Pillow Type（Bearing Unit, Type：Pillow Type Page 2）

103

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Pillow Block Bearing Units BF, for Support Side, Nickel-plated

MAEDLER

Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearing.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing. With 6 mounting holes.
Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for fixed side: Pillow Block Bearing BK.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Block Bearing Units EK, for Fixed Side, Nickel-plated

MAEDLER

Material: Housing from steel, all surfaces machined, nickel-plated. With quality rolling bearings.
Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals.
Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers.
Matching counterpart for support side: Pillow Block Bearing EF.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	100.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Pillow Blocks, Cast Iron Pillow Block (Heat Resistant)

MISUMI

It has excellent heat resistance compared to other casting pillows, and has heat resistance from room temperature to 200°C.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Blocks, Cast Iron Pillow Block (High Center Type)

MISUMI

The position of the center is higher than that of PDR (JIS nominal UCP200 type).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	59.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Blocks, Cast Iron Pillow Block (Heavy Load Type)

MISUMI

It is designed with high basic dynamic rating load and basic static rating load, and is used for heavy load applications.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	57.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Blocks, Cast Iron Pillow Block (Narrow Width Type)

MISUMI

[Features]Compared to other casting pillows, the width is narrower, making it suitable for space-saving.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.22 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Blocks, Cast Iron Pillow Block (Thick Type)

MISUMI

Since the housing is thicker-walled than other casting pillows, it is ideal for applications that require a high basic rated load.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	83.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Blocks, Cast Iron High Center

MISUMI

・ Features: The bearing section is set higher, which is suitable for avoiding interference with other parts.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	30.14 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Blocks, Stainless Steel Pillow Block Type (Solid Grease / Food Machinery Grease)

MISUMI

・ It retains excellent antiseptic properties and corrosion resistance, and can be used according to grease.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	118.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

General Structural Use Rolled Steel Pillow

NTN

A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

Select to compare

Configure now
Starting from^∗ ：	162.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spherical Graphite Cast Iron Pillow

NTN

A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.34 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Lightweight Cast Iron Pillow

NTN

[Features]
· A combination of plummer blocks and a ball bearing.
[Applications]
· Used frequently in transmission equipment and general machinery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.31 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Thick Cast Iron Pillow

NTN

The bearing box is thick for high rigidity, and is also appropriate for large shock loads. Also, the mounting bolt holes are drilled for accurate positioning. For this reason, it is appropriate for use with systems such as ceiling cranes.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	78.01 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Cast Iron Pillow Unit UCPH

NIPPON PILLOW BLOCK

Designed as a high-center pillow unit with high strength to shock loads.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cast Iron Pillow Unit UKIP

NIPPON PILLOW BLOCK

Pillow unit for use with heavy loads. The bearing box is thick with high rigidity, making it optimal for heavy load, vibration, and shock applications.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	86.20 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Cast Iron Pillow-Type Unit UCIP

NIPPON PILLOW BLOCK

The UCIP bearing box is a unit designed for high loads, with thick walls for excellent rigidity.
The drilled mounting bolt hole ensures positioning accuracy.
This unit can withstand high loads, vibration and shock.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	86.20 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Promotional pricing

Steel Plate Pillow Unit SBPP

NIPPON PILLOW BLOCK

Lightweight pillow unit for light loads made from the combination of a lightweight bearing and a press machined steel plate bearing box.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.06 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel Pillow-Type Unit USP-S6 UCSPA-H1-S6

NIPPON PILLOW BLOCK

Pillow-type unit featuring a bearing made from stainless steel and a bearing box made from either stainless steel or plastic for excellent corrosion resistance

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	53.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

ASAHI SEIKO

Pillow-type unit UCP200-type bearing box with raised center height.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.54 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type

ASAHI SEIKO

Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

Select to compare

Configure now
Starting from^∗ ：	14.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High Center Pillow Unit

FSBEARING

Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

Stock

Select to compare

Configure now
Starting from^∗ ：	12.78 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Steel Plate Pillow Unit

FSBEARING

Select to compare

Configure now
Starting from^∗ ：	8.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SKF Y-Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar Fixing, and Standard Seal

SKF

Select to compare

Configure now
Starting from^∗ ：	38.29 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SKF Pillow Block Unit, Gray Cast Iron, Short Base, Type SYF

SKF

Select to compare

Configure now
Starting from^∗ ：	15.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SKF Pillow Block Unit, Plastic, Long Base, Type P

SKF

Select to compare

Configure now
Starting from^∗ ：	4.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar, T Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	78.03 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, R Seal, Heavy-Duty Series

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	90.48 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar, R Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.25 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Long Base, Gray Cast Iron, Clamping Sleeve, R Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	48.75 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit, Combined, Sheet Steel, Eccentric Locking Collar, P Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Short Base, Gray Cast Iron, Grub Screws in Inner Ring, R Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	30.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, P Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.14 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar, P Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	29.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, L Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.63 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit, Sheet Steel, Eccentric Locking Collar, P Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	20.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit with Long Base, Gray Cast Iron, Grub Screws in Inner Ring, P Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	24.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Housing, Gray Cast Iron, Long Base, Type Ase

INA

Select to compare

Configure now
Starting from^∗ ：	0.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

INA Pillow Block Unit, Sheet Steel, Grub Screws in Inner Ring, P Seal

INA

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	18.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Ball Pillow Block Bearings BPP (Two-Part Steel Sheet, Zinc-Plated)

MAEDLER

Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel.
The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.00 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Pillow Block Bearings DIN 504 Version A, with Red Brass Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bush Rg7 (G-CuSn7ZnPb).
Bore Tolerance: ISO D10.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	136.84 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Heavy-Duty Pillow Block Bearings DIN 504 Version B, without Bush

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bore Tolerance: ISO D7.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.92 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings SSKP, Light Series

MAEDLER

Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.21 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings SSBPP, Two-Part Sheet, Stainless Steel

MAEDLER

Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304).
Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Light-Duty Pillow Block Bearings HM

MAEDLER

Material: Grey Cast Iron GG25 (GJL-250).
Bore tolerance: ISO D9.
With Bore for Drive-In Oiler.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.77 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Ball Pillow Block Bearings KP, Light Series

MAEDLER

Material: Housing: from Zinc die cast,
Rolling Bearing: from bearing steel.

The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Unit, Type
Bearing Unit, Type
Shaft Bore Dia. d(mm)
Unit Body Material
Bearing Inner Dia. Shape
Pillow Type, Category
Rolling Element Material
Surface Treatment
Specifications/Environment
Refueling Method

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MAEDLER	MAEDLER	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NTN	NTN	NTN	NTN	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	NIPPON PILLOW BLOCK	ASAHI SEIKO	ASAHI SEIKO	FSBEARING	FSBEARING	SKF	SKF	SKF	INA	INA	INA	INA	INA	INA	INA	INA	INA	INA	INA	INA	INA	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER
Product Series	Pillow Block Bearing Units BF, for Support Side, Nickel-plated	Pillow Block Bearing Units EK, for Fixed Side, Nickel-plated	Pillow Blocks, Cast Iron Pillow Block (Heat Resistant)	Pillow Blocks, Cast Iron Pillow Block (High Center Type)	Pillow Blocks, Cast Iron Pillow Block (Heavy Load Type)	Pillow Blocks, Cast Iron Pillow Block (Narrow Width Type)	Pillow Blocks, Cast Iron Pillow Block (Thick Type)	Pillow Blocks, Cast Iron High Center	Pillow Blocks, Stainless Steel Pillow Block Type (Solid Grease / Food Machinery Grease)	General Structural Use Rolled Steel Pillow	Spherical Graphite Cast Iron Pillow	Lightweight Cast Iron Pillow	Thick Cast Iron Pillow	Cast Iron Pillow Unit UCPH	Cast Iron Pillow Unit UKIP	Cast Iron Pillow-Type Unit UCIP	Steel Plate Pillow Unit SBPP	Stainless Steel Pillow-Type Unit USP-S6 UCSPA-H1-S6	Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type	Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type	High Center Pillow Unit	Steel Plate Pillow Unit	SKF Y-Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar Fixing, and Standard Seal	SKF Pillow Block Unit, Gray Cast Iron, Short Base, Type SYF	SKF Pillow Block Unit, Plastic, Long Base, Type P	INA Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar, T Seal	INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, R Seal, Heavy-Duty Series	INA Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar, R Seal	INA Pillow Block Unit with Long Base, Gray Cast Iron, Clamping Sleeve, R Seal	INA Pillow Block Unit, Combined, Sheet Steel, Eccentric Locking Collar, P Seal	INA Pillow Block Unit with Short Base, Gray Cast Iron, Grub Screws in Inner Ring, R Seal	INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, P Seal	INA Pillow Block Unit with Short Base, Gray Cast Iron, Eccentric Locking Collar, P Seal	INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, L Seal	INA Pillow Block Unit, Sheet Steel, Eccentric Locking Collar, P Seal	INA Pillow Block Unit with Long Base, Gray Cast Iron, Grub Screws in Inner Ring, P Seal	INA Pillow Block Housing, Gray Cast Iron, Long Base, Type Ase	INA Pillow Block Unit, Sheet Steel, Grub Screws in Inner Ring, P Seal	Ball Pillow Block Bearings BPP (Two-Part Steel Sheet, Zinc-Plated)	Heavy-Duty Pillow Block Bearings DIN 504 Version A, with Red Brass Bush	Heavy-Duty Pillow Block Bearings DIN 504 Version B, without Bush	Ball Pillow Block Bearings SSKP, Light Series	Ball Pillow Block Bearings SSBPP, Two-Part Sheet, Stainless Steel	Light-Duty Pillow Block Bearings HM	Ball Pillow Block Bearings KP, Light Series
CAD			2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D								3D	3D	3D	3D	3D	3D	3D	3D	3D	3D	3D		3D
Starting from^∗	42.01 € *Unit price with basic configuration Volume Discount	100.22 € *Unit price with basic configuration Volume Discount	34.20 € *Unit price with basic configuration Volume Discount	59.56 € *Unit price with basic configuration Volume Discount	57.53 € *Unit price with basic configuration Volume Discount	24.22 € *Unit price with basic configuration Volume Discount	83.54 € *Unit price with basic configuration Volume Discount	30.14 € *Unit price with basic configuration Volume Discount	118.42 € *Unit price with basic configuration Volume Discount	162.34 € *Unit price with basic configuration	17.34 € *Unit price with basic configuration	16.31 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	78.01 € *Unit price with basic configuration Volume Discount	23.08 € Special price *Unit price with basic configuration Promotional pricing	86.20 € *Unit price with basic configuration	86.20 € *Unit price with basic configuration	14.06 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	53.35 € *Unit price with basic configuration	23.54 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.05 € *Unit price with basic configuration	12.78 € *Unit price with basic configuration	8.70 € Special price *Unit price with basic configuration Promotional pricing	38.29 € *Unit price with basic configuration	15.55 € *Unit price with basic configuration	4.54 € *Unit price with basic configuration	78.03 € *Unit price with basic configuration	90.48 € *Unit price with basic configuration	40.25 € *Unit price with basic configuration	48.75 € *Unit price with basic configuration	25.74 € *Unit price with basic configuration	30.08 € *Unit price with basic configuration	25.14 € *Unit price with basic configuration	29.89 € *Unit price with basic configuration	40.63 € *Unit price with basic configuration	20.54 € *Unit price with basic configuration	24.32 € *Unit price with basic configuration	0.02 € *Unit price with basic configuration	18.95 € *Unit price with basic configuration	14.00 € *Unit price with basic configuration Volume Discount	136.84 € *Unit price with basic configuration Volume Discount	49.92 € *Unit price with basic configuration Volume Discount	31.21 € *Unit price with basic configuration Volume Discount	26.97 € *Unit price with basic configuration Volume Discount	36.77 € *Unit price with basic configuration Volume Discount	8.51 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	4 Days	4 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	8 Days	Same day	5 Days	Same day	11 Days	11 Days	Same day	6 Days	Same day	5 Days	5 Days	Same day	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Specifications																					Stock
Unit, Type	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit
Bearing Unit, Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type	Pillow Type
Shaft Bore Dia. d(mm)	-	-	12 ～ 50	25 ～ 50	25 ～ 50	12 ～ 50	40 ～ 65	12 ～ 50	20 ～ 50	30	20 ～ 45	12 ～ 40	40 ～ 50	17 ～ 35	35 ～ 125	40 ～ 140	12 ～ 30	15	12 ～ 50	12 ～ 35	17 ～ 50	15 ～ 30	20 ～ 40	20 ～ 50	12 ～ 31.75	40	30 ～ 60	25 ～ 45	20 ～ 50	15 ～ 30	20 ～ 50	12 ～ 60	15 ～ 60	20	15 ～ 30	15 ～ 60	20 ～ 60	17 ～ 30	-	-	-	-	-	-	-
Unit Body Material	Steel	Steel	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Stainless Steel	Structural Steel	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Steel Plate	Stainless Steel	Cast Iron	Steel	Cast Iron	Steel Plate	Cast Iron	Cast Iron	Steel Plate	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Steel Plate	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Steel Plate	Cast Iron	Cast Iron	Steel Plate	Steel	Others	Others	Stainless Steel	Stainless Steel	Others	Others
Bearing Inner Dia. Shape	-	-	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	-	-	-	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Taper Hole, Adapter	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Pillow Type, Category	-	-	Standard	High Center	Standard	Narrow Width	Thick	High Center	Standard	Standard	Standard	Lightweight	Thick	High Center	Thick	Thick	Standard	Standard	High Center	Standard	High Center	Lightweight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Rolling Element Material	-	-	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	-	-	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Stainless Steel	Steel	Steel	Steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Steel	-	-	Stainless Steel	Stainless Steel	-	Steel
Surface Treatment	-	-	Not Provided	Not Provided	Not Provided	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Specifications/Environment	-	-	Cold Resistance	-	Heavy Duty	Standard	Standard	Standard	Standard	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Refueling Method	-	-	Refueling Type	Refueling Type	Refueling Type	Refueling Type / Lubrication-Free Type	Refueling Type / Lubrication-Free Type	Refueling Type / Lubrication-Free Type	Lubrication-Free Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Unit, Type
- Bearing Unit
- Plummer Block
- Framed Bearing Unit
Enlarge image

Clear

Bearing Unit, Type
- Pillow Type
- Square Flange Type
- Diamond-Shaped Flange Type
- Take-Up Type
Enlarge image

Clear

Shaft Bore Dia. d(mm)
8

10

12

12.7

15

15.875

17

19.05

19.05 - 30

20

22.225

22.225 - 35

23.812

23.813

25

25.4

28.575

28.575 - 40

30

30.162

30.163

31.75

31.75 - 50

33.34

34.925

34.93

35

36.512

36.513

36.513 - 45

36.513 - 55

38.1

40

41.275

41.275 - 60

42.862

44.45

45

47.625 - 65

49.213

50

50.8

53.975 - 75

55

55.562

55.563

55.563 - 80

57.15

60

61.913

61.913 - 90

63.5

65

68.262

68.263

70

74.613

74.613 - 85

74.613 - 100

75

79.375 - 90

80

82.55

85

87.313

87.313 - 120

90

95

100

105

110

114.3

115

120

125

130

131.763

138.113

140
Drawing

Clear

Unit Body Material
- Cast Iron
- Stainless Steel
- Steel Plate
- Structural Steel
- Resin
- Others
- Steel
Clear

Bearing Inner Dia. Shape
- Cylindrical Hole
- Cylindrical Hole, Set Screw
- Cylindrical Hole, Eccentric Collar
- Taper Hole
- Taper Hole, Adapter
- Cylindrical Hole, Set Screw
Images

Clear