SV

Type Code Seach | *NOT READY*: #CODE

Förslag på nyckelord

Förslag på artikelnummer

S
S
S
S

Discontinued Products

SANKO MFG Roughing End Mills (HSS)（Machining Application：Inclined Cuts）

18

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 10 Days or Less 11 Days or Less 15 Days or Less

?* Information on days to ship and prices

1

αFS α Flat Nick Roughing Short Blade

αFS α Flat Nick Roughing Short Blade

SANKO MFG

A flat nick type roughing end mill. Semi-finishing is possible.

Starting from^∗ ：	77.36 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

P-XαS P Coated X α Nick Short Blade

P-XαS P Coated X α Nick Short Blade

SANKO MFG

A semi-fine pitch type roughing end mill. Excellent chip discharge.

Starting from^∗ ：	68.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

P-XαM P Coated X α Nick Regular Blade

P-XαM P Coated X α Nick Regular Blade

SANKO MFG

[Features]
· A semi-fine pitch type P-XαS roughing end mill.
· Excellent chip discharge.
· Enables a wide range of machining applications, due to the regular flute.

Starting from^∗ ：	87.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SSα S Coated Estech α Nick

SSα S Coated Estech α Nick

SANKO MFG

Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.

Starting from^∗ ：	87.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSαM S Coated Estech α Nick Regular Blade

SSαM S Coated Estech α Nick Regular Blade

SANKO MFG

[Features]
· Semi-fine pitch type roughing endmill with TiCN coating.
· Extended periods of machining with hard-to-cut materials are possible.
· Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	104.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSαLS S Coated Estech α Nick Long Shank

SSαLS S Coated Estech α Nick Long Shank

SANKO MFG

Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible. The long shank allows for machining in deep sections.

Starting from^∗ ：	148.58 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-FPαS S-Coated Fine Pitch Short Blade

S-FPαS S-Coated Fine Pitch Short Blade

SANKO MFG

Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.

Starting from^∗ ：	77.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

S-FPαM S-Coated Fine Pitch Regular Blade

S-FPαM S-Coated Fine Pitch Regular Blade

SANKO MFG

[Features]
· Fine pitch type roughing endmill with S coating.
· Machining allowance can be reduced when performing finish machining.
· Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	83.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

S-αS S-Coated Alpha Nick Short Blade

S-αS S-Coated Alpha Nick Short Blade

SANKO MFG

[Features]
· Standard pitch type roughing endmill with TiCN coating.

Starting from^∗ ：	78.70 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-αM S-Coated Alpha Nick Regular Blade

S-αM S-Coated Alpha Nick Regular Blade

SANKO MFG

Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	85.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S- αH S Coating α Nick Hard Type

S- αH S Coating α Nick Hard Type

SANKO MFG

Hard pitch type roughing endmill with TiCN coating. Ideal for heavy duty groove cutting.

Starting from^∗ ：	75.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-αHM S-Coated Alpha Nick Hard Type Regular Blade

S-αHM S-Coated Alpha Nick Hard Type Regular Blade

SANKO MFG

[Features]
· Hard pitch type roughing endmill with S coating.
· Ideal for heavy duty groove cutting.
· Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	82.60 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

αS α Nick Roughing Short Blade

αS α Nick Roughing Short Blade

SANKO MFG

Roughing cutter with normal pitch.
Type of cutting edge
Materials: Hs-Co (cobalt high-speed steel)
Helix angle: 30°
Nick shape: standard pitch-nick.

Starting from^∗ ：	49.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

αM α Nick Roughing Regular Blade

αM α Nick Roughing Regular Blade

SANKO MFG

A standard pitch type roughing end mill. Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	80.53 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

α H α Nick Hard Type

α H α Nick Hard Type

SANKO MFG

A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.

Starting from^∗ ：	47.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

αHM α Nick Roughing Hard Type Regular-Blade Type

αHM α Nick Roughing Hard Type Regular-Blade Type

SANKO MFG

A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. Enables a wide range of machining applications, due to the regular flute length.

Starting from^∗ ：	54.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

αHLS α Nick Roughing Hard Type Long-Shank Type

αHLS α Nick Roughing Hard Type Long-Shank Type

SANKO MFG

A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. The long shank allows for machining in deep sections.

Starting from^∗ ：	156.63 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

S-SUSα Stainless Steel Groove Processing

S-SUSα Stainless Steel Groove Processing

SANKO MFG

[Features]
· A flat nick type roughing end mill.
· Ideal for grooving of stainless steel.

Starting from^∗ ：	49.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank


Brand	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG
Product Series	αFS α Flat Nick Roughing Short Blade	P-XαS P Coated X α Nick Short Blade	P-XαM P Coated X α Nick Regular Blade	SSα S Coated Estech α Nick	SSαM S Coated Estech α Nick Regular Blade	SSαLS S Coated Estech α Nick Long Shank	S-FPαS S-Coated Fine Pitch Short Blade	S-FPαM S-Coated Fine Pitch Regular Blade	S-αS S-Coated Alpha Nick Short Blade	S-αM S-Coated Alpha Nick Regular Blade	S- αH S Coating α Nick Hard Type	S-αHM S-Coated Alpha Nick Hard Type Regular Blade	αS α Nick Roughing Short Blade	αM α Nick Roughing Regular Blade	α H α Nick Hard Type	αHM α Nick Roughing Hard Type Regular-Blade Type	αHLS α Nick Roughing Hard Type Long-Shank Type	S-SUSα Stainless Steel Groove Processing
Starting from^∗	77.36 € *Unit price with basic configuration	68.55 € *Unit price with basic configuration	87.15 € *Unit price with basic configuration	87.75 € *Unit price with basic configuration	104.62 € *Unit price with basic configuration	148.58 € *Unit price with basic configuration	77.23 € *Unit price with basic configuration	83.70 € *Unit price with basic configuration	78.70 € *Unit price with basic configuration	85.15 € *Unit price with basic configuration	75.15 € *Unit price with basic configuration	82.60 € *Unit price with basic configuration	49.83 € *Unit price with basic configuration	80.53 € *Unit price with basic configuration	47.51 € *Unit price with basic configuration	54.59 € *Unit price with basic configuration	156.63 € *Unit price with basic configuration	49.33 € *Unit price with basic configuration
Min. Shipping Days ：	8 Days	6 Days	8 Days	6 Days	6 Days	8 Days	6 Days	7 Days	8 Days	8 Days	8 Days	8 Days	6 Days	8 Days	6 Days	8 Days	8 Days	6 Days
Blade diameter (D)(φ)	10 ～ 50	5 ～ 50	5 ～ 40	5 ～ 40	5 ～ 50	16 ～ 50	5 ～ 50	5 ～ 50	5 ～ 50	10 ～ 50	5 ～ 50	6 ～ 50	5 ～ 60	10 ～ 50	5 ～ 50	6 ～ 50	20 ～ 50	3 ～ 30
Blade length (ℓ)(mm)	25 ～ 80	10 ～ 80	15 ～ 100	10 ～ 65	15 ～ 120	40 ～ 75	10 ～ 80	15 ～ 120	10 ～ 80	35 ～ 120	8 ～ 75	15 ～ 110	10 ～ 95	35 ～ 120	8 ～ 75	15 ～ 110	45 ～ 75	5 ～ 55
work material	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎]
Blade shape type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing
Number of flutes(sheet)	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 4
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Machining Application	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts
Shank diameter (d)(mm)	10 ～ 42	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 42	16 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	6 ～ 42	6 ～ 42	16 ～ 42	6 ～ 25
Coating	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	90 ～ 200	70 ～ 200	80 ～ 220	70 ～ 185	80 ～ 220	180 ～ 320	70 ～ 200	80 ～ 240	70 ～ 200	100 ～ 240	55 ～ 165	60 ～ 200	70 ～ 210	100 ～ 240	55 ～ 165	60 ～ 200	200 ～ 320	55 ～ 165
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...

1

Filter by:

Narrow search by specifying spec./dim.

Blade diameter (D)(φ)
- 3～3.5
  - 3
  - 3.5
- 4～4.5
  - 4
  - 4.5
- 5～5.5
  - 5
  - 5.5
- 6～6.5
  - 6
  - 6.5
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11～11.5
  - 11
  - 11.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15～15.5
  - 15
  - 15.5
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18～18.5
  - 18
  - 18.5
- 19～19.5
  - 19
  - 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 55
- 60
Drawing

Clear

Blade length (ℓ)(mm)
5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

34

35

36

38

40

45

48

50

53

55

56

60

63

65

67

68

70

75

80

90

95

100

105

106

110

112

115

120

122

125

130

140

145

150

160

180

200

212

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
Details

Clear

Blade shape type
- Square
- Roughing
Clear

Number of flutes(sheet)
3

4

5

6

8
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- Alloy HSS
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
Images

Clear

Shank diameter (d)(mm)
6

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 50～57
  - 50
  - 55
  - 56
  - 57
- 60～69
  - 60
  - 63
  - 65
  - 66
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 75
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 86
  - 88
  - 89
- 90～97
  - 90
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 102
  - 104
  - 105
  - 108
- 110～115
  - 110
  - 115
- 120～125
  - 120
  - 121
  - 122
  - 123
  - 125
- 130～135
  - 130
  - 133
  - 135
- 140～145
  - 140
  - 141
  - 143
  - 144
  - 145
- 150～155
  - 150
  - 155
- 160～166
  - 160
  - 165
  - 166
- 170～177
  - 170
  - 175
  - 177
- 180～186
  - 180
  - 185
  - 186
- 190～197
  - 190
  - 195
  - 197
- 200～205
  - 200
  - 205
- 210～215
  - 210
  - 214
  - 215
- 220～227
  - 220
  - 225
  - 227
- 230～235
  - 230
  - 235
- 240
- 250～252
  - 250
  - 252
- 260
- 270
- 280～285
  - 280
  - 285
- 290
- 310～315
  - 310
  - 315
- 320
- 340
- 350
- 370
- 390
- 420
Drawing

Clear

Torsion Angle (θ)
- Weak torsion (15˚ to 25˚)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
Clear

Base Blade Y/N
- Available
- None
Clear

Underneck length (ℓ1)(mm)
44

45

48

50

53

54

56

60

64

65

70

72

75

80

88

90

95

100

112

113
Drawing

Clear

shank
- Straight
Clear

Narrow search by specifying Brand

- MISUMI (25)
- Cost Efficient Products ()
- SANKO MFG (18)
- OSG (5)
- NACHI(FUJIKOSHI) (0)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

Categories related to Roughing End Mills (HSS)

Överst på sidan

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

mobil
dator

Certifikat

MISUMI världen över

Land/region/språk

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.