TAKIGEN For Sealable Type（Page 2）

106

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 6 Days or Less 7 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 14 Days or Less 15 Days or Less 16 Days or Less 24 Days or Less

?* Information on days to ship and prices

Airtight Safety Handle FA-602 for Receiver FA-602S-7

TAKIGEN

[Features]
· Jet cooler can be installed anywhere.
· The level of connectivity of the latch can be adjusted 4 mm back and forth.
· Equipped with safety escape mechanism to prevent trapping accidents and a Safety knob FC-708 for safety that should be used in together.
· Installation is compatible with FA-602S-6.
· The offset adjustment range is 40 to 70 mm

2D / 3D CAD data available

Starting from^∗ ：	36.99 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Sealing Pad Handle FA-802

TAKIGEN

[Features]
· The in-wall safety push bar (FC-802) can be opened from the inside of the cabinet (you can not open the door when locked with a key pin or padlock) and can be locked with a key pin and padlock (C-555), or chief padlock (C-555) (please check inside before locking it). For both left hand and right hand use

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	58.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Interlocking Safety Device FA-622

TAKIGEN

[Features]
· When you press the manual lever, you can open it from inside of the cabinet using the connecting rod set on the interlocking lever.
· It can be opened reliably, even when locked.
· Left and right combination

2D CAD data available

Starting from^∗ ：	14.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Oven Handle FA-682 / 1682

TAKIGEN

[Features]
· The operation of the roller makes it possible to seal the door reliably with a smooth operation feeling (bolting: FA-682-1: 6 mm, FA-682-2: 6.5 mm).
· The resin lever has less heat conduction and is optimal for an industrial oven.
· When the handle turns, you can feel a click at 0° and 60° and it holds the handle.
· For right opening (right turn) and Left opening (left turn)

2D / 3D CAD data available

Starting from^∗ ：	82.03 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Lift Handle FA-681 for Sealing an Oven

TAKIGEN

[Features]
· There is a safety design that creates a gap in the door when you pull the handle toward you which lets steam and hot air escape.
· By pushing the handle lever, the stopper firmly closes the door with a 6 mm stroke.
· Since the receiver is a latch, this is a safety mechanism that does not put a burden on the main body of the oven and the handle, even during improper operation.
· Hold the handle lever rotated 60 degrees to open / close (FA-681-H).
· Push the door lightly to temporarily close it (using FA-681-S-1, FA-681-S-2).
· There is a trigger specification (FA-681-T) It is a lever made of resin which has less thermal conduction.
· For left hand or right hand use (the drawings and photo show right hand use)

2D CAD data available

Starting from^∗ ：	84.78 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Promotional pricing

Cattle Type Planar Handle A-111

TAKIGEN

[Features]
· Ideal for doors which are required to be airtight.
· Waterproof type (O ring used).
· Adjustable screw allows fine adjustment of grip.
· Excellent corrosion resistance.
Easy installation

Volume Discount

2D CAD data available

Starting from^∗ ：	46.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cattle Type Planar Handle A-222

TAKIGEN

[Features]
· Ideal for doors required to be airtight.
· Waterproof type (O ring used).
· Fine adjustment of grip position is possible by adjusting the screw.
· Excellent corrosion resistance.
· Easy installation.
· Coin lock type is also available. (A-222-2)

2D CAD data available

Starting from^∗ ：	80.44 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Side Lift Type with Face and Extension Bolt A-328

TAKIGEN

[Features]
· Easy to install surface attachment type.
· Maintenance is very easy compared with digging type.
· Strong seal with upper and lower rods.
· It is thin with a height of about 45 mm from the mounting surface.
· For left or right opening use

2D CAD data available

Starting from^∗ ：	75.37 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Stainless Steel L Type Inner Handle A-1394-H

TAKIGEN

[Features] Ambidextrous. [Features] as an inside handle.

2D CAD data available

Starting from^∗ ：	121.97 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Stainless Steel Corner Handle FA-1709

TAKIGEN

[Features]
· The connecting arm ensures a simple, one touch, balanced design in which one must only tug slightly.
· Compact design with small mounting space.
· Excellent salt and acid resistance, ideal for harsh environmental conditions.
· For both left hand and right hand use.
· Can be locked with a padlock.
· Automatic closing can be done in combination with a raised hinge

2D / 3D CAD data available

Starting from^∗ ：	80.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel Container Handle FA-1825N

TAKIGEN

2D / 3D CAD data available

Starting from^∗ ：	273.74 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Promotional pricing

Container Handle FA-810

TAKIGEN

[Features]
· Dual shared type

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	76.10 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel Hatch Lock A-1288

TAKIGEN

[Features]
· Made of stainless steel, with excellent corrosion resistance.
· The stopper lifts vertically by rotation of the handle and seals the door.
· It is a waterproof sealed type.
· Waterproof standard IPX3 equivalent

Starting from^∗ ：	213.04 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Seal Handle with Stainless Steel Lock FA-1926

TAKIGEN

[Features]
· It is a handle with a locking mechanism that will not open from vibration, shock, etc.
· Key pin of ø6 is attached.
· Heads of padlocks (C-555) Can be used together.
· Rigid structure

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	102.34 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel Flat Lift Handle A-1204-3

TAKIGEN

2D CAD data available

Starting from^∗ ：	105.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel Flat Lift Handle A-1205

TAKIGEN

2D CAD data available

Starting from^∗ ：	104.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flat Lift Handle A-234

TAKIGEN

[Features]
· This is a thin type with a protrusion of 4 mm and a depth of 25 mm from the panel mounting surface.
· You can feel a click when you pull up and rotate the handle so you can perform reliable operation.
· The stopper is lifted 3 mm by storing the handle.
· You can get sealing effects.
· The special locking mechanism can eliminate the conventional anxiety factors (rattling of the stopper, vibration of the rod and the rod falling from its own weight), ensuring secure locking.
· For opening to the right

2D / 3D CAD data available

Starting from^∗ ：	65.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flat Waterproof Lift Handle A-212

TAKIGEN

[Features]
· The stopper is lifted 3 to 5 mm by storing handle.
· You can get sealing effects.
· This is a simple structure in which you can lift the handle with your fingers.
· Waterproof type (using O ring and sheet packing).
· For both left hand and right hand use

2D / 3D CAD data available

Starting from^∗ ：	34.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Latch Handle FA-680

TAKIGEN

[Features]
· Two stage opening and closing is possible in combination with the double latch lock C-628, which is a safety feature to release hot air and steam such as with an oven.
· In combination with the latch lock, it can be opened and closed with one touch of the upper and lower two points of tightening.
· The large handle made of resin provides less heat conduction.
· It is an elegant, rounded design

2D CAD data available

Starting from^∗ ：	84.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Lift Handle A-201-A

TAKIGEN

[Features]
· Handle shape that is easy to operate, the handle tightens the door.
· The stopper can be adjusted within the range of 8 mm (A-201-A) A-1/A-2/A-3 Each stopper is compatible and can be attached to any handle.
· A-1 Please attach the stopper to use it.
· The stopper can be installed in 90° increments.
· For both left hand and right hand use.

2D / 3D CAD data available

Starting from^∗ ：	23.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lift Handle A-202

TAKIGEN

[Features]
· Seal the door by pushing down on the handle.
· When pulling up on the handle, the clasp retracts and it can be opened and closed by rotating the handle.
· Left and right combination

2D / 3D CAD data available

Starting from^∗ ：	15.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lift Handle AP-201

TAKIGEN

[Features]
· Handle shape that is easy to operate.
· Tighten the door by pushing down on the handle.
· The stopper can be installed in 90° increments.
· Left and right dual use type.

2D / 3D CAD data available

Starting from^∗ ：	17.43 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Lever Handle FA-601-F-H

TAKIGEN

[Features]
· Even when locked, there is a special lever handle FA-601-F-H that's operation is a safety mechanism that can be open the door(FA-601-F-H sold separately).
· For both left hand and right hand use

2D CAD data available

Starting from^∗ ：	73.19 €
Min. Shipping Days ：	56 Days

*Unit price with basic configuration

Promotional pricing

Roller Tightening Handle FA-840

TAKIGEN

[Features]
· Close even a large door securely.
· The mounting position of the plates (FA-840S-1) can be fine-tuned.
· The opening operation is smooth with a built-in spring in the handle.
· For right or left (they both open to the left in this figure).
· The plate is a left-and-right type

2D / 3D CAD data available

Starting from^∗ ：	17.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Lock Handle FA-630

TAKIGEN

[Features]
· The rod moves up and down 23 mm vertically and closes the door firmly.
· You can identify whether it is locked (green) or unlocked (red).
· The direction of handle operation has been clarified with arrows.
· The rod mounting position can be adjusted.
· For right rotation or for left rotation (the photograph in this figure shows right rotation)

2D CAD data available

Starting from^∗ ：	99.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Seal with Lock FA-926

TAKIGEN

2D CAD data available

Starting from^∗ ：	103.61 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Seal with Lock FA-927

TAKIGEN

[Features]
· It is a handle with a locking mechanism that does not open from vibration, impact, etc.
· Can be used together with Key pin and padlock, Chief padlock (C-555).
· Rigid structure

2D CAD data available

Starting from^∗ ：	57.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

One Touch Corner Handle FA-935

TAKIGEN

[Features]
· When you pull the button, the lock is released and you can open it.
· The plates position is adjustable during installation and the tightening margin can be adjusted

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	73.81 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Small Extended Bolt Lock A-363

TAKIGEN

[Features]
· Low cost extended bolt lock.
· Since they are front faced, installation and maintenance are easy.
· Waterproof for right/left

2D / 3D CAD data available

Starting from^∗ ：	54.37 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Small Handle Plate FA-727S

TAKIGEN

The height can be adjusted with the plate screws.

2D / 3D CAD data available

Starting from^∗ ：	13.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Large Faceted Lock Handle A-388N

TAKIGEN

[Features]
· Please apply high-performance lubricant C-985 to ensure long-term use.
· We recommend the application of a "Loosening prevention agent" on the screws for the stopper plate of this product in order to prevent looseness.
· Please be aware that rotating the key more than necessary may damage the lock/key tip

2D CAD data available

Starting from^∗ ：	106.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Canopy Sealing Handle FA-908

TAKIGEN

[Features]
· It is the best front facing handles for canopy type sealing doors.
· A high Security lock TAK70 is standard equipment.
· You can also rearrange it into TAK60/TAK80.
· Extruded material is used for the grip part, and elongated items can also be produced (standard is 230 mm)

2D CAD data available

Starting from^∗ ：	99.71 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Two-Stage Corner Handle FA-635

TAKIGEN

[Features]
· Once the lever is pulled, the door opens about 12 mm and then fully opens by pulling the lever again.
· It is ideal for when you need to escape steam.
· Heat resistant type with vinyl coating on the hand grip (up to 100° C).
· It is possible to finely adjust the mounting position.
· For both left hand and right hand use

2D CAD data available

Starting from^∗ ：	142.20 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Equipped with an Escape Device Plate FA-702S-4

TAKIGEN

[Features]
· A double safety escape mechanism that adopts a safety device, not only for the handle, but also for the plate to prevent trapping accidents.
· When you push the internal safety push rod strongly in case of emergency, the plate separates from the latch and the door opens when you push on it

2D CAD data available

Starting from^∗ ：	73.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flat Lift Handle A-205

TAKIGEN

[Features]
· Seal the door by pushing down on the handle.
· When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
· Left and right dual use type.
· Improved waterproofness. (Packing used in and outside)

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	22.97 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat Lift Handle A-214

TAKIGEN

Starting from^∗ ：	62.32 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sealed Lift Handle Latch Receiving FA-681-S

TAKIGEN

[Features]
· FA-681-1 / FA-681-T-1 You can close it with a single touch by using it in combination with a handle.
· FA-681-S-1 is an indented type.
· The latch is inconspicuous, and adjustment of up to 6 mm is possible.
· FA-681-S-2 is a front facing type.
· Easy installation and maintenance, adjustment of up to 10 mm is possible

2D CAD data available

Starting from^∗ ：	28.29 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Closed Adjustable Handle A-309

TAKIGEN

[Features]
· Flat design without protrusions.
· One touch open with push button.
· The airtightness of the door can be finely adjusted with the adjusting screw.
· Waterproof type (O ring, packing is used).
· Lockable with reversible key with dust proof shutter

2D CAD data available

Starting from^∗ ：	46.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sealed Cover Lock A-838

TAKIGEN

[Features]
· Increases the shielding ability of the hook part, and minimizes sound leakage.
· Flat type with few protrusions from the door surface.
· You can tighten three points in combination with the interlocking unit.
· A lock with a dust-proof shutter comes standard.
· You can use it as an alternative to A-858 which is a cover lock for construction machine that is a product discontinued in the catalog

2D / 3D CAD data available

Starting from^∗ ：	13.82 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Sealed Small Cover Lock A-839

TAKIGEN

[Features]
· Improved the shielding property of the hook.
· Keeps sound leakage to a minimum.
· Flat type with few protrusions from the door surface.
· Dust proof shutter lock included as standard

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	32.63 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Sealing Corner Handle FA-611

TAKIGEN

[Features]
· It is a side-mounted type sealed handle.
· The semicircular claw meshes with the roller seat to draw-in and tightly close the door.
· the roller seat can be adjusted 2 mm forward and backward from the reference position for tightening.
· In addition to the included key, it is possible to lock with a padlock (recommended padlock C-551).
· Left and right combination

2D / 3D CAD data available

Starting from^∗ ：	13.82 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Sealing Corner Handle FA-614

TAKIGEN

[Features]
· It is the most common, economic type.
· The mounting position and tightening margin of the plate can be finely adjusted.
· Can be used in high temperatures such as with an oven.
· Left and right combination

2D CAD data available

Starting from^∗ ：	71.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sealing Corner Handle FA-615

TAKIGEN

[Features]
· Heat-resistant type (up to 100°C) with a vinyl coating on the hand grip.
· Can be used in high temperatures, such as with an oven

2D / 3D CAD data available

Starting from^∗ ：	122.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Sealing Corner Handle FA-618

TAKIGEN

Lockable with padlock. Tightening margin adjustment is possible for the plate. Left and right dual use type.

Volume Discount

2D CAD data available

Starting from^∗ ：	56.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Sealing Corner Handle FA-620

TAKIGEN

2D CAD data available

Starting from^∗ ：	81.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：

						Promotional pricing						Promotional pricing							Promotional pricing					Promotional pricing				Promotional pricing																Promotional pricing
Brand	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN
Product Series	Airtight Safety Handle FA-602 for Receiver FA-602S-7	Sealing Pad Handle FA-802	Interlocking Safety Device FA-622	Oven Handle FA-682 / 1682	Lift Handle FA-681 for Sealing an Oven	Cattle Type Planar Handle A-111	Cattle Type Planar Handle A-222	Side Lift Type with Face and Extension Bolt A-328	Stainless Steel L Type Inner Handle A-1394-H	Stainless Steel Corner Handle FA-1709	Stainless Steel Container Handle FA-1825N	Container Handle FA-810	Stainless Steel Hatch Lock A-1288	Seal Handle with Stainless Steel Lock FA-1926	Stainless Steel Flat Lift Handle A-1204-3	Stainless Steel Flat Lift Handle A-1205	Flat Lift Handle A-234	Flat Waterproof Lift Handle A-212	Latch Handle FA-680	Lift Handle A-201-A	Lift Handle A-202	Lift Handle AP-201	Lever Handle FA-601-F-H	Roller Tightening Handle FA-840	Lock Handle FA-630	Seal with Lock FA-926	Seal with Lock FA-927	One Touch Corner Handle FA-935	Small Extended Bolt Lock A-363	Small Handle Plate FA-727S	Large Faceted Lock Handle A-388N	Canopy Sealing Handle FA-908	Two-Stage Corner Handle FA-635	Equipped with an Escape Device Plate FA-702S-4	Flat Lift Handle A-205	Flat Lift Handle A-214	Sealed Lift Handle Latch Receiving FA-681-S	Closed Adjustable Handle A-309	Sealed Cover Lock A-838	Sealed Small Cover Lock A-839	Sealing Corner Handle FA-611	Sealing Corner Handle FA-614	Sealing Corner Handle FA-615	Sealing Corner Handle FA-618	Sealing Corner Handle FA-620
CAD	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D	2D	2D	2D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D	2D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D	2D	2D / 3D	2D / 3D	2D / 3D	2D	2D	2D	2D	2D / 3D		2D	2D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D
Starting from^∗	36.99 € *Unit price with basic configuration	58.71 € *Unit price with basic configuration Volume Discount	14.10 € *Unit price with basic configuration	82.03 € *Unit price with basic configuration	84.78 € *Unit price with basic configuration	46.03 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	80.44 € *Unit price with basic configuration	75.37 € *Unit price with basic configuration	121.97 € *Unit price with basic configuration	80.44 € *Unit price with basic configuration	273.74 € *Unit price with basic configuration	76.10 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	213.04 € *Unit price with basic configuration	102.34 € *Unit price with basic configuration Volume Discount	105.77 € *Unit price with basic configuration	104.76 € *Unit price with basic configuration	65.23 € *Unit price with basic configuration	34.81 € *Unit price with basic configuration	84.78 € Special price *Unit price with basic configuration Promotional pricing	23.95 € *Unit price with basic configuration	15.98 € *Unit price with basic configuration	17.43 € *Unit price with basic configuration	73.19 € *Unit price with basic configuration	17.88 € Special price *Unit price with basic configuration Promotional pricing	99.27 € *Unit price with basic configuration	103.61 € *Unit price with basic configuration	57.98 € *Unit price with basic configuration	73.81 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	54.37 € *Unit price with basic configuration	13.38 € *Unit price with basic configuration	106.78 € *Unit price with basic configuration	99.71 € *Unit price with basic configuration	142.20 € *Unit price with basic configuration	73.19 € *Unit price with basic configuration	22.97 € *Unit price with basic configuration Volume Discount	62.32 € *Unit price with basic configuration	28.29 € *Unit price with basic configuration	46.41 € *Unit price with basic configuration	13.82 € *Unit price with basic configuration	32.63 € *Unit price with basic configuration Volume Discount	13.82 € *Unit price with basic configuration	71.74 € *Unit price with basic configuration	122.44 € *Unit price with basic configuration	56.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	81.89 € *Unit price with basic configuration
Min. Shipping Days ：	10 Days	6 Days	6 Days	10 Days	10 Days	Same day	10 Days	10 Days	10 Days	6 Days	10 Days	Same day	10 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	10 Days	56 Days	Same day	6 Days	10 Days	6 Days	Same day	10 Days	6 Days	6 Days	10 Days	10 Days	6 Days	Same day	6 Days	10 Days	6 Days	10 Days	10 Days	10 Days	6 Days	6 Days	Same day	6 Days