Cable Carriers（Page 3）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
E2 Mini - One-Piece E-chains®, Non-openable, 11.031 Series
IGUS
E2 mini are small one- or two-piece e-chains®, recommended for highly dynamic applications. igus® also offers a range of accessories and fixation options. Upgrades to openable versions are available for many types. Different types are interchangeable and can also serve as replacements.
[Features]
- If a small, but extremely strong e-chain® is required
- Quiet operation due to small pitch
- For highly dynamic applications
- Variety of options - E2 mini as non-openable or openable along the inner or outer radiusConfigure nowMin. Shipping Days ： 6 Days -
E2 Mini - One-Piece E-chains®, Non-openable, With Moulded-in Vertical Separation, 11.080 Series
IGUS
E2 mini are small one- or two-piece e-chains®, recommended for highly dynamic applications. igus® also offers a range of accessories and fixation options. Upgrades to openable versions are available for many types. Different types are interchangeable and can also serve as replacements.
[Features]
- If a small, but extremely strong e-chain® is required
- Quiet operation due to small pitch
- For highly dynamic applications
- Variety of options - E2 mini as non-openable or openable along the inner or outer radiusConfigure nowMin. Shipping Days ： 6 Days -
E-chains® With Crossbars Every Link, E4/Light, 14550 Series
IGUS
Weight reduction, a larger interior space and a reduced price. The characteristics of the E4/light system: thinner side links (for all types) and a thinner crossbar (for some types: 14240, 14340). E4/light e-chains® represent solutions with an optimum price/performance ratio for many applications. Especially for short travels, hanging and small standing applications. E4/ light types are often first choice.
[Features]
- Large inner heights combined with low weight
- E4/light e-chains® offer optimum price and performance solutions for many applications
- Especially suitable for short travel distances, hanging and standing designsConfigure nowMin. Shipping Days ： 6 Days -
E-chains® With Crossbars Every 2nd Link, E4/Light, 14650 Series
IGUS
Weight reduction, a larger interior space and a reduced price. The characteristics of the E4/light system: thinner side links (for all types) and a thinner crossbar (for some types: 14240, 14340). E4/light e-chains® represent solutions with an optimum price/performance ratio for many applications. Especially for short travels, hanging and small standing applications. E4/ light types are often first choice.
[Features]
- Large inner heights combined with low weight
- E4/light e-chains® offer optimum price and performance solutions for many applications
- Especially suitable for short travel distances, hanging and standing designsConfigure nowMin. Shipping Days ： 6 Days -
E-chains® With Crossbars Every 2nd Link, E4/Light, 15150 Series
IGUS
Weight reduction, a larger interior space and a reduced price. The characteristics of the E4/light system: thinner side links (for all types) and a thinner crossbar (for some types: 14240, 14340). E4/light e-chains® represent solutions with an optimum price/performance ratio for many applications. Especially for short travels, hanging and small standing applications. E4/ light types are often first choice.
[Features]
- Large inner heights combined with low weight
- E4/light e-chains® offer optimum price and performance solutions for many applications
- Especially suitable for short travel distances, hanging and standing designsConfigure nowMin. Shipping Days ： 6 Days -
E-chains® With Crossbars Every Link, E4/Light, 15250 Series
IGUS
Weight reduction, a larger interior space and a reduced price. The characteristics of the E4/light system: thinner side links (for all types) and a thinner crossbar (for some types: 14240, 14340). E4/light e-chains® represent solutions with an optimum price/performance ratio for many applications. Especially for short travels, hanging and small standing applications. E4/ light types are often first choice.
[Features]
- Large inner heights combined with low weight
- E4/light e-chains® offer optimum price and performance solutions for many applications
- Especially suitable for short travel distances, hanging and standing designsConfigure nowMin. Shipping Days ： 6 Days -
E-chains® With Crossbars Every 2nd Link, E4/Light, 15350 Series
IGUS
Weight reduction, a larger interior space and a reduced price. The characteristics of the E4/light system: thinner side links (for all types) and a thinner crossbar (for some types: 14240, 14340). E4/light e-chains® represent solutions with an optimum price/performance ratio for many applications. Especially for short travels, hanging and small standing applications. E4/ light types are often first choice.
[Features]
- Large inner heights combined with low weight
- E4/light e-chains® offer optimum price and performance solutions for many applications
- Especially suitable for short travel distances, hanging and standing designsConfigure nowMin. Shipping Days ： 6 Days -
E2/000 Half E-tubes, 2450 Series
IGUS
Series E2/000 is the fourth generation in this size. All past experience went into this series: easy and versatile assembly combined with ruggedness - high strength paired with quieter motion - long cable life and many mounting options. The design is consistent across all E2/000 variants. It is the standard product for machinery around the world.
Advantages of the E2/000 series:
- When a medium-sized, strong system (e-chains®, half e-tubes, completely enclosed e-tubes) is required
- For unsupported lengths up to 3.0m and fill weights up to 13kg/m
- For long travels up to 150m
- If an openable system is required to quickly open from either the left or right
- Various fastening optionsConfigure nowMin. Shipping Days ： 6 Days -
E2/000 Full E-tubes, 2480 Series
IGUS
Series E2/000 is the fourth generation in this size. All past experience went into this series: easy and versatile assembly combined with ruggedness - high strength paired with quieter motion - long cable life and many mounting options. The design is consistent across all E2/000 variants. It is the standard product for machinery around the world.
Advantages of the E2/000 series:
- When a medium-sized, strong system (e-chains®, half e-tubes, completely enclosed e-tubes) is required
- For unsupported lengths up to 3.0m and fill weights up to 13kg/m
- For long travels up to 150m
- If an openable system is required to quickly open from either the left or right
- Various fastening optionsConfigure nowMin. Shipping Days ： 6 Days -
E2/000 Full E-tubes, 3480 Series
IGUS
Series E2/000 is the fourth generation in this size. All past experience went into this series: easy and versatile assembly combined with ruggedness - high strength paired with quieter motion - long cable life and many mounting options. The design is consistent across all E2/000 variants. It is the standard product for machinery around the world.
Advantages of the E2/000 series:
- When a medium-sized, strong system (e-chains®, half e-tubes, completely enclosed e-tubes) is required
- For unsupported lengths up to 3.0m and fill weights up to 13kg/m
- For long travels up to 150m
- If an openable system is required to quickly open from either the left or right
- Various fastening optionsConfigure nowMin. Shipping Days ： 6 Days -
E2 R E-tubes, R48 Series
IGUS
E2 R e-tubes - small pitch for higher speeds and smooth motion. igus® e-tubes work in hot swarf areas, in areas of dirt and dust generated by woodworking, steel mills, pulp and paper, textile, agriculture, coal plant and many other hostile environments.
[Features]
- High level of protection against swarf (including hot swarf)
- Robust and sealed
- Space-efficient with optimised ratio of inner to outer dimensions
- Modular interior separation
- Universal KMA mounting brackets with attachment options from any sideConfigure nowMin. Shipping Days ： 6 Days -
E2 R E-tubes, R68 Series
IGUS
E2 R e-tubes - small pitch for higher speeds and smooth motion. igus® e-tubes work in hot swarf areas, in areas of dirt and dust generated by woodworking, steel mills, pulp and paper, textile, agriculture, coal plant and many other hostile environments.
[Features]
- High level of protection against swarf (including hot swarf)
- Robust and sealed
- Space-efficient with optimised ratio of inner to outer dimensions
- Modular interior separation
- Universal KMA mounting brackets with attachment options from any sideConfigure nowMin. Shipping Days ： 6 Days -
Easy chain® - version "E", E065 Series
IGUS
Cost-effective, easy to fill e-chains® are available in two versions. In the "E" version the cable is simply installed from the outside, and in the "Z" version from the inside. The primaryreason to choose easy chains® is to save time when fitting cables. The material, igumid NB, presents more application opportunities due to its flexibility, UL94-V2 classification and excellent cleanroom qualities. The onepiece design keeps the easy chain® very cost effective.
[Features]
- Easy filling without opening and closing the lids
- If quiet running is required
- If a light and cost-effective e-chain® is required
- For high accelerationsConfigure nowMin. Shipping Days ： 6 Days -
E-chain®, E1.17 Series
IGUS
Modular e-chain®, 1-piece strip designed for simple applications - the E1 design brings the benefits of an e-chain® to applications where previously this solution was too expensive. E1 is more economic for higher volumes, quicker to assemble yet still offers great control and protection for moving cables.
[Features]
-
- If a small amount of filling is required
- If a cost-effective e-chain® is required
- If easy installation is required
- If a simple solution is required
- For low duty cyclesConfigure nowMin. Shipping Days ： 6 Days -
E-chain®, E1.18 Series
IGUS
Modular e-chain®, 1-piece strip designed for simple applications - the E1 design brings the benefits of an e-chain® to applications where previously this solution was too expensive. E1 is more economic for higher volumes, quicker to assemble yet still offers great control and protection for moving cables.
[Features]
-
- If a small amount of filling is required
- If a cost-effective e-chain® is required
- If easy installation is required
- If a simple solution is required
- For low duty cyclesConfigure nowMin. Shipping Days ： 6 Days -
E-chain®, E1.20 Series
IGUS
Modular e-chain®, 1-piece strip designed for simple applications - the E1 design brings the benefits of an e-chain® to applications where previously this solution was too expensive. E1 is more economic for higher volumes, quicker to assemble yet still offers great control and protection for moving cables.
[Features]
-
- If a small amount of filling is required
- If a cost-effective e-chain® is required
- If easy installation is required
- If a simple solution is required
- For low duty cyclesConfigure nowMin. Shipping Days ： 6 Days -
E-chains®, E2.48 Series
IGUS
The proven e-chain system® E2/000 has been the worldwide standard in machinery since the year 2000. Continuous improvements over many years have now been combined in the new generation E2.1 and a new standard has been set. More usable filling space with the same outer dimensions and lower noise with increased service life and strength.
[Features]
- More useable interior space while the outer height is the same as the E2/000 e-chains®
- Easy to open - openable along the inner and outer radius, from both sides (left or right)
- Quiet operation due to optimised brake
- Greater strength for unsupported applications
- Longer service life for gliding applications
- Notched crossbar with 2.5mm spacing
- Complete interior separation rangeConfigure nowMin. Shipping Days ： 6 Days -
E2.1 Micro - One-piece Design, E2C.15 Series
IGUS
E2.1 micro e-chains® are very small, one- and two-piece e-chains® with low weight, making them ideal for highly dynamic applications. E2.1 micro e-chains® are optimal for smallest installation spaces, and are available in many versions. They feature a strong stop-dog system for up to 25% longer unsupported travels as well as 100% higher fill weights (compared to similar igus® types). They are lightweight, robust and easy to open. An e-chain® opener is included in order to open the e-chain® in one go. Many accessories like interior separation and fixation options are also available.
[Features]
- More useable installation space*
- 25% more unsupported length*
- 100% more fill weight*
- 10% weight saving*
- Chain opener for opening long sections of chain quickly. Provided free of charge with the first delivery
- Cable friendly interior separation range
- Openable from both sides (left or right)
- Available in 2 sizes, from stock
- Version with electrically conductive ESD material, tested with over 10 million cycles for the most demanding application* in comparison to equivalent igus® seriesConfigure nowMin. Shipping Days ： 6 Days -
System E3 - 3-piece E-chains®, E3.10 Series
IGUS
E3 combines small pitch, smooth running, low noise, stability, easy assembly and low cost. The spring connector element replaces the pin and bore and avoids relative movement between the joints. This means virtually no wear or abrasion (cleanroom). To reduce production and assembly costs, the spring connector is on a segment of ten e-chain® links.
[Features]
- For high speeds and accelerations
- For extremely fast opening and closing
- Low noise 38dB(A) - low noise and low vibration due small pitch
- Cleanroom ISO Class 1 - virtually no wear or abrasionConfigure nowMin. Shipping Days ： 6 Days -
System E3 - 3-piece E-chains®, E3.15 Series
IGUS
E3 combines small pitch, smooth running, low noise, stability, easy assembly and low cost. The spring connector element replaces the pin and bore and avoids relative movement between the joints. This means virtually no wear or abrasion (cleanroom). To reduce production and assembly costs, the spring connector is on a segment of ten e-chain® links.
[Features]
- For high speeds and accelerations
- For extremely fast opening and closing
- Low noise 38dB(A) - low noise and low vibration due small pitch
- Cleanroom ISO Class 1 - virtually no wear or abrasionConfigure nowMin. Shipping Days ： 6 Days -
E6.1 E-chains®, E61.52 Series
IGUS
The E6.1 series is a development of the E6 series. It incorporates all the advantages of the E6 such as strength, cleanroom-compatibility and low weight in addition to even quieter operation at higher maximum speeds. In addition, its accessibility to the interior and the assembly and handling have been improved.
[Features]
- Low-noise - from a noise level of 32dB(A)1)
- Weight savings approx. 30% compared to the System E6
- Highly dynamic
- Extremely low vibration
- Cleanroom-compatible due to principle of low-abrasion for connectors, without pin/bore connection
- Virtually no polygon effect, smooth rolling operation
- Smooth interior design for a long lifetime for cables and hoses
- Crossbars removable along the inner and outer radius
- Option without camber (NC) simply by turning the inner linkConfigure nowMin. Shipping Days ： 6 Days -
E6.1 E-chains®, E61.80 Series
IGUS
The E6.1 series is a development of the E6 series. It incorporates all the advantages of the E6 such as strength, cleanroom-compatibility and low weight in addition to even quieter operation at higher maximum speeds. In addition, its accessibility to the interior and the assembly and handling have been improved.
[Features]
- Low-noise - from a noise level of 32dB(A)1)
- Weight savings approx. 30% compared to the System E6
- Highly dynamic
- Extremely low vibration
- Cleanroom-compatible due to principle of low-abrasion for connectors, without pin/bore connection
- Virtually no polygon effect, smooth rolling operation
- Smooth interior design for a long lifetime for cables and hoses
- Crossbars removable along the inner and outer radius
- Option without camber (NC) simply by turning the inner linkConfigure nowMin. Shipping Days ： 6 Days -
Autoglide Version 03 - Easy Filling, EA16 Series
IGUS
Long travels are always demanding for an e-chain system®. For much of the travel, the e-chain® must run on the lower run or on glide bars. In addition the e-chain system® needs guides, in order to prevent sideways movement. In most cases this is ensured by using a guide trough. However, there are also applications where a guide trough is not desirable for space reasons, whether this is due to visual or spatial requirements. In order to meet this need, igus® developed the autoglide system in 1995. autoglide is a self-aligning e-chain®, which can dispense with guide troughs for up to 80m travel.
[Features]
- Travels up to 80m and travel speeds up to 2.5m/s
- Cost-effective solution, guide troughs not required
- Very fast installation for long travel distances, no guide troughs needed!
- Small width, quiet operationConfigure nowMin. Shipping Days ： 6 Days -
Autoglide Version 03 - Easy Filling, EA25 Series
IGUS
Long travels are always demanding for an e-chain system®. For much of the travel, the e-chain® must run on the lower run or on glide bars. In addition the e-chain system® needs guides, in order to prevent sideways movement. In most cases this is ensured by using a guide trough. However, there are also applications where a guide trough is not desirable for space reasons, whether this is due to visual or spatial requirements. In order to meet this need, igus® developed the autoglide system in 1995. autoglide is a self-aligning e-chain®, which can dispense with guide troughs for up to 80m travel.
[Features]
- Travels up to 80m and travel speeds up to 2.5m/s
- Cost-effective solution, guide troughs not required
- Very fast installation for long travel distances, no guide troughs needed!
- Small width, quiet operationConfigure nowMin. Shipping Days ： 6 Days -
E2 Mini - One-Piece E-chains®, F17 Series
IGUS
E2 mini are small one- or two-piece e-chains®, recommended for highly dynamic applications. igus® also offers a range of accessories and fixation options. Upgrades to openable versions are available for many types. Different types are interchangeable and can also serve as replacements.
[Features]
- If a small, but extremely strong e-chain® is required
- Quiet operation due to small pitch
- For highly dynamic applications
- Variety of options - E2 mini as non-openable or openable along the inner or outer radiusConfigure nowMin. Shipping Days ： 6 Days -
Zipper E-tubes, R07 Series
IGUS
igus® "zipper" e-chains® and e-tubes deliver in terms of practicality and performance. The "zipper" function makes them a very useful product to reduce assembly time. The small pitch, the tough-elastic zipper-band, and the sturdy link work well in high acceleration applications. The "zipper" series is one of the most popular igus® e-chain® series for demanding applications.
[Features]
- zipper-like design for quick opening and closing of lids
- zipper e-chains® can be lengthened and shortened at any point
- Small pitch for low noise, smooth running
- High accelerations: 100 m/s2 and moreConfigure nowMin. Shipping Days ： 6 Days -
Zipper E-tubes, R17 Series
IGUS
igus® "zipper" e-chains® and e-tubes deliver in terms of practicality and performance. The "zipper" function makes them a very useful product to reduce assembly time. The small pitch, the tough-elastic zipper-band, and the sturdy link work well in high acceleration applications. The "zipper" series is one of the most popular igus® e-chain® series for demanding applications.
[Features]
- zipper-like design for quick opening and closing of lids
- zipper e-chains® can be lengthened and shortened at any point
- Small pitch for low noise, smooth running
- High accelerations: 100 m/s2 and moreConfigure nowMin. Shipping Days ： 6 Days -
R2.1 E-tubes, R2.26 Series
IGUS
Cost-effective, strong e-tubes with 26, 40, 48 and 75mm inner height. Openable and removable lids along inner or outer radius, openable from both sides. Very sealed design and strong double stop-dogs for high fill weights and unsupported lengths.
[Features]
-
- Large inner height and therefore cost effective
- Cables are protected from swarf
- Easy to fill, lids openable along the inner or outer radius, from both sides
- Low noise operation due to integrated brake
- Notch separator, recommended for sidemounted applicationsConfigure nowMin. Shipping Days ： 6 Days -
R2.1 E-tubes, R2.75 Series
IGUS
Cost-effective, strong e-tubes with 26, 40, 48 and 75mm inner height. Openable and removable lids along inner or outer radius, openable from both sides. Very sealed design and strong double stop-dogs for high fill weights and unsupported lengths.
[Features]
-
- Large inner height and therefore cost effective
- Cables are protected from swarf
- Easy to fill, lids openable along the inner or outer radius, from both sides
- Low noise operation due to integrated brake
- Notch separator, recommended for sidemounted applicationsConfigure nowMin. Shipping Days ： 6 Days -
Easy chain® - version "Z", Z065.3 Series
IGUS
Cost-effective, easy to fill e-chains® are available in two versions. In the "E" version the cable is simply installed from the outside, and in the "Z" version from the inside. The primaryreason to choose easy chains® is to save time when fitting cables. The material, igumid NB, presents more application opportunities due to its flexibility, UL94-V2 classification and excellent cleanroom qualities. The onepiece design keeps the easy chain® very cost effective.
[Features]
- Easy filling without opening and closing the lids
- If quiet running is required
- If a light and cost-effective e-chain® is required
- For high accelerationsConfigure nowMin. Shipping Days ： 6 Days -
Office e-chain®, ZF14 Series
IGUS
Cables fitted quickly, e-chain® attached quickly, attractive design, nice and tidy. This e-chain® was designed and developed especially for the furniture industry.
[Features]
- Aesthetic design
- Closed outer contours (half-tube)
- Mounting brackets easy to clip on
- Easy to fill, even when installed with "easy" design
- Cable-friendly due to smooth interior
- UL94-V2 certified
- Mounting brackets can be either screwed or bonded thanks to the large flat surface on the bottomConfigure nowMin. Shipping Days ： 6 Days -
Energy supply chains closed, polyamide (80850)
NORELEM
· Plastic chains with high torsional stiffness
· Suitable for long travel distances
· Rapid shortening/extending possible
· Low maintenance
· UV resistantConfigure nowStarting from∗ ： 27.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Tension relief, polyamide (80850-93)
NORELEM
· Integratable in connecting element
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 2.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Divider, polyamide (80850-92)
NORELEM
· Separates the cables within the energy supply chain.
· Rounded edges protect cables
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 0.32 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connecting element, polyamide (80850-91)
NORELEM
· Set for fixed point and carrier
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 44.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Tension relief, polyamide (80850-33)
NORELEM
· Integratable in connecting element
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 1.32 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Divider, polyamide (80850-32)
NORELEM
· Separates the cables within the energy supply chain.
· Rounded edges protect cables
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 0.32 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connecting element, polyamide (80850-31)
NORELEM
· Set for fixed point and carrier
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 15.15 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Tension relief, polyamide (80850-23)
NORELEM
· Integratable in connecting element
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 0.40 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Divider, polyamide (80850-22)
NORELEM
· Separates the cables within the energy supply chain.
· Rounded edges protect cables
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 0.32 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connecting element, polyamide (80850-21)
NORELEM
· Set for fixed point and carrier
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 8.49 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Divider, polyamide (80850-12)
NORELEM
· Separates the cables within the energy supply chain.
· Rounded edges protect cables
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 0.32 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connecting element, polyamide (80850-11)
NORELEM
· Set for fixed point and carrier
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 6.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connecting element, polyamide (80850)
NORELEM
· Set for fixed point and carrier
· Maintenance friendly and easy to install
· Stable design, long service lifeConfigure nowStarting from∗ ： 3.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Energy supply chains openable from both sides, polyamide (80850)
NORELEM
· Plastic chains with high torsional stiffness
· Suitable for long travel distances
· Openable along the inner and outer radius
· Rapid shortening/extending possible
· Low maintenance
· UV resistantConfigure nowStarting from∗ ： 110.83 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Cover Type |
| Properties |
| Height of Inside H1(mm) |
| Number of Internal carrier divisions |
| Width of Inside W1(mm) |
| Bending radius R(mm) |
| Maximum Cable Outer Diameter Dp(mm) |
| Operating Speed(m/s) |
| Pitch P(mm) |
| Cable Insert Surface |
| Cable Insert Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | IGUS | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM |
| Product Series | E2 Mini - One-Piece E-chains®, Non-openable, With Moulded-in Vertical Separation, 11.080 Series | E-chains® With Crossbars Every 2nd Link, E4/Light, 14650 Series | E-chains® With Crossbars Every 2nd Link, E4/Light, 15150 Series | E-chains® With Crossbars Every 2nd Link, E4/Light, 15350 Series | Energy supply chains openable from both sides, polyamide (80850) | ||||||||||||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27.06 € *Unit price with basic configuration | 2.19 € *Unit price with basic configuration | 0.32 € *Unit price with basic configuration | 44.10 € *Unit price with basic configuration | 1.32 € *Unit price with basic configuration | 0.32 € *Unit price with basic configuration | 15.15 € *Unit price with basic configuration | 0.40 € *Unit price with basic configuration | 0.32 € *Unit price with basic configuration | 8.49 € *Unit price with basic configuration | 0.32 € *Unit price with basic configuration | 6.28 € *Unit price with basic configuration | 3.96 € *Unit price with basic configuration | 110.83 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cover Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Properties | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height of Inside H1(mm) | - | - | - | - | - | - | - | 25 | 25 | 45 | 25 | - | - | - | - | - | - | 14.9 | - | - | 52 | - | 32 | 25.2 | - | 10.3 | - | 26 | 75 | 11.3 | 21 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of Internal carrier divisions | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Width of Inside W1(mm) | - | - | - | - | - | - | - | 25 ～ 125 | 25 ～ 125 | 50 ～ 250 | 25 ～ 130 | - | - | - | - | - | - | 10 ～ 50 | - | - | 40 ～ 300 | - | 48 | 50 | - | 10 ～ 50 | - | 50 | 111 ～ 200 | 9 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bending radius R(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Cable Outer Diameter Dp(mm) | - | - | - | - | - | - | - | 22.5 | 22.5 | 40.5 | 22 | - | - | - | - | - | - | 12.5 | - | - | 46 | - | 28.5 | 22.5 | - | 8 | - | 23 | 60 | 7 | 18 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating Speed(m/s) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch P(mm) | - | - | - | - | - | - | - | 46 | 46 | 67 | 30.3 | - | - | - | - | - | - | 20 | - | - | 30 | - | 30.5 | 25 | - | 20 | - | 35 | 60 | 15 | 30.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cable Insert Surface | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cable Insert Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Cover Type
-
Properties
-
Height of Inside H1(mm)
-
Number of Internal carrier divisions
-
Width of Inside W1(mm)
- 5
- 6
- 7
- 9
- 10
- 13
- 14
- 15
- 15.5
- 16
- 18
- 19.5
- 20
- 22
- 23
- 24
- 25
- 29
- 30
- 35
- 36
- 38
- 40
- 42
- 44
- 48
- 50
- 52
- 57
- 58
- 60
- 62
- 62.5
- 63
- 64
- 65
- 68
- 70
- 74
- 75
- 77
- 80
- 85
- 87
- 87.5
- 89
- 90
- 96
- 97
- 100
- 103
- 108
- 110
- 111
- 112
- 115
- 120
- 125
- 130
- 137
- 140
- 150
- 162
- 163
- 168
- 169
- 175
- 182
- 187
- 200
- 207
- 212
- 225
- 237
- 250
- 262
- 275
- 287
- 300
- 312
- 325
- 337
- 350
- 362
- 375
- 387
- 400
- 412
- 425
- 437
- 450
- 462
- 475
- 487
- 500
- 512
- 525
- 537
- 550
- 600
-
Bending radius R(mm)
-
Maximum Cable Outer Diameter Dp(mm)
-
Operating Speed(m/s)
-
Pitch P(mm)
-
Cable Insert Surface
-
Cable Insert Type
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Cable Carriers
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Set Collars / Clamping Rings
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Ball Guides
- Spline Shaft
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Cable Carriers
- Ball Screws
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.