Linear Rail Guides / Profile Rail Guides（Material：Stainless Steel）

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Miniature profiled rail guides

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Volume Discount
  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  	Special price
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / wide rail / material selectable

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / long carriage / material selectable

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS

  THK

  A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Miniature profiled rail guides / short carriage / material selectable

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / material selectable / pin holes

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / wide rail / long carriage / material selectable

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / long carriage / high precision / material selectable

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / wide rail / material selectable / pin bore

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / wide rail / large carriage / material selectable

  MISUMI

  Wide Block Type of MISUMI original specifications. Larger screw size has enhanced fastening strength compared to standard products.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / carriage dimensions selectable / stainless steel

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Profile rail guideways / carriage dimensions selectable / material selectable / SR

  THK

  A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
  · The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
  · It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
  · LM block, LM rail, and LM rail are all compatible with stainless steel.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Profile rail guideways / carriage dimensions selectable / material selectable / HSR

  THK

  A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Miniature profiled rail guides / wide carriage / material selectable

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Profile rail guideways / stainless steel

  MISUMI

  Silent type with resin retainersFeatures resin retainers between the steel balls to prevent the balls from coming into contact with each other, thereby helping minimize noise during high-speed operation.
  For the type with resin retainers, blocks and rails can be purchased separately.
  * Blocks and rails cannot be purchased separately for MISUMI Linear Guides other than those with resin retainers.MISUMI Linear Guide Related PagesProduct LineupFAQ (FAQ)Same Day Shipping Product Lubrication Unit MXRelated Components

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS-G

  THK

  A full-ball type with not ball retainer on the SRS type.
  
  [Features]
  · The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
  · The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
  · The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
  · The LM block and LM rail both use stainless steel that are highly rust-proof.
  · The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
  · This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	19 Days

• 

  Miniature profiled rail guides / long carriage / material selectable / pin bore

  MISUMI

  MISUMI original specifications with dowel holes. Requires less time for assembly and has better repeatability.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Minature ball runner block / Stainless steel / R0442 / R0443

  BOSCH REXROTH

  The miniature version of the ball rail system has been developedspecifically for the precision engineering sector, i.e. for the production ofoptical or electronic data processing devices, where rolling-element linearmotion guideways of extremely compact dimensions and high loadcapacity are required.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.76 €
  Min. Shipping Days ：	70 Days

  *Unit price with basic configuration

• 

  Profile rail guideways / long carriage / stainless steel / heavy-duty version

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Profile rail guideways / wide rail / wide carriage / material selectable / SHW

  THK

  A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
  · The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
  · Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
  · The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / stainless steel / RSR

  THK

  A miniature type with a compact structure. Can be mounted in space saving areas.
  
  [Features]
  · RSR/RSR-W type circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with two rows that have been precision ground into the LM block and LM rail.
  · The ball circulates and moves in the compact structure, which allows it to move on an infinite straight line with no restrictions on stroke.
  · The LM block has been designed into a shape that allows for rigidity to be obtained when there is limited space, and is combined with a large diameter ball in order to obtain high rigidity in all directions.
  · Ultra compact: A compact linear system that is highly reliable because there is no mis
  alignment in the cages that are prone to problems in the ball sliding limited stroke type or in the cross roller guide.
  Can withstand load in all directions: Incurs load in all directions, and can adequately use a single shaft guide for small moment loads.
  · In particular, the RSR-W type that has an increased number of effective balls to increase the LM rail width to achieve increased rigidity against moments, and two parallel linear brush shafts can be used to achieve a linear motion with excellent durability and a compact size.
  · Stainless steel LM block, LM rail, and LM rail are all compatible with stainless steel.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	28 Days

• 

  Miniature profiled rail guides / large carriage / material selectable

  MISUMI

  Wide Block Type of MISUMI original specifications. Larger screw size has enhanced fastening strength compared to standard products.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Linear Way L LWL (F) Series

  IKO

  This simple structure which has two rows and four contact points and the unique sizing technology is what led to the creation of this ultra small sized linear guiding device.
  
  [Features]
  · If you are looking for a simple structure, then try this ultra small size (smallest sized LWL1 has a truck rail of just 1 mm)
  · Wide variation that responds to needs
  · A ball retaining type that is easy to assemble
  · Made from a stainless steel that is highly corrosion-resistant
  · Compatible with a wide variety of application in special environments
  

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Miniature profiled rail guides / wide rail / wide carriage / material selectable

  MISUMI

  Wide Block Type of MISUMI original specifications. Larger screw size has enhanced fastening strength compared to standard products.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / short carriage / material selectable / pin hole

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Linear guideway carriages / large carriage, carriage dimensions selectable / material selectable / recirculating ball bearing / HSR

  THK

  An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	170.45 €
  Min. Shipping Days ：	19 Days

  *Unit price with basic configuration

• 

  Linear guideway carriages / carriage dimensions selectable / material selectable / recirculating ball / SR

  THK

  An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled
  · in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	98.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Profile rail guideways / wide rail / wide carriage / material selectable / HRW

  THK

  A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
  There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Profile rail guideways / carriage dimensions selectable / precision / material selectable / SSR

  THK

  Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  C-Lube Linear Way L ML (F) Series

  IKO

  This simple structure which has two rows and four contact points and the unique sizing technology is what led to the creation of this ultra small sized linear guiding device.
  
  [Features]
  · If you are looking for a simple structure, then try this ultra small size (smallest sized LWL1 has a truck rail of just 1 mm)
  · Wide variation that responds to needs
  · A ball retaining type that is easy to assemble
  · Made from a stainless steel that is highly corrosion-resistant
  · Compatible with a wide variety of application in special environments
  

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Miniature profiled rail guides / rail design selectable / carriage dimensions selectable / material selectable / LTBC coating

  MISUMI

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  Miniature profiled rail guides / rail design selectable / material selectable

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Linear guideway carriages / wide carriage, carriage dimensions selectable / material selectable / recirculating ball bearing / HRW

  THK

  An individual block from the THK LM guide HRW series. Extremely useful for sudden design changes and when performing maintenance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	194.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Profile rail guideways / carriage dimensions selectable / stainless steel / medium, heavy-duty design / pin drilling

  MISUMI

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guides / wide rail / long carriage / material selectable / pin hole

  MISUMI

  MISUMI is getting quicker - Our average delivery time has been reduced to 5 days.

  • Lead Time Reduction

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Miniature profiled rail guidess / carriage dimensions selectable / stainless steel / EGM, EGM-L

  OZAK

  [Features]
  · All of the parts are comprised of either stainless steel or plastic, which makes this ideal for use in environments that do not tolerate rust.
  · Can achieve reduced weight and the most compact design allowable, which is ideal for high speed operation.
  · The ball rolling surface has been designed into a gothic arch shape that can withstand a high load capacity, which can sustain a long life.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	16 Days

• 

  Full-Ball Type LM Guide, Radial Type, SR Type

  THK

  [Features]
  ·A compact type with a low cross-sectional height, ideal for horizontal guides due to the ball contact structure that is resistant to loads in the radial direction
  ·Since it is an automatic adjustment type that can absorb the parallelism of the 2 axes and the accuracy error of the level reasonably, high precision and smooth movement can be obtained
  ·The return part of each ball row is designed so that balls circulate smoothly by the guide part of the end plate, so a rolling motion with a small sound can be obtained
  ·Even with respect to preload and eccentric load, the differential slip of the ball is small, it has excellent abrasion resistance, and it is possible to maintain accuracy for a long period of time
  ·LM blocks, LM rails, and balls can be handled with stainless steel
  ·Even if the LM block is pulled out from the LM rail, the ball is held by the holding plate and will not fall off

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Profile rail guideways / high, long carriage / stainless steel / extremely heavy-duty version

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Linear guideway carriages / carriage dimensions selectable / material selectable / SSR

  THK

  An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
  · , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	74.70 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  All Ball LM Guide, World Standard, HSR-M1 Type for High Temperature

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
  · The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
  · Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
  · A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
  · The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
  · Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	54 Days

• 

  LM guide with Ball retainer - Limited stroke EPF type

  THK

  A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	24 Days

• 

  Ball LM guide, radial type, SR-M1 type

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	39 Days

• 

  Ball retainer with LM guide Miniature SRS shape

  THK

  A best selling THK product. The SRS series is designed for installation to locations in which space is at a premium.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Profile rails / wide rail, rail dimensions selectable / material selectable / HRW

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HRW12 and 14LR types) each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) where there is action on the M block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	167.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Miniature profiled rail guides / wide rail / EGM-W, EGM-WL

  OZAK

  [Features]
  · All of the parts are comprised of either stainless steel or plastic, which makes this ideal for use in environments that do not tolerate rust.
  · Can achieve reduced weight and the most compact design allowable, which is ideal for high speed operation.
  · The ball rolling surface has been designed into a gothic arch shape that can withstand a high load capacity, which can sustain a long life.
  · Can achieve simplified maintenance by adding an oil hole to both sides of the bearing carriage. We recommend regularly replenishing the grease.

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	16 Days

Loading...