SANDVIK Holding Tools for O.D. Tuning（Cutting Direction：Left-hand Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 134.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 158.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 150.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 150.12 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 135.05 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR / L
SANDVIK
Excellent cutting chip control and process stability for one of the best part qualityStarting from∗ ： 150.12 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 256.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 190.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 135.05 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 416.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 414.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 344.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 414.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 474.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 284.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 284.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 206.90 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 399.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 326.28 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 425.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 558.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR / L
SANDVIK
[Features]
A highly rigid double clamp cutting head for lathe turning
Supports the use of internal coolant
High tool rigidity
Supports the use of negative inserts
Supports everything from roughing through to finishingStarting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 441.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 416.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 461.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11
SANDVIK
[Features]
An outer-diameter turning tool featuring stable insert clamping and excellent repeatability.
Produces an unimpeded flow of cutting chips.
Requires little space for operation.
Features a small number of component parts.
For outer-diameter turning (bore cutting) operations.Starting from∗ ： 144.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 145.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 144.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 172.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 171.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,819.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,819.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 562.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 284.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SANDVIK CoroTurn Prime Cutting Unit for Turning
SANDVIK
[Specifications]
・Cutting Direction: Right-hand, Left-hand
・eClass-5.1: 21010903
[Features]
・Flexibility suitable for turning in all directions
・Wiper insert available for excellent surface finish
・Double speed and feed rates for faster metal removal
・Shim-protected tip seat for security
・TR-style locking interface for stability
・Over and under coolant with Coromant Capto holders and QS shanks
・Coromant Capto Prime Cutting Unit for External Machining
・All-directional turningStarting from∗ ： 526.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK T-Max Cutting Unit for Turning
SANDVIK
[Specifications]
・Type: Cutting head
・Cutting Direction: Right-hand, Left-hand, No-hand
・eClass-5.1: 21010903
For productive turning of difficult-to-machine materials.Min. Shipping Days ： 5 Days -
SANDVIK T-Max S Shank Tool for Turning
SANDVIK
[Specifications]
・Type: Shank tool
・Cutting Direction: Right-hand, Left-hand, No-hand
・eClass-5.1: 21010903Min. Shipping Days ： 5 Days -
SANDVIK Coromant Capto Miniturret for Three Rectangular Shank Tools
SANDVIK
[Specifications]
・Type: Miniature turret
・Cutting Direction: Right-hand, Left-hand
・eClass-5.1: 21010903Starting from∗ ： 1,946.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK T-Max Shank Tool for Turning
SANDVIK
[Specifications]
・Type: Shank tool
・Cutting Direction: Right-hand, Left-hand, No-hand
・No coolant
・eClass-5.1: 21010903Min. Shipping Days ： 5 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Application |
| Clamp Shape |
| Cutting Direction |
| Applicable Tip Clearance Angle Type |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR / L | Cutting Head, Outer Diameter Turning Positive Inserts, CoroTurn, C3-SVHBR/L-22040-11 | Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR / L | Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSSNR/L -4 | Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR / L | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1 | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJCR/L-E11HP | Outer Diameter Turning, Shank Tool Bit For Profiling, T-Max Top Clamp, R / L170.5 | Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4 | Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp, CRSNR/L5040T25 | Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTFNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTJNR / L | Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR / L | Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13MCL | Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR / L | Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13MBL | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STTCL1616H11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S | Heavy Cutting, High Precision Bur Peeling Holder, L190.1-K075J008 | Heavy Cutting, High Precision Bur Peeling Holder, L190.1-K080J008 | Heavy Turning, Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSKNR / L | SANDVIK Coromant Capto Miniturret for Three Rectangular Shank Tools | |||||||||||
| Starting from∗ | 134.39 € *Unit price with basic configuration | 158.23 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 135.05 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 256.74 € *Unit price with basic configuration | 190.68 € *Unit price with basic configuration | 135.05 € *Unit price with basic configuration | 416.67 € *Unit price with basic configuration | 414.83 € *Unit price with basic configuration | 344.42 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 414.83 € *Unit price with basic configuration | 474.67 € *Unit price with basic configuration | 284.55 € *Unit price with basic configuration | 284.55 € *Unit price with basic configuration | 206.90 € *Unit price with basic configuration | 399.58 € *Unit price with basic configuration | 326.28 € *Unit price with basic configuration | 425.39 € *Unit price with basic configuration | 558.06 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 441.01 € *Unit price with basic configuration | 416.67 € *Unit price with basic configuration | 461.76 € *Unit price with basic configuration | 144.94 € *Unit price with basic configuration | 145.49 € *Unit price with basic configuration | 144.94 € *Unit price with basic configuration | 172.14 € *Unit price with basic configuration | 171.94 € *Unit price with basic configuration | 1,819.37 € *Unit price with basic configuration | 1,819.37 € *Unit price with basic configuration | 562.69 € *Unit price with basic configuration | 284.55 € *Unit price with basic configuration | 526.15 € *Unit price with basic configuration | - | - | 1,946.77 € *Unit price with basic configuration | - |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Applicable Tip Shape | C (80° Diamond-Shape) | R (Circular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | W (Hexagonal Type) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | S (Rectangular) | R (Circular) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | Other | S (Rectangular) | R (Circular) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | - | - | - | S (Rectangular) | - | - | - | - | - |
| Application | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / End Face / Profiling | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling / Chamfer | Outer Diameter | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Chamfer | End Face | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | - | - | - | Outer Diameter / End Face / Chamfer | - | - | - | - | - |
| Clamp Shape | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Lever lock | Double Clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | - | - | - | Cable clamp | - | - | - | - | - |
| Cutting Direction | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand |
| Applicable Tip Clearance Angle Type | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | Negative | Negative | - | - | Negative | - | - | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | - | - | - | - | - | - | - |
| Shank height(mm) | 16 ～ 25 | 25 ～ 40 | 20 ～ 50 | 20 ～ 25 | 16 ～ 32 | 20 | 32 ～ 40 | 25 ～ 40 | 16 ～ 32 | - | - | - | - | - | - | 40 | 40 | 12 ～ 16 | 10 ～ 16 | 40 | - | 50 | - | - | - | - | - | - | - | - | - | 16 | 12 ～ 16 | 16 | 12 | 8 ～ 16 | - | - | 50 | 40 | - | - | 25 ～ 32 | - | 19 ～ 50 |
| Shank width(mm) | 16 ～ 25 | 25 ～ 40 | 20 ～ 50 | 20 ～ 25 | 16 ～ 32 | 20 | 32 ～ 40 | 25 ～ 40 | 16 ～ 32 | - | - | - | - | - | - | 40 | 40 | 12 ～ 16 | 12 ～ 16 | 25 | - | 40 | - | - | - | - | - | - | - | - | - | 16 | 12 ～ 16 | 16 | 12 | 10 ～ 16 | 40 | 40 | 47 | 40 | - | - | 25 | - | 19 ～ 40 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Cutting Direction
- Right-hand
- Left-hand
- No-hand
-
Applicable Tip Clearance Angle Type
- Negative
- Pozidriv
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Brand
-
- SANDVIK (136)
- KYOCERA (60)
- NGK SPARK PLUG (18)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for O.D. Tuning
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.