Push-Down Workpiece Clamps（Material：Steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Spring Clamps Small
MISUMI
[Features] The spring force clamps the workpiece from above.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 22.13 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spring Clamp Large
MISUMI
[The spring force clamps the workpiece from above.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 30.25 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Screw Jacks / screw jack
HALDER
Trapezoidal self-locking thread, spindle with final safety device. The holders, which can be secured by means of the T-slots, make it possible to tighten the jacks so that they will not slip out of position when a workpiece is changed. They also allow to fit screw jacks to vertical clamping surfaces. Screw jacks are frequently used for supporting workpieces. Use of the self-aligning cap ensures a correctly aligned bearing surface. Using the centering plate as an intermediate element, it is possible to fit a number of screw jacks sizes 52, 70 and 100 together one above the other.- 3D CAD data available
Configure nowStarting from∗ ： 10.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping Element Systems
HALDER
[Specifications]
・Type: Hold Down Type
・Arm Height Type: Standard
・Material: Steel
・Wearing parts: Heat-treated steel
Clamping Element Systems.- 3D CAD data available
Configure nowStarting from∗ ： 287.55 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Snap Clamp (Down Mini Type) (QLSNDM)
IMAO CORPORATION
Down press type compact spring clamp force of 10N to 30N for light-duty work.
[Features]
· Down press type.
· Compact and small sized hook, ideal for use in small spaces.
· Finger tip operation fitting lever shape
· In unclamped position lever is fixed.
· Employs snap system. (Rotating arm single lock type)- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 68.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bedding Supports
HALDER
The bedding support is used to support additional clamping points on components.The benefits of the bedding support are:- provides additional support without distortion- helps to eliminate tool vibration- compact, low construction- supports ribs, beads and shackles to reinforce clamped components- distortion-free support of raw parts- easy handling - clamping outside of workpiece is also possible by means of adjustable clamping levers.- 3D CAD data available
Configure nowStarting from∗ ： 236.76 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Swing Clamp (QLSW)
IMAO CORPORATION
Toolless clamp that clamps with rotating hook by lever operation. With lever, without lever, without hook / lever available. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.- 3D CAD data available
Configure nowStarting from∗ ： 219.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Swing Clamp (Cam Lever Type) (QLSWC)
IMAO CORPORATION
Toolless clamp with rotating hook by lever operation. Cam lever type. Black electroless nickel plating specification available. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 119.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Clamps, with soft face
HALDER
The brass plate protects the workpiece from damage. The combination of nut DIN 6330 B (EH 23070.)/conical seat DIN 6319 G (EH 23050.) on the clamping bolt and thrust pad DIN 6311 (EH 22560. removable) on the adjusting screw compensates for the lack of parallelity. The clamp can be used either way (soft or hard clamping surface).- 3D CAD data available
Configure nowStarting from∗ ： 24.25 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Supporting Elements
HALDER
The support element is used to support additional clamping points on components.The benefits of the support element are:- provides additional support without distortion- helps to eliminate tool vibration- supports ribs, beads and shackles to reinforce clamped components- distortion-free support of raw parts- 3D CAD data available
Configure nowStarting from∗ ： 869.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Loose Slot Tenons, DIN 6323
HALDER
To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650.Being simply pushed into position after fixture or clamping element has been roughly positioned, they cannot cause damage to the machine as could protruding fixed slot tenons or low slot tenons.- 3D CAD data available
Configure nowStarting from∗ ： 21.87 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Configure nowStarting from∗ ： 7.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Absorbing Pusher Pins
MISUMI
[Features] It is attached to the tip of the cylinder and gently clamps the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Configure nowStarting from∗ ： 9.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Down-Thrust Clamps, size 82,5
HALDER
The down-thrust clamp is a universal mechanical clamp that allows fast and easy exchange and clamping of workpieces - as the clamping head can be easily manually swivelled to clear the workpiece.The down-thrust clamps provide the following advantages:- compact footprint- clamping force of up to max. 30 kN via a clamping screw WS 36- clamping head swivels 360°- clamping stroke 30 mm- clamping height max. 250 mm- integrated clamping height stop for safe use- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing of 100 x 100 mm- 3D CAD data available
Configure nowStarting from∗ ： 1,734.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connecting Elements, hydraulically operated, single acting with lifting-off
HALDER
[Specifications]
・Material: Steel, case-hardened
・Release pressure to(bar): 80
・Release pressure of(bar): 60
・Holding force(N): 20000
Connecting Elements, hydraulically operated, single acting with lifting-off.Configure nowStarting from∗ ： 1,213.52 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Configure nowStarting from∗ ： 42.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Configure nowStarting from∗ ： 27.84 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping Elements
HALDER
Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.- 3D CAD data available
Configure nowStarting from∗ ： 224.35 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Straight Clamps, short
HALDER
[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30
Straight Clamps, short.- 3D CAD data available
Configure nowStarting from∗ ： 39.90 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Configure nowStarting from∗ ： 14.09 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamps, with nose, closed
HALDER
Thanks to the closed slot, the clamp is suitable for an application with rotating workpieces.- 3D CAD data available
Configure nowStarting from∗ ： 106.55 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Configure nowStarting from∗ ： 24.25 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Configure nowStarting from∗ ： 93.04 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece, with T-Bolt
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Configure nowStarting from∗ ： 108.70 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece, with stud
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Configure nowStarting from∗ ： 106.37 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamps, slotted, with adjustable counter piece, with stud with internal hexagon
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.- 3D CAD data available
Configure nowStarting from∗ ： 116.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Support Extensions, for straight clamps, slotted, with adjustable counter piece
HALDER
The support extension is screwed on the counter piece of the clamp EH 23185. for an extension of the clamping height (dimension h2). The clamping height can be adjusted stepless by means of the support extension.- 3D CAD data available
Configure nowStarting from∗ ： 30.90 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Floating Clamps, combined clamping and locking M 12
HALDER
The floating clamp is used to clamp and support additional clamping points on components.The benefits of the floating clamp are:- avoids vibration during the processing- clamps ribs, beads and shackles to reinforce clamped components- distortion-free clamping of raw parts.- 3D CAD data available
Configure nowStarting from∗ ： 957.58 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Floating Clamps, separate clamping and locking M 12
HALDER
Floating clamps with seperate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.The benefits of the floating clamp are:- avoids vibration during the processing- clamps ribs, beads and shackles to reinforce clamped components- distortion-free clamping of raw parts.- 3D CAD data available
Configure nowStarting from∗ ： 1,055.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Floating Clamps, combined clamping and locking M 16
HALDER
The floating clamp is used to clamp and support additional clamping points on components.The benefits of the floating clamp are:- especially suitable for large workpieces- avoids vibration during the processing- clamps ribs, beads and shackles to reinforce clamped components- distortion-free clamping of raw parts- 3D CAD data available
Configure nowStarting from∗ ： 1,722.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Jaws, for floating clamp M 12
HALDER
The clamping jaws can be used for floating clamps 23320.0012 and 23320.0014 to increase the clamping range.- 3D CAD data available
Configure nowStarting from∗ ： 72.68 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Jaws, for floating clamp M 16
HALDER
The clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.- 3D CAD data available
Configure nowStarting from∗ ： 121.34 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Compact Clamps
HALDER
The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or vertical position in both, machined and raw workpieces.Features:- exact and position precise clamping- ease of operation- high clamping force at low tightening torques, abrasion-resistant due to clamping lever with bearings- continuous, large clamping area- clamping lever entirely retractable for hindrance-free exchange of workpieces- threaded clamping lever can be used with many clamping elements, e.g. ball-ended thrust screws (EH 22700. - EH 22720.), self-aligning pads (EH 22730./EH 22740.) etc.- large adjusting range at constant clamping force- continuous height adjustment by height adaptors 23690.0112/.0116- easy and flexible set up- corrosion-resistant- resistent to dirt and chips- 3D CAD data available
Configure nowStarting from∗ ： 308.56 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Height Adaptors, for compact clamp
HALDER
The height adaptors for compact clamps allow for a clamping height increase and have the following characteristics:- continuous covering of clamping height- height adaptor allows an exact positioning of compact clamp at designated slot distances- height can optionally be expanded- 3D CAD data available
Configure nowStarting from∗ ： 125.03 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Straight Clamps, long
HALDER
[Specifications]
・Type: Hold Down Type
・Material: Heat Treatment Steel
・a(mm): 20, 30
・b1(mm): 12.5, 17
Straight Clamps, long- 3D CAD data available
Configure nowStarting from∗ ： 55.98 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Intermediate Elements
HALDER
[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 25~240
・b1(mm): 25, 30
Intermediate Elements.- 3D CAD data available
Configure nowStarting from∗ ： 125.98 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Intermediate Elements, with support
HALDER
[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 50, 60
・b1(mm): 25, 30
Intermediate Elements, with support- 3D CAD data available
Configure nowStarting from∗ ： 192.79 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Base Elements
HALDER
[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 30, 40
・b1(mm): 25, 30
Base Elements.- 3D CAD data available
Configure nowStarting from∗ ： 137.12 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Base Elements, swivelling
HALDER
[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 29.7, 39.7
・b(mm): 88, 105
Base Elements, swivelling.- 3D CAD data available
Configure nowStarting from∗ ： 360.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Base Elements, low
HALDER
[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 12
・b(mm): 30
Base Elements, low.- 3D CAD data available
Configure nowStarting from∗ ： 129.79 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Base Elements, for location hole
HALDER
[Specifications]
・Type: Peripherals
・Material: Steel
・a(mm): 8, 12
・b(mm): 25, 30
Base Elements, for location hole.- 3D CAD data available
Configure nowStarting from∗ ： 92.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Base Plates
HALDER
[Specifications]
・Material: Grey cast iron, Steel, case-hardened
・a(mm): 150, 200, 300
・b(mm): 100~800
・For screw: M12, M16
Base Plates.- 3D CAD data available
Configure nowStarting from∗ ： 2,895.63 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Base Plates, overall dimensions same as pallets DIN 55 201
HALDER
[Specifications]
・Material: Steel, case-hardened
・a(mm): 100
・For screw: M12, M16
・System: V40, V70
Base Plates, overall dimensions same as pallets DIN 55 201.- 3D CAD data available
Configure nowStarting from∗ ： 4,101.30 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out
HALDER
[Specifications]
・Material: Steel, case-hardened
・Release pressure to(bar): 80
・Release pressure of(bar): 60
・Holding force(N): 30000
Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out.Configure nowStarting from∗ ： 870.20 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Tightening Force (Range Selectable)(N) |
| Material |
| Type |
| Type |
| Applicable Tightening Force(N) |
| Stroke S(mm) |
| Arm Height Type |
| Arm Length Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | HALDER | HALDER | IMAO CORPORATION | HALDER | IMAO CORPORATION | IMAO CORPORATION | HALDER | HALDER | HALDER | HALDER | MISUMI | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Connecting Elements, hydraulically operated, single acting with lifting-off | Clamps, slotted, with adjustable counter piece, with stud with internal hexagon | Support Extensions, for straight clamps, slotted, with adjustable counter piece | Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out | |||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 22.13 € *Unit price with basic configuration Volume Discount | 30.25 € *Unit price with basic configuration Volume Discount | 10.20 € Special price *Unit price with basic configuration Promotional pricing | 287.55 € *Unit price with basic configuration | 68.64 € *Unit price with basic configuration Volume Discount | 236.76 € *Unit price with basic configuration | 219.48 € *Unit price with basic configuration | 119.94 € *Unit price with basic configuration Volume Discount | 24.25 € Special price *Unit price with basic configuration Promotional pricing | 869.88 € *Unit price with basic configuration | 21.87 € Special price *Unit price with basic configuration Promotional pricing | 7.08 € Special price *Unit price with basic configuration Promotional pricing | 25.31 € *Unit price with basic configuration Volume Discount | 9.12 € Special price *Unit price with basic configuration Promotional pricing | 1,734.53 € *Unit price with basic configuration | 1,213.52 € *Unit price with basic configuration | 42.30 € Special price *Unit price with basic configuration Promotional pricing | 27.84 € Special price *Unit price with basic configuration Promotional pricing | 224.35 € *Unit price with basic configuration | 39.90 € *Unit price with basic configuration | 14.09 € Special price *Unit price with basic configuration Promotional pricing | 106.55 € *Unit price with basic configuration | 24.25 € Special price *Unit price with basic configuration Promotional pricing | 93.04 € *Unit price with basic configuration | 108.70 € *Unit price with basic configuration | 106.37 € *Unit price with basic configuration | 116.46 € *Unit price with basic configuration | 30.90 € *Unit price with basic configuration | 957.58 € *Unit price with basic configuration | 1,055.26 € *Unit price with basic configuration | 1,722.14 € *Unit price with basic configuration | 72.68 € *Unit price with basic configuration | 121.34 € *Unit price with basic configuration | 308.56 € *Unit price with basic configuration | 125.03 € *Unit price with basic configuration | 55.98 € *Unit price with basic configuration | 125.98 € *Unit price with basic configuration | 192.79 € *Unit price with basic configuration | 137.12 € *Unit price with basic configuration | 360.88 € *Unit price with basic configuration | 129.79 € *Unit price with basic configuration | 92.28 € *Unit price with basic configuration | 2,895.63 € *Unit price with basic configuration | 4,101.30 € *Unit price with basic configuration | 870.20 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | Same day | 3 Days | 6 Days | 3 Days | 6 Days | 6 Days | Same day | 4 Days | Same day | Same day | 5 Days | Same day | 4 Days | 4 Days | Same day | Same day | 4 Days | 4 Days | Same day | 4 Days | Same day | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 3 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Tightening Force (Range Selectable)(N) | Up to 100 | up to 8.5 / up to 5.1 | - | - | Up to 100 | - | 100 to 1000 / 1000 to 3000 | 100 to 1000 / 1000 to 3000 | - | - | - | - | Up to 100 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Type | Main Body | Main Body | Optional Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | - | Main Body | Main Body | Main Body | Main Body | - | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | - | - | - |
| Type | - | - | Peripheral Components | Hold Down Type | - | Push-Pull Free Mounting Direction Type | - | - | Hold Down Type | Hold Down, Horizontal Handle | Peripheral Components | Hold Down Type | - | Hold Down Type | Hold Down Type | - | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Hold Down Type | Peripheral Components | Push-Pull Free Mounting Direction Type | Push-Pull Free Mounting Direction Type | Push-Pull Free Mounting Direction Type | Peripheral Components | Peripheral Components | Hold Down Type | Peripheral Components | Hold Down Type | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | - | - | - |
| Applicable Tightening Force(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stroke S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Arm Height Type | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard | Standard | Standard | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - |
| Arm Length Type | - | - | - | - | - | - | - | - | - | - | - | Standard | - | Standard | - | - | Standard | Standard | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Tightening Force (Range Selectable)(N)
- Up to 100
- 100 to 1000
- 1000 to 3000
- 3000 or More
- up to 8.5
- up to 5.1
-
Material
- Steel
- Stainless Steel
- Aluminum Alloy
- Zinc Alloy
-
Type
- Main Body
- Optional Components
-
Type
-
Applicable Tightening Force(N)
-
Stroke S(mm)
-
Arm Height Type
-
Arm Length Type
Brand
CAD data type
-
- 2D
- 3D
Categories related to Push-Down Workpiece Clamps
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.