Bearing Lock Nuts / Shaft Nuts / Locknuts（Page 2）
Filter products by: Type
?* Information on days to ship and prices
-
Lockwashers DIN 5406 for Locknuts DIN 981, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
Safety plates for locknuts DIN 981.
A keyway is required on the shaft thread.- Volume Discount
Configure nowStarting from∗ ： 2.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMT with Locking Pins
MAEDLER
Material: KMT: Steel.
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up to 0.005 mm. Slotnut-design. Up to size 15 with two additional wrench flats.- Volume Discount
Configure nowStarting from∗ ： 21.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fine U Nut
SUNCO
The friction ring is crimped and integrated with the nut, same as on the U Nut.
[Features]
· Lock nut for bearing.
· The spring action of the friction ring creates friction on the male screw to cause a locking effect.
· Can be fixed in an intermediate position.
· Since it is all metal, it has excellent heat resistance.
· No key groove processing on the shaft side.
[Shape] Round
[Material] SS400 equivalent / S45C equivalent / SUS304 equivalent
[Screw type] Metric coarse
[Nominal designation] M10 × 0.75 to M150 × 2.0
[Type]Lock nut- Volume Discount
Configure nowStarting from∗ ： 3.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bearing Nut (Left-Hand Thread)
SUNCO
[Type] Lock nut
[Shape] Round
[Material] Steel
[Surface treatment] None
[Screw Type] Metric (coarse) thread
[Nominal thread] 10 × 0.75 to M200 × 3.0- Volume Discount
Configure nowStarting from∗ ： 5.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 71.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hydraulic Nuts - Series HMVC
BGL
Hydraulic Nuts are used to mount and dismount of rolling bearings with tapered bore. They can also be used for the dismounting of adapter or withdrawal sleeves.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,490.95 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.87 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 25.43 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Hydraulic Nut, HYDNUT Series, Metric Fine Pitch Thread / Trapezoid Thread
FAG
HYDNUT..-E- Volume Discount
Configure nowStarting from∗ ： 3,942.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 43.37 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Slotted Round Nuts DIN 1804, Type w
MAEDLER
Material: type w = steel, black oxide finish, unhardened, unground.
At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.
From size M45x1.5, the nuts have 6 slots.- Volume Discount
Configure nowStarting from∗ ： 2.05 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 70852, Steel
MAEDLER
Material: Steel, hardness class 17 H
These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Configure nowStarting from∗ ： 2.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Lock Nut
EVER-ON CORPORATION
[Features]
· Prevents screws loosening due to vibration.
· Functions the same as a bearing nut, so a tab washer is not required.
[Applications]
· For fastening bearings, etc.Configure nowStarting from∗ ： 4.39 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Bearing Washer
SUNCO
[Shape] Round
[Material] Steel
[Surface treatment] None
[Screw type] Metric coarse
[Type] Tooth lock washer- Volume Discount
Configure nowStarting from∗ ： 2.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
6333S AMF-TWINNUT nut - without collar
AMF
AMF-TWINNUT nut - without collar with hard detent.
Bright, strength class 10. The product is available per 1 peace.Configure nowStarting from∗ ： 40.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Slotted locknuts with thread locking
GANTER
GN 1804.2 slotted locknuts with thread locking can be secured against twisting by twisting off the threaded shaft via a d4 set screw. The thread flanks of the nut ensure damage-free securing and can be used as often as needed.
The d3 offset plane surface is intended as an axial contact surface.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 23.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Slotted locknuts, Stainless Steel
GANTER
On Stainless Steel-Slotted locknuts DIN 1804 the ground surface d3 stands proud and should be used as a mating surface.
The sizes M45x1,5 to M60x1,5 have 6 slots.- Volume Discount
Configure nowStarting from∗ ： 16.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 249.78 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Lock Nuts - Series HM..T
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 143.40 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Lock Washers - Series MB..A
BGL
These are an accessory for sleeves but they also have their own application. Their main purpose is to lock the KM and KML nuts preventing them from being released from the sleeve or the shaft itself.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.12 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2.30 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 7.37 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 11.07 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Slotted locknuts / Steel / DIN 70852
GANTER
[Specifications]
・Material: ST. Steel
[Features]
・Slotted locknuts DIN 70852 serve fir adjusting the amount of play or for securing shaft-hub connections in an axial direction, for example
・The flat design of the slotted locknuts allows for especially space-saving installation- Volume Discount
Configure nowStarting from∗ ： 3.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Precision Locknut, ZMA Series
INA
Precision locknuts ZMA, locking pegs, radially arranged, heavy series- Volume Discount
Configure nowStarting from∗ ： 74.89 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Slotted Round Nuts DIN 1804, Type h
MAEDLER
Material: type h = steel, hardened with the exeption of the thread, faces ground.
At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.
From size M45x1.5, the nuts have 6 slots.- Volume Discount
Configure nowStarting from∗ ： 5.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMMR, Single-Splitted, with Clamp Screw
MAEDLER
Material KMMR: Stainless steel 1.4301 (AISI 304).
Screw stainless steel A2-70.
Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Configure nowStarting from∗ ： 13.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMK-R with Integral Locking Device
MAEDLER
Material: KMK-R: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking device.
Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning.- Volume Discount
Configure nowStarting from∗ ： 29.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts GUK with Polyamide Insert, Self-locking, Steel, Zinc-plated
MAEDLER
Material: Steel, zinc-plated, hardness class 14 H.
These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Temperature max. 100°C.- Volume Discount
Configure nowStarting from∗ ： 1.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts DIN 70852, Stainless Steel
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread).
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Configure nowStarting from∗ ： 4.16 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Roller Bearing Retaining Nut HN Series
YOKOTA KIKOU
[Features]
· A shaft nut used for the rotating element of a machine which is designed to prevent loosening.Configure nowStarting from∗ ： 231.37 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Roller Bearing Retaining Washer and Clasp, AL Clasp Series
YOKOTA KIKOU
[Features]
· Washer for shafts that are used for the rotating elements of machines to prevent loosening.- Volume Discount
Configure nowStarting from∗ ： 23.02 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
HLB
SUNCO
Uses both the top nut (convex type) and bottom nut (concave type).
The top nut is perfectly circular with respect to the bolt, but the bottom nut has been eccentrically machined off-center with respect to the bolt.
[Features] Since the lower nut is eccentric, tightening the upper nut will apply a lateral force due to the wedging action. Friction to this male thread prevents loosening.
· Can be manually tightened to your desired position.
· Can be used repeatedly.
· HLB is for bearings.
[Shape] Round
[Material] SS400/S45C
[Nominal of Thread] M15X1.0/M10X0.75/M12X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0/M110X2.0/M115X2.0/M120X2.0/M125X2.0/M130X2.0/M135X2.0/M140X2.0/M145X2.0/M150X2.0/M155X3.0/M160X3.0/M165X3.0/M170X3.0/M175X3.0/M180X3.0/M185X3.0/M190X3.0/M195X3.0/M200X3.0
[Type] Lock Nut- Volume Discount
Configure nowStarting from∗ ： 77.48 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slot nut / HM
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 208.95 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Lock Nuts - Series HMLL
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 80.32 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Slot nut / KM
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.90 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Lock Nuts - Series KML
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 32.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Lock Washers - Series MBL
BGL
These are an accessory for sleeves but they also have their own application. Their main purpose is to lock the KM and KML nuts preventing them from being released from the sleeve or the shaft itself.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.98 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Clamping Nuts, self-locking
HALDER
Clamping nuts are used for rotating parts, especially for reversible shafts, for example for fixing the grinding wheel. The compact construction ensures a safe function and allows quick installation using a face pin wrench.Configure nowStarting from∗ ： 56.73 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 4.90 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 8.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 5.26 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 8,525.77 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Thread Nominal M |
| Shape |
| Material |
| Surface Treatment |
| Screw Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | YOKOTA KIKOU | SUNCO | SUNCO | FAG | BGL | SKF | SKF | FAG | FAG | MAEDLER | MAEDLER | EVER-ON CORPORATION | SUNCO | AMF | GANTER | GANTER | FAG | BGL | BGL | NKE BEARINGS | NKE BEARINGS | SKF | GANTER | INA | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | YOKOTA KIKOU | YOKOTA KIKOU | SUNCO | BGL | BGL | BGL | BGL | BGL | HALDER | ZEN | ZEN | SKF | SKF | FAG |
| Product Series | Hydraulic Nut, HYDNUT Series, Metric Fine Pitch Thread / Trapezoid Thread | Locknuts GUK with Polyamide Insert, Self-locking, Steel, Zinc-plated | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 2.88 € *Unit price with basic configuration Volume Discount | 21.47 € *Unit price with basic configuration Volume Discount | 1.27 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 3.98 € *Unit price with basic configuration Volume Discount | 5.25 € *Unit price with basic configuration Volume Discount | 71.18 € *Unit price with basic configuration Volume Discount | 1,490.95 € *Unit price with basic configuration | 0.87 € *Unit price with basic configuration | 25.43 € *Unit price with basic configuration | 3,942.28 € *Unit price with basic configuration Volume Discount | 43.37 € *Unit price with basic configuration Volume Discount | 2.05 € *Unit price with basic configuration Volume Discount | 2.38 € *Unit price with basic configuration Volume Discount | 4.39 € Special price *Unit price with basic configuration Promotional pricing | 2.46 € *Unit price with basic configuration Volume Discount | 40.62 € *Unit price with basic configuration | 23.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 16.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 249.78 € *Unit price with basic configuration Volume Discount | 143.40 € *Unit price with basic configuration | 1.12 € *Unit price with basic configuration | 2.30 € *Unit price with basic configuration | 7.37 € *Unit price with basic configuration | 11.07 € *Unit price with basic configuration | 3.20 € *Unit price with basic configuration Volume Discount | 74.89 € *Unit price with basic configuration Volume Discount | 5.36 € *Unit price with basic configuration Volume Discount | 13.08 € *Unit price with basic configuration Volume Discount | 29.96 € *Unit price with basic configuration Volume Discount | 1.28 € *Unit price with basic configuration Volume Discount | 4.16 € *Unit price with basic configuration Volume Discount | 231.37 € *Unit price with basic configuration | 23.02 € *Unit price with basic configuration Volume Discount | 77.48 € Special price *Unit price with basic configuration Promotional pricing | 208.95 € *Unit price with basic configuration | 80.32 € *Unit price with basic configuration | 7.90 € *Unit price with basic configuration | 32.93 € *Unit price with basic configuration | 10.98 € *Unit price with basic configuration | 56.73 € *Unit price with basic configuration | 4.90 € *Unit price with basic configuration | 8.73 € *Unit price with basic configuration | 1.82 € *Unit price with basic configuration | 5.26 € *Unit price with basic configuration | 8,525.77 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 4 Days | 4 Days | Same day | 6 Days | 6 Days | 5 Days | 21 Days | 12 Days | 12 Days | 4 Days | 4 Days | 4 Days | 4 Days | Same day | 6 Days | 5 Days | Same day | Same day | 3 Days | 21 Days | 21 Days | 4 Days | 4 Days | 12 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 8 Days | 8 Days | 6 Days | 21 Days | 21 Days | 21 Days | 4 Days | 21 Days | 3 Days | 4 Days | 4 Days | 7 Days | 12 Days | 4 Days |
| Type | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Tooth Lock Washers | Lock Nuts | - | - | - | - | - | - | - | - | Lock Nuts | Lock Nuts | Tooth Lock Washers | - | - | - | - | Lock Nuts | - | - | - | - | - | - | - | Lock Nuts | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts | Lock Nuts | Tooth Lock Washers | Lock Nuts | Lock Nuts | Lock Nuts | Lock Nuts | Lock Nuts | - | - | Lock Nuts | Lock Nuts | - | - | - |
| Thread Nominal M | - | - | - | M10X0.75 ～ M150X2.0 | 6 ～ 18 | - | 1.967x18F" ～ 37.410x3F" | - | M20x1 ～ M120x2 | - | - | - | - | M15×1.00 ～ M25×1.50 | - | M6 ～ M24 | M 12 x 1,5 ～ M 40 x 1,5 | M 16 x 1,5 ～ M 60 x 1,5 | - | Tr210x4 ～ Tr1060x8 | - | - | - | - | - | M15X1 ～ M130x2 | - | - | - | - | - | TM220x4 ～ TM330x5 | - | M65X2.0 | 8.628"x8F ～ 12.562"x6F | M 180x3 ～ Tr1215x8 | 0.391"x32F ～ 7.847"x8F | M120x2 ～ M200x3 | - | M20 | - | - | - | - | - |
| Shape | - | - | Round Shape | Round Shape | Round Shape | - | Round Shape | - | - | - | - | Round Shape | - | Round Shape | Round Shape | - | - | - | - | Round Shape | Round Shape | - | - | - | - | - | Round Shape | - | - | - | - | Round Shape | Round Shape | Round Shape | Round Shape | Round Shape | Round Shape | Round Shape | Round Shape | - | - | - | - | - | - |
| Material | Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel | - | - | Steel | Steel | - | - | Steel | Steel | Steel | Steel | - | Steel | - | - | - | - | Steel | Steel | Steel | - | - | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | - | - | - | - | - | Steel | Stainless Steel | Stainless Steel | - | Steel | - |
| Surface Treatment | None | Black Oxide | No Surface Treatment | No Surface Treatment | - | - | None | - | - | - | - | Black Oxide | None | No Surface Treatment | No Surface Treatment | - | - | - | - | None | None | - | - | - | - | - | Surface Treatment Provided | None | None | Zinc Plating | None | No Surface Treatment | No Surface Treatment | Surface Treatment Provided | None | None | None | None | None | - | - | - | Phosphate Coating | None | - |
| Screw Type | - | - | - | Metric (Coarse) Thread | - | - | - | - | - | - | - | - | - | Metric (Fine) Thread | Metric (Coarse) Thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Metric (Fine) Thread | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Thread Nominal M
- 0.391"x32F
- 0.469"x32F
- 0.586"x32F
- 0.664"x32F
- 0.781"x32F
- 0.969"x32F
- 1/2
- 1.173"x18F
- 1.376"x18F
- 1.563"x18F
- 1.767"x18F
- 1.967"x18F
- 1.967x18F"
- 2.157"x18F
- 2.157x18F"
- 2.360"x18F
- 2.360x18F"
- 2.548"x18F
- 2.548x18F"
- 2.751"x18F
- 2.751x18F"
- 2.933"x12F
- 2.933x12F"
- M3x0.35
- M3x0.5
- 3/8
- 3.137"x12F
- 3.137x12F"
- 3.340"x12F
- 3.340x12F"
- 3.527"x12F
- 3.527x12F"
- 3.730"x12F
- 3.730x12F"
- 3.918"x12F
- 3.918x12F"
- M4x0.5
- M4x0.7
- 4.122"x12F
- 4.122x12F"
- 4.325"x12F
- 4.325x12F"
- 4.716"x12F
- 4.716x12F"
- M5x0.5
- M5x0.8
- 5.106"x12F
- 5.106x12F"
- 5.497"x12F
- 5.497x12F"
- 5.888"x12F
- 5.888x12F"
- 6
- M6
- M6X0,5
- M6x0.75
- M6x1
- 6.284"x8F
- 6.284x8F"
- 6.659"x8F
- 6.659x8F"
- 7.066"x8F
- 7.066x8F"
- 7.472"x8F
- 7.472x8F"
- 7.847"x8F
- 7.847x8F"
- M8
- M8X0,75
- M8x0.75
- M8x1.0
- M 8 x 1
- M8x1.25
- 8.628"x8F
- 8.628x8F"
- 9.442"x6F
- 9.442x6F"
- M10
- M10x0,75
- M 10 x 0,75
- 10 x 0.75
- M10 x 0.75
- M10X0.75
- M10x0.75
- M 10x0.75
- M10X1
- M10x1
- M 10 x 1
- M10x1.5
- 10.192"x6F
- 10.192x6F"
- 11.004"x6F
- 11.004x6F"
- 11.785"x6F
- 11.785x6F"
- M12
- 12 x 1
- M12X1.0
- M12X1
- M12x1
- M 12 x 1
- M 12x1
- M 12 x 1,5
- M12x1.75
- 12.562"x6F
- 12.562x6F"
- 13.339x5F"
- M 14 x 1,5
- 14.170x5F"
- 14.957x5F"
- M15
- 15 x 1
- M15 x 1
- M15X1.0
- M15X1
- M15x1
- M15×1.00
- M 15 x 1
- M 15x1
- 15.745x5F"
- M16
- M 16 x 1,5
- M16x2
- 16.532x5F"
- M17
- 17 x 1
- M17X1.0
- M17X1
- M17x1
- M 17 x 1
- M 17x1
- 17.319x5F"
- 18
- M 18 x 1,5
- 18.107x5F"
- 18.894x5F"
- 19.682x5F"
- M20
- 20 x 1
- M20X1.0
- M20X1
- M20x1
- M20×1.00
- M 20 x 1
- M 20x1
- M 20 x 1,5
- M20x2.5
- 20.867x4F"
- M 22 x 1,5
- 22.048x4F"
- 23.623x4F"
- M24
- M 24 x 1,5
- M24x3
- 24.804x4F"
- M25
- M25X1,5
- M25x1,5
- M 25 x 1,5
- 25 x 1.5
- M25X1.5
- M25x1.5
- M25×1.50
- M 25x1.5
- M 26 x 1,5
- 26.379x4F"
- 27.961x3F"
- M 28 x 1,5
- 29.536x3F"
- M30
- M30X1,5
- M30x1,5
- M 30 x 1,5
- 30 x 1.5
- M30X1.5
- M30x1.5
- M 30x1.5
- M30x3.5
- 31.504x3F"
- M 32 x 1,5
- 33.473x3F"
- M35
- M35X1,5
- M35x1,5
- M 35 x 1,5
- 35 x 1.5
- M35 x 1.5
- M35X1.5
- M35x1.5
- M 35x1.5
- 35.441x3F"
- 37.410x3F"
- M 38 x 1,5
- M40
- M40X1,5
- M40x1,5
- M 40 x 1,5
- 40 x 1.5
- M40X1.5
- M40x1.5
- M 40x1.5
- M 42 x 1,5
- M45
- M45X1,5
- M45x1,5
- M 45 x 1,5
- 45 x 1.5
- M45X1.5
- M45x1.5
- M 45x1.5
- M 48 x 1,5
- M50
- M50X1,5
- M50x1,5
- M 50 x 1,5
- 50 x 1.5
- M50X1.5
- M50x1.5
- M 50x1.5
- M 52 x 1,5
- M55
- M 55 x 1,5
- M55x1.5
- M 55x1.5
- 55 x 2
- M55X2
- M55X2.0
- M55x2
- M55x2.0
- M 55 x 2
- M 55x2
- M 58 x 1,5
- M60
- M 60 x 1,5
- M60x1.5
- M 60x1.5
- 60 x 2
- M60X2
- M60X2.0
- M60x2
- M60x2.0
- M 60 x 2
- M 60x2
- M65
- M65x1.5
- M 65x1.5
- 65 x 2
- M65X2
- M65X2.0
- M65x2
- M 65x2
- M70
- M70x1.5
- M 70x1.5
- 70 x 2
- M70X2
- M70X2.0
- M70x2
- M 70x2
- M75
- M75x1,5
- M 75x1.5
- 75 x 2
- M75X2
- M75X2.0
- M75x2
- M 75x2
- M80
- 80 x 2
- M80X2
- M80X2.0
- M80x2
- M 80x2
- M85
- 85 x 2
- M85X2
- M85x2
- M 85x2
- M90
- 90 x 2
- M90X2
- M90X2.0
- M90x2
- M 90x2
- 94.742 mm
- M95
- 95 x 2
- M95X2.0
- M95x2
- M 95x2
- 99.517 mm
- M100
- 100 x 2
- M100X2
- M100X2.0
- M100x2
- M 100x2
- M105
- M105X2
- M105X2.0
- M105x2
- M110
- 110 x 2
- M110X2
- M110X2.0
- M110x2
- M 110x2
- M115
- 115 x 2
- M115X2
- M115X2.0
- M115x2
- 119.786 mm
- M120
- 120 x 2
- M120X2
- M120X2.0
- M120x2
- M 120x2
- M125
- 125 x 2
- M125X2
- M125X2.0
- M125x2
- 130 x 2
- M130X2
- M130X2.0
- M130x2
- M 130x2
- M130x3
- M 130x3
- M135
- 135 x 2
- M135X2.0
- M135x2
- 139.642 mm
- M140
- 140 x 2
- M140X2
- M140X2.0
- M140x2
- M 140x2
- M140x3
- M 140x3
- M145
- 145 x 2
- M145X2.0
- M145x2
- M150
- 150 x 2
- M150X2
- M150X2.0
- M150x2
- M 150x2
- M150x3
- M 150x3
- 155 x 3
- M155x3
- M160
- 160 x 3
- M160x3
- M 160x3
- M165x3
- 169.139 mm
- 170 x 3
- M170x3
- M 170x3
- 179.476 mm
- M180x3
- M 180x3
- 189.789 mm
- M190
- M190x3
- M 190x3
- 199.314 mm
- M200x3
- M 200x3
- TM205x4
- Tr205x4
- Tr 205x4
- Tr210x4
- Tr 210x4
- Tr215x4
- Tr 215x4
- TM220x4
- Tr220x4
- Tr 220x4
- Tr225x4
- Tr 225x4
- Tr230x4
- Tr 230x4
- TM235x4
- Tr235x4
- Tr 235x4
- 239.827 mm
- TM240x4
- Tr240x4
- Tr 240x4
- Tr250x4
- Tr 250x4
- TM260x4
- Tr260x4
- Tr 260x4
- Tr270x4
- Tr 270x4
- Tr275x4
- TM280x4
- Tr280x4
- Tr 280x4
- Tr290x4
- Tr 290x4
- Tr295x4
- TM300x4
- Tr300x4
- Tr 300x4
- Tr310x5
- Tr 310x5
- Tr315x5
- 319.075 mm
- TM320x5
- Tr320x5
- Tr 320x5
- TM330x5
- Tr330x5
- Tr 330x5
- Tr335x5
- TM340x5
- Tr340x5
- Tr 340x5
- Tr345x5
- Tr 345x5
- Tr350x5
- Tr 350x5
- Tr355x5
- TM360x5
- Tr360x5
- Tr 360x5
- TM365x5
- Tr365x5
- Tr 365x5
- Tr370x5
- Tr 370x5
- Tr375x5
- TM380x5
- Tr380x5
- Tr 380x5
- Tr385x5
- Tr 385x5
- Tr395x5
- Tr400x5
- Tr 400x5
- Tr410x5
- Tr 410x5
- Tr415x5
- TM420x5
- Tr420x5
- Tr 420x5
- Tr430x5
- Tr 430x5
- Tr435x5
- Tr440x5
- Tr 440x5
- Tr450x5
- Tr 450x5
- Tr460x5
- Tr 460x5
- Tr470x5
- Tr 470x5
- Tr480x5
- Tr 480x5
- Tr490x5
- Tr 490x5
- Tr500x5
- Tr510x6
- Tr520x6
- Tr530x6
- Tr540x6
- Tr550x6
- Tr560x6
- 560.019 mm
- Tr570x6
- Tr580x6
- Tr590x6
- Tr600x6
- 600.024 mm
- Tr610x6
- Tr625x6
- Tr630x6
- 630.022 mm
- Tr650x6
- Tr655x6
- Tr670x6
- 670.027 mm
- Tr680x6
- Tr690x6
- Tr695x6
- Tr710x7
- 710.209 mm
- Tr720x7
- Tr740x7
- Tr750x7
- 750.214 mm
- Tr760x7
- Tr775x7
- Tr780x7
- Tr800x7
- 800.202 mm
- Tr830x7
- Tr850x7
- 850.214 mm
- Tr880x7
- Tr900x7
- 900.201 mm
- Tr930x8
- Tr950x8
- 950.214 mm
- Tr980x8
- Tr1000x8
- Tr1035x8
- Tr1060x8
- Tr1095x8
- Tr1120x8
- Tr1155x8
- Tr1180x8
- Tr1215x8
-
Shape
-
Material
-
Surface Treatment
-
Screw Type
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
Categories related to Bearing Lock Nuts / Shaft Nuts / Locknuts
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.