SANDVIK Cutters / Indexable End Mills（Machining Application：Groove）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 505.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 505.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 231.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Side Cutter, Milling Cutter, Front Face Milling Cutter
SANDVIK
A versatile high feed router
[Features]It is a tool with a high productivity roughing concept, used when high chip removal is the top priority
The 10° pressure angle allows face milling at a very high feed rate.Starting from∗ ： 873.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 701.76 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 542.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 708.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,666.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,391.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 544.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroMill 328 Cutter
SANDVIK
General purpose cutters for a wide range of grooving, threading and chamfering.Starting from∗ ： 532.56 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 833.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,063.34 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 371.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 694.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 650.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 472.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 625.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32
SANDVIK
Sandvik, cutter / indexable end mill, CoroMill 331, full side cutter, processing width of 6.0 to 12.0 mm, 331.32.Starting from∗ ： 1,669.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroMill 390 End Mill Threaded-Type Coupling R390-T
SANDVIK
[Features]
Rivals the performance of solid end mills
High precision
No miss-matches
Shoulder cutting
Grooving
Profiling
Helical machining
Lapping
Can be used for all types of machining
Threaded-type couplingStarting from∗ ： 421.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 472.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 379.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 490.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 443.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 892.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,194.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Machining Application |
| blade diameter D(mm) |
| work material |
| Mounting Method |
| Finish category |
| Overall length (L)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Compatible Tip Material |
| Maximum Cutting Depth (Ad)(mm) |
| Underneck length (ℓ1)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C | CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting | CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32 | End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18 | CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32 | CoroMill 327 Coromant Capto Short, Without Gripper Groove C-391.327 | CoroMill 327 ER For Rotary Tools, Integrated Collet Type 392.ER327 | CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A | Multi-Functional Tool CoroPlex MT, For Turning & Milling On Multi-Task Machines | |||||||||||||||||
| Starting from∗ | 505.90 € *Unit price with basic configuration | 505.90 € *Unit price with basic configuration | 231.25 € *Unit price with basic configuration | 873.27 € *Unit price with basic configuration | 701.76 € *Unit price with basic configuration | 542.99 € *Unit price with basic configuration | 708.71 € *Unit price with basic configuration | 1,666.84 € *Unit price with basic configuration | 1,391.30 € *Unit price with basic configuration | 544.15 € *Unit price with basic configuration | 532.56 € *Unit price with basic configuration | 833.88 € *Unit price with basic configuration | 1,063.34 € *Unit price with basic configuration | 371.47 € *Unit price with basic configuration | 694.80 € *Unit price with basic configuration | 650.77 € *Unit price with basic configuration | 472.30 € *Unit price with basic configuration | 625.27 € *Unit price with basic configuration | 1,669.44 € *Unit price with basic configuration | 421.31 € *Unit price with basic configuration | 472.32 € *Unit price with basic configuration | 379.55 € *Unit price with basic configuration | 490.83 € *Unit price with basic configuration | 443.32 € *Unit price with basic configuration | 892.98 € *Unit price with basic configuration | 1,194.29 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| blade diameter D(mm) | 10 ～ 32 | 12 ～ 50 | - | 52 | 63 ～ 80 | 20 ～ 100 | 50 ～ 160 | 82 ～ 127 | 100 | 40 ～ 50 | 39 ～ 44 | 69.7 ～ 166.7 | 80 ～ 160 | 12 ～ 40 | 40 | 40 ～ 250 | 20 ～ 40 | 40 ～ 84 | 82 ～ 127 | 16 ～ 42 | 20 ～ 80 | - | - | 8 ～ 30/32 | 30 ～ 50 | 32 ～ 40 |
| work material | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Stainless Steel / Cast Iron / Aluminum / Copper | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium | General Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Cast Iron | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin | General Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | General Steel / Cast Iron / Titanium |
| Mounting Method | Centering Plug | With handle | With handle | Arbor | Arbor | Centering Plug | Arbor | Arbor | Arbor | With handle | With handle | Arbor | Arbor | With handle | With handle | Arbor | With handle | Centering Plug | Arbor | Centering Plug | Centering Plug | Centering Plug | Centering Plug | With handle | - | Centering Plug |
| Finish category | Finishing | Finishing | Finishing | Rough and medium rough processing | Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing / Finishing | Finishing | Finishing | Rough and medium rough processing / Finishing | Finishing | Rough and medium rough processing | Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing | Rough and medium rough processing / Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing | Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing | Finishing | Rough and medium rough processing | Finishing | Finishing |
| Overall length (L)(mm) | - | 91 ～ 257 | 74 ～ 160 | - | - | - | 50 ～ 63 | - | - | 240 | 125 | - | 50 ～ 63 | 68 ～ 110 | 170 | - | 74 ～ 112 | - | - | - | - | - | - | 83 ～ 240 | - | 130 ～ 165 |
| Shank diameter (d)(mm) | - | 20 ～ 50 | 12 ～ 20 | - | 22 ～ 27 | - | 22 ～ 50.8 | 27 ～ 40 | 22 | 32 | 25 | 22 ～ 50.8 | 25.4 ～ 50.8 | 16 ～ 32 | 32 | 16 ～ 60 | 16 ～ 32 | - | 27 ～ 40 | 8 ～ 16 | 48 | - | - | 12 ～ 32 | - | - |
| Number of flutes(sheet) | 2 | 2 ～ 4 | - | 3 | 5 ～ 8 | 2 ～ 10 | 3 ～ 8 | 6 ～ 10 | 6 | 2 ～ 3 | 2 ～ 3 | 6 ～ 18 | 7 ～ 12 | 1 ～ 6 | 4 | 4 ～ 16 | 2 ～ 6 | 3 ～ 6 | 6 ～ 10 | 2 ～ 4 | 2 ～ 8 | - | - | - | - | 2 |
| Compatible Tip Material | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Diamond (PCD) | - | Carbide Coat | Carbide Coat | - |
| Maximum Cutting Depth (Ad)(mm) | 8.6 ～ 28.6 | 10.8 ～ 44.6 | - | 2 | 5 | 5.5 ～ 10 | 6 ～ 10 | - | 15 | 6 ～ 10 | 3 ～ 4 | 6 | 15.4 ～ 15.7 | 10 ～ 15.7 | 10 | 5.5 ～ 10 | 5.5 ～ 10 | 15.4 | - | 10 | 5.5 | - | - | 1.2 ～ 4.8 | 28.3 ～ 44.6 | 10 |
| Underneck length (ℓ1)(mm) | 18 | 20 ～ 145 | - | - | - | 23 ～ 70 | - | - | - | 63 | 23 | - | - | - | 50 | - | 25 ～ 50 | 38 ～ 100 | - | 25 ～ 45 | 40 ～ 58 | - | - | 19 ～ 54 | 50 ～ 95 | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Machining Application
-
blade diameter D(mm)
- 4.29 - 12.70
- 4.52 - 9.53
- 4.60 - 13.00
- 5
- 5.00 - 10.00
- 5.00 - 12.00
- 5.69 - 12.70
- 6
- 7.00 - 12.00
- 7.42 - 12.70
- 7.49 - 15.88
- 7.60 - 16.00
- 7.87 - 15.88
- 8
- 8.00 - 15.00
- 8.00 - 16.00
- 8.60 - 20.00
- 8.86 - 15.88
- 9.00 - 16.00
- 9.04 - 19.05
- 9.525
- 9.7
- 10
- 10.00 - 20.00
- 10.59 - 19.05
- 11.05 - 19.05
- 11.3
- 11.60 - 20.00
- 11.7
- 12
- 12.00 / 16.20
- 12.00 - 20.00
- 12.00 / 20.10
- 12.00 / 22.90
- 12.00 / 23.40
- 12.00 - 24.00
- 12.7
- 13
- 13.2
- 13.21 / 17.42
- 13.21 / 21.29
- 13.21 / 24.61
- 13.21 / 27.20
- 13.4
- 13.50 - 25.00
- 13.7
- 14
- 14.00 - 25.40
- 15
- 15.00 - 25.00
- 15.4
- 15.7
- 15.875
- 15.88
- 16
- 16.00 - 32.00
- 16.2
- 16.60 - 25.00
- 16.94 - 31.75
- 16.99 - 25.40
- 17
- 17.00 - 25.00
- 17.20 - 32.00
- 17.6
- 18
- 18.2
- 18.4
- 18.9
- 19
- 19.05
- 19.56 / 30.96
- 19.7
- 20
- 20
- 20.00 - 32.00
- 20.2
- 20.50 / 31.90
- 20.50 - 32.00
- 20.50 / 36.90
- 20.9
- 21
- 21.20 - 36.00
- 22
- 22.00 - 32.00
- 23.2
- 23.29 - 38.10
- 23.4
- 23.8
- 24
- 24.00 - 32.00
- 25
- 25
- 25.20 - 40.00
- 25.4
- 25.50 / 29.70
- 25.50 / 33.60
- 25.50 / 36.90
- 25.50 / 39.50
- 25.91 / 30.10
- 25.91 / 33.99
- 25.91 / 37.31
- 25.91 / 39.90
- 26
- 26.8
- 27.20 - 42.00
- 28
- 28.2
- 29.40 - 44.00
- 30
- 30/32
- 30.7
- 31.75
- 32
- 32
- 33
- 33.4
- 34
- 35
- 35.20 - 50.00
- 35.9
- 35.99 - 50.80
- 36
- 36.7
- 37.20 - 52.00
- 37.40 - 52.00
- 38
- 38.1
- 38.2
- 39
- 39.40 - 54.00
- 39.5
- 40
- 40
- 40.50 / 51.90
- 42
- 43
- 44
- 45
- 46.4
- 47
- 48.20 - 63.00
- 48.69 - 63.50
- 48.7
- 49.4
- 50
- 50
- 50.50 / 61.90
- 50.8
- 51
- 51.2
- 51.20 - 66.00
- 51.30 - 66.00
- 52
- 52.2
- 54
- 54.08
- 55
- 60
- 61.39 - 76.20
- 61.7
- 62.5
- 62.992
- 63
- 63
- 63.4
- 63.5
- 63.50 / 74.90
- 64
- 64.08
- 65
- 65.20 - 80.00
- 66
- 66.04
- 68
- 69.20 - 84.00
- 69.40 - 84.00
- 69.7
- 70
- 75
- 75.5
- 75.997
- 76
- 76.2
- 77.08
- 77.08
- 77.2
- 78.08
- 78.7
- 80
- 80
- 80.01
- 82
- 83.4
- 84
- 85.20 - 100.00
- 86
- 86.7
- 86.79 - 101.60
- 88
- 89.4
- 90
- 92.5
- 94.08
- 94.08
- 98.7
- 98.8
- 100
- 100.00 - 107.00
- 101.3
- 101.6
- 101.60 - 108.61
- 101.60 - 117.40
- 102
- 103
- 105
- 106.7
- 109
- 110
- 112.5
- 114.08
- 114.08
- 118.8
- 120
- 123.7
- 124.6
- 125
- 125.00 - 132.00
- 127
- 127.00 - 134.01
- 127.00 - 142.80
- 128.4
- 130
- 131.4
- 131.7
- 136
- 137.5
- 138.8
- 139.08
- 139.08
- 140
- 150
- 152
- 152.4
- 152.40 - 159.41
- 152.40 - 168.20
- 159.6
- 160
- 160.00 - 167.00
- 166.7
- 172.5
- 174.08
- 174.08
- 178.8
- 180
- 200
- 200.00 - 207.00
- 203
- 203.2
- 203.20 - 210.21
- 203.20 - 219.00
- 212.5
- 218.8
- 249.6
- 250
- 250.00 - 257.00
- 250.00 - 265.80
- 254
- 254.00 - 261.00
- 254.00 - 261.01
- 254.00 - 269.80
- 262.5
- 268.8
- 304.8
- 304.80 - 311.81
- 305
- 314.6
- 315
- 315.00 - 322.00
- 354.6
- 355
- 355.00 - 362.00
- 399.6
- 400
- 400.00 - 407.00
- 406
- 406.40 - 413.41
- 499.6
- 500
- 500.00 - 507.00
- 508
- 508.00 - 515.01
-
work material
-
Mounting Method
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
2.18～5.82
- 2.18
- 2.64
- 2.7
- 2.79
- 3.66
- 3.7
- 4.52
- 4.7
- 5.7
- 5.82
-
19.99
-
20～29.06
- 20
- 24.99
- 25
- 26
- 27
- 29.06
-
30～38
- 30
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 40.01
- 41.05
- 41.78
- 42.95
- 43
- 44.5
- 45
- 45.009
- 46
- 48
- 49
-
50～59.99
- 50
- 50$50.7
- 50.01
- 50.013
- 51
- 53.26
- 54
- 56.9
- 57
- 59.08
- 59.99
-
60～68
- 60
- 60.25
- 61.77
- 62.99
- 62.992
- 63
- 63$63.7
- 63.5
- 65
- 68
-
70～79
- 70
- 70.002
- 73
- 74
- 75
- 76
- 77.7
- 78
- 79
-
80～89.99
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
- 89.99
-
90～98.7
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 107
- 108
- 109
-
110～119.99
- 110
- 110.01
- 111
- 112
- 115
- 117
- 119.99
-
120～128
- 120
- 121
- 123
- 123.5
- 124
- 125
- 127
- 128
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～147
- 140
- 141
- 143
- 144
- 144.78
- 145
- 147
-
150～159.99
- 150
- 152.4
- 155
- 158
- 159.99
-
160～166
- 160
- 161
- 165
- 165.1
- 166
-
170～177
- 170
- 171
- 172
- 173
- 175
- 176
- 177
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 190.5
- 191
-
200～209
- 200
- 203.2
- 207
- 209
-
210～219
- 210
- 215
- 217
- 219
-
220～228.6
- 220
- 221
- 228.6
-
230
-
240
-
250～257
- 250
- 254
- 255
- 256
- 257
-
260～266.8
- 260
- 266.8
-
270
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Compatible Tip Material
-
Maximum Cutting Depth (Ad)(mm)
-
Underneck length (ℓ1)(mm)
Narrow search by specifying Brand
-
- MISUMI (1)
- KYOCERA (27)
- SANDVIK (26)
- DIJET (19)
- OSG (18)
- BIG KAISER (6)
- ASAHI TOOLS (3)
- MITSUBISHI MATERIALS (0)
- PHOENIX CONTACT (0)
- FUJIGEN (0)
- TUNGALOY (0)
- ESCO (0)
- NACHI(FUJIKOSHI) (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Cutters / Indexable End Mills
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.