rc3/8 | Rc1/2 ～ Rc3/8 | M2 ～ M24 |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 5.5 | 0.25 ～ 48 | 0.25 ～ 80 | 0.25 ～ 56 | 0.5 ～ 1 | 0.25 ～ 80 | 0.25 ～ 3 | 0.4 ～ 4 | 0.5 ～ 1.75 | 11 ～ 28 | 0.5 ～ 2.5 | 0.5 ～ 3 | 1 ～ 1.25 | 0.3 ～ 2 | 0.3 ～ 2.5 | 14 ～ 28 | 0.5 ～ 3.5 | 0.25 ～ 3 | 0.5 ～ 2 | 0.4 ～ 2 | 1 | 1.25 ～ 1.5 | 0.4 ～ 3 | 0.75 ～ 16 | 0.5 ～ 1.75 | 1 ～ 19 | 1 ～ 28 | 1 ～ 1.75 | 0.3 ～ 4.5 | 0.7 ～ 1 | 0.4 ～ 4 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 0.4 ～ 1.5 | 27 | 20 ～ 56 | 40 | 14 ～ 28 | 14 ～ 28 | 0.25 ～ 3 |
| Chamfer threads (Lcf) | 1.5P ～ 2.5P | 2.5P ～ 3P | 5P | 2P ～ 4P | - | 1.5P ～ 9P | 5P | 2.5P | 1.5P ～ 2.5P | 1.5P ～ 4P | 1.5P ～ 3P | 5P | 5P | 2.5P | 1.5P ～ 3P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P ～ 5P | 1.5P ～ 5P | 1.5P | - | - | - | 5P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 3P | 2P ～ 4P | 4P | 2.5P | 2.5P | 2.5P | 2.5P | 5P |
| Tool Material Type | Powder high-speed steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | High-speed steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Cobalt HSS | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel |
| work material | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[◎] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[◎] | Bronze (Pb)[◎] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[◎] | Bronze (Pb)[◎] | Bronze (Pb)[◎] | Bronze (Pb)[◎] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] | Bronze (Pb)[○] |
| Tap Type | Spiral Tap | Spiral Tap | Point tap | Roll tap | Thread-Cutting-Related Tool | Hand Tap | Point tap | Spiral Tap | Spiral Tap | Tap for pipes | Hand Tap | Point tap | Point tap | Spiral Tap | Hand Tap | Tap for pipes | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Hand Tap | Thread cutter | Thread cutter | Thread cutter | Point tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Roll tap | Tap for pipes | Spiral Tap | Spiral Tap | Tap for pipes | Tap for pipes | Point tap |
| Hole type | For blind hole | For blind hole | For through hole | For blind hole | - | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole |
| Coating Y/N | Available | N/A | N/A | Available | N/A | N/A | Available | N/A | N/A | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | Available | N/A | N/A | Available | N/A | N/A | Available | Available | Available | Available | Available | N/A | Available | Available | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | Available | Available | Available |
| Coating Type | Other | Non-Coated | Non-Coated | TiCN | Non-Coated | Non-Coated | Other | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiCN | TiN | Non-Coated | Non-Coated | Non-Coated | Other | TiN | Other | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | TiN | TiAlN | TiAlN | TiN | TiCN | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Other |
| Overall Length (L)(mm) | 34 ～ 250 | 30 ～ 205 | 30 ～ 185 | 30 ～ 82 | 120 ～ 140 | 30 ～ 145 | 34 ～ 120 | 80 ～ 300 | 46 ～ 82 | 55 ～ 170 | 100 ～ 150 | 100 ～ 200 | 70 ～ 75 | 34 ～ 95 | 34 ～ 105 | 55 ～ 80 | 46 ～ 135 | 80 ～ 200 | 100 ～ 150 | 40 ～ 95 | 62 | 70 ～ 95 | 40 ～ 120 | 100 ～ 150 | 46 ～ 82 | 80 ～ 210 | 60 ～ 120 | 62 ～ 89 | 34 ～ 175 | 100 | 80 ～ 300 | 55 ～ 95 | 55 ～ 95 | 55 ～ 80 | 100 ～ 150 | 55 ～ 80 | 100 ～ 150 | 40 ～ 105 | 55 | 42 ～ 65 | 46 | 100 ～ 150 | 100 ～ 150 | 80 ～ 200 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (15)
- OSG (44)
- YAMAWA MFG (29)
- CARMEX (26)
- SKC (23)
- NS TOOL (1)
- RUKO (1)
- WALTER PROTOTYP (1)
- NACHI(FUJIKOSHI) (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.