TIGERS POLYMER Resin Hoses（Hose Material：Vinyl Chloride）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Crystal Hose, F-3 Type
TIGERS POLYMER
Lightweight, with flat and smooth inner/outer surfaces. Suitable for both delivery and suction.
[Features]
- The soft part is transparent, letting you see the contents.
- Lightweight and bendable for easy handling.
· Suitable for both suction and delivery.Min. Shipping Days ： 10 Days -
Crystal Hose WT Type
TIGERS POLYMER
· Transparent with excellent flexibility. Well suited for suction use.
[Features]
· For water intake and drainage applications in agriculture, civil engineering work, etc.
· Since the outer surface is corrugated, flexibility is excellent.
･ Contents can be checked due to transparency.
· Well suited for suction useMin. Shipping Days ： 10 Days -
Tie Power Hose WS Type
TIGERS POLYMER
WT pressure resistant type. Lightweight with excellent flexibility.
[Features]
· For water intake and drainage performed in civil engineering work, etc.
· WT pressure resistant type.
· A reinforcing cord is included, conferring excellent pressure resistance.
· Lightweight and flexible.
· Well suited for delivery and suction use.
· WS type is right handedMin. Shipping Days ： 10 Days -
Thailand Power Hose WR-Type
TIGERS POLYMER
Maximum allowable pressure resistance of 1.0 MPa (10.2 kgf/cm2). (φ 300 is 0.50 Mpa) It boasts superior wear resistance thanks to special materials in its inner layer.
[Features]
▪ Maximum allowable pressure 1.0 Mpa {10.2 kgf/cm2}:It has excellent pressure resistance (with outer tube caulking/inner tube expansion fittings).
・Special enter layer materials provided with excellent abrasion resistance.
▪ Its ability to be lengthened can streamline piping work.Min. Shipping Days ： 10 Days -
Ti-Power Hose, FC-Type (Mortar Hose)
TIGERS POLYMER
With little expansion under pressurization, this hose has superior pressure-resistant performance. It has excellent abrasion resistance. Use of an inner cylinder expansion fitting smooths the inner surface, to smooth out the fluid flow.Min. Shipping Days ： 10 Days -
Crystal Hose, Static Electricity W Type
TIGERS POLYMER
Anti-static crystal hose WT type. Hose for transporting powder and granuals
[Features]
· Excellent anti-static effect from use of antistatic mixed PVC.
･ Soft portion is transparent, allowing confirmation of contentsMin. Shipping Days ： 10 Days -
Crystal Hose E Type
TIGERS POLYMER
Smooth inner and outer surfaces, with grounding wire. Hose for Transporting Powder and Granules
[Features]
· Contains grounding wire, so an excellent antistatic effect is also conferred.
･ Contents can be checked since it is transparent.
· Suitable for delivery.Min. Shipping Days ： 10 Days -
Hinet Holes
TIGERS POLYMER
[Features]
・ The excellent transparency makes it easy to check the fluid.
・ The warp thread is inserted to suppress the elongation during pressurization.
・ It has excellent cold resistance, heat resistance, and chemical resistance.
[Applications]
・ For water supply and drainage of equipment.
・ For pneumatic, air conditioner piping and drainage.
・ For cleaning ships, vehicles, etc.
・ For transporting powders and liquid chemicals.
・ Sprayer.
・ For civil engineering and construction work piping.Min. Shipping Days ： 10 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Fluid / Usage |
| Cutting Service Usage |
| Nominal I.D. d |
| O.D. D(mm) |
| Properties |
| Hose Material |
| Mounting Metal Fittings |
| Color |
|
|
|
|
|
|
|
| |
| Brand | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER |
| Product Series | ||||||||
| Starting from∗ | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days | 10 Days |
| Applicable Fluid / Usage | Water | Water | Water | Water | Cement | Powder | Powder | Water / Chemical / Powder / Air |
| Cutting Service Usage | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Nominal I.D. d | 19 ～ 200 | 25 ～ 200 | 25 ～ 200 | 38 ～ 200 | 50 | 25 ～ 75 | 50 | 4 ～ 50 |
| O.D. D(mm) | 24.5 ～ 221.5 | 31.6 ～ 229.7 | 34.4 ～ 235 | 52.3 ～ 245 | 65 | 31.8 ～ 90 | 61 | 9 ～ 62 |
| Properties | Standard / Transparency / Flexibility / Vacuum | Standard / Transparency / Flexibility / Vacuum | Standard / Pressure Resistance / Flexibility / Vacuum | Abrasion Resistance / Pressure Resistance | Abrasion Resistance / Pressure Resistance | Antistatic Performance / Transparency | Antistatic Performance / Transparency | Heat Resistance / Low Temp. Resistance / Chemical Resistance / Transparency |
| Hose Material | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride |
| Mounting Metal Fittings | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Color | Transparent (including non-white colors) | Transparent (including non-white colors) | Rose | Orange | Gray | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Fluid / Usage
- Water
- Chemical
- Powder
- Air
- Special factory requirements
- Oil (Mineral Oil)
- Ink, Paint
- Solvent
- Cement
- Grains
- Steam
- Oxygen
- Acethylene
- Carbon Dioxide
- Argon
- Nitrogen
- Gas
- Agrichemical
-
Cutting Service Usage
- Yes
- No
-
Nominal I.D. d
-
O.D. D(mm)
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 10.5
- 10.6
- 11
- 11.7
- 11.7/11.7
- 12
- 12.3
- 12.5
- 13
- 13.5
- 14
- 14.3
- 14.5
- 14.5/16.0
- 15
- 16
- 16.5
- 17
- 18
- 19
- 19.5
- 20
- 20.1
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.7
- 25
- 25.6
- 26
- 27
- 27.5
- 28
- 28.2
- 28.5
- 29
- 29.9
- 30
- 30.4
- 30.8
- 30.9
- 31
- 31.2
- 31.5
- 31.6
- 31.8
- 32
- 32.6
- 32.9
- 33
- 33.4
- 33.5
- 33.7
- 33.8
- 34
- 34.2
- 34.4
- 34.5
- 34.9
- 35.5
- 35.6
- 36
- 36.5
- 36.7
- 37
- 37.4
- 37.6
- 38
- 38.2
- 39
- 39.2
- 39.3
- 39.8
- 40
- 40.2
- 40.5
- 40.8
- 41
- 41.5
- 41.6
- 41.8
- 42
- 42.5
- 43
- 43.2
- 43.5
- 43.8
- 43.9
- 44
- 44.4
- 44.6
- 45.5
- 45.8
- 46
- 46.2
- 46.4
- 46.5
- 46.6
- 47.0
- 47.2
- 47.5
- 47.6
- 47.8
- 48
- 48.4
- 48.5
- 48.7
- 48.8
- 49.5
- 50
- 50.1
- 50.5
- 50.7
- 51
- 52
- 52.3
- 53
- 55
- 56
- 57.0
- 57.5
- 58
- 58.2
- 58.5
- 58.6
- 59.5
- 59.7
- 59.8
- 60
- 60.2
- 60.5
- 60.9
- 61
- 61.4
- 61.6
- 62
- 62.6
- 62.8
- 63
- 63.4
- 63.5
- 64.5
- 65
- 65.2
- 66.0
- 66.8
- 68
- 69.3
- 69.5
- 69.7
- 70
- 71.0
- 71.5
- 72
- 72.1
- 72.2
- 72.4
- 72.6
- 73
- 73.6
- 73.9
- 74
- 74.1
- 74.6
- 74.8
- 75
- 75.1
- 76.0
- 76.5
- 76.8
- 77
- 78
- 78.5
- 78.9
- 80
- 80.5
- 81.5
- 84
- 84.8
- 85.1
- 86
- 86.3
- 86.6
- 87.0
- 87.5
- 87.6
- 88.0
- 88.8
- 89
- 89.1
- 89.6
- 89.8
- 90
- 90.2
- 90.8
- 91
- 91.4
- 92
- 93.3
- 95.5
- 99.1
- 99.5
- 99.7
- 100.5
- 101
- 102.0
- 102.8
- 104
- 104.2
- 104.3
- 105.2
- 106.0
- 107
- 108
- 111.6
- 112.0
- 112.3
- 112.6
- 113
- 114
- 115
- 115.2
- 115.8
- 117
- 117.2
- 117.6
- 118
- 118.4
- 118.6
- 119
- 119.5
- 120
- 120.5
- 128
- 129
- 131.8
- 137.9
- 139.5
- 140
- 140.6
- 141.6
- 143
- 143.6
- 144.8
- 146.8
- 148
- 151
- 152
- 152.2
- 152.5
- 159.5
- 167.5
- 168.0
- 169.4
- 169.8
- 171.0
- 172.0
- 173
- 173.6
- 174.7
- 180
- 180.5
- 183.5
- 184.5
- 197.8
- 221.5
- 223.4
- 223.8
- 226.4
- 226.5
- 229.7
- 230
- 233.5
- 235
- 237
- 238.0
- 245
- 274
- 286.0
- 295.0
- 328.5
- 347.0
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Weather Resistance
- Pressure Resistance
- Heat Resistance
- Low Temp. Resistance
- Oil Resistance
- Chemical Resistance
- Low Release
- Non-adhesive
- Transparency
- Flexibility
- Low Odor
- Condensation Prevention
- Shape Retention
- High Strength
- Vacuum
- Bending Property
- Other Properties
-
Hose Material
- Polyurethane
- Vinyl Chloride
- Silicon Rubber
- Fluororesin
- Olefinic Resin
- Polyolefinic Resin + Styrene Resin
- Others
- Elastomer
- Ethylene Propylene Rubber
- Nylon
-
Mounting Metal Fittings
-
Color
- White
- Milky White
- Transparent (including non-white colors)
- Red
- Blue
- Green
- Rose
- Black
- Gray
- Ivory
- Orange
- Yellowish Opaque White
- Pink
- Brown
- 2-Color
- Yellow
Narrow search by specifying Brand
-
- MISUMI (4)
- TOYOX (12)
- KURARAYPLASTICS (11)
- PLAS-TECH (11)
- TOGAWA INDUSTRY (9)
- TIGERS POLYMER (8)
- KANAFLEX CORPORATION (4)
- HAKKO (1)
- SANYO KASEI (1)
- TRUSCO NAKAYAMA (1)
- ESCO (0)
- PREVOST (0)
- SHINSUNG (0)
- NORELEM (0)
- CHIYODA TSUSHO (0)
- TRU COMPONENTS (0)
- TOTAKU INDUSTRIES (0)
- HELLERMANN TYTON (0)
- DSG CANUSA (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Resin Hoses
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.