Toothed Belts / Timing Belts（Page 5）

?* Information on days to ship and prices

• 

  Timing belts / XH / rubber / glass fibre / BANDO

  BANDO

  Engages properly and can transmit force. Lubrication not required, and replacing almost totally unnecessary.
  
  [Features]
  · Belt and pulley mesh properly, and number of rotations and movement amounts can be obtained just as calculated.
  · No metal-to-metal contact, so no lubrication equipment is not required.
  · High initial tension not required, so bearings and motors can be made small.
  · In addition to the standard specification, the next special specification synchro belt is being created.
  · Synchro belt for high loads (for high-load transmission…XH, XXH type).
  · An oil-resistant synchro belt (for use in places exposed to large amounts of oil).
  · A heat-resistant synchro belt (for use in places 90°C to 120°C).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	163.45 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Timing belts / XXH / rubber / glass fibre / BANDO

  BANDO

  Engages properly and can transmit force. Lubrication not required, and replacing almost totally unnecessary.
  
  [Features]
  · Belt and pulley mesh properly, and number of rotations and movement amounts can be obtained just as calculated.
  · No metal-to-metal contact, so no lubrication equipment is not required.
  · High initial tension not required, so bearings and motors can be made small.
  · In addition to the standard specification, the next special specification synchro belt is being created.
  · Synchro belt for high loads (for high-load transmission…XH, XXH type).
  · An oil-resistant synchro belt (for use in places exposed to large amounts of oil).
  · A heat-resistant synchro belt (for use in places 90°C to 120°C).

  Select to compare

  Configure now
  Starting from∗ ：	646.86 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Timing belts / S14M / rubber / glass fibre / BANDO

  BANDO

  Capable of high-torque transmission. Long life. Lubrication not required. The belt width can be made narrower than conventional belts with teeth.

  Select to compare

  Configure now
  Starting from∗ ：	288.58 €
  Min. Shipping Days ：	65 Days

  *Unit price with basic configuration

• 

  Timing belt connecting plates / 14M / aluminium / CONCAR

  CONCAR

  [Specifications]
  ・Material: Aluminum
  ・Winding nose: no
  ・Length(mm): 116
  
  Clamping Plates - dimension 14M. Clamping plates - also known as tensioning elements - are used to connect the pulley ends of finite timing belt goods cut by length (PU or neoprene). They are used in applications with linear motion, e.g. with positioning systems or transportation technology.

  Select to compare

  Configure now
  Starting from∗ ：	52.35 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belt connecting plates / L / aluminium / CONCAR

  CONCAR

  [Specifications]
  ・Material: Aluminum
  ・Winding nose: no
  ・Length(mm): 76.6
  
  Clamping Plates - dimension L. Clamping plates - also known as tensioning elements - are used to connect the pulley ends of finite timing belt goods cut by length (PU or neoprene). They are used in applications with linear motion, e.g. with positioning systems or transportation technology.

  Select to compare

  Configure now
  Starting from∗ ：	25.08 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Timing belt connecting plates / XL / aluminium / CONCAR

  CONCAR

  [Specifications]
  ・Material: Aluminum
  ・Winding nose: no
  ・Length(mm): 42.5
  
  Clamping Plates - dimension XL. Clamping plates - also known as tensioning elements - are used to connect the pulley ends of finite timing belt goods cut by length (PU or neoprene). They are used in applications with linear motion, e.g. with positioning systems or transportation technology.

  Select to compare

  Configure now
  Starting from∗ ：	19.26 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / DH / CR (neoprene) / glass fibre / CONCAR / ISO 5296

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 12.7
  ・Height(mm): 5.94
  
  Timing Belts - dimension DH. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	48.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / DL / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 9.525
  ・Height(mm): 4.57
  
  Timing Belts - dimension DL. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	28.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / DS4.5M / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 4.5
  ・Height(mm): 4.18
  
  Timing Belts - dimension DS 4,5M. STS SuperTorque timing belts are used for applications with very high standards with regard to power transfer, running properties and drive precision. The glass fibre tension members, which are coiled in a screw shape, guarantee good tensile strength and flexural properties. A tough, very hard-wearing nylon fabric covers the cogging and protects the cogs against wear. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	39.39 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / DS8M / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 8
  ・Height(mm): 7.47
  
  Timing Belts - dimension DS 8M. STS SuperTorque timing belts are used for applications with very high standards with regard to power transfer, running properties and drive precision. The glass fibre tension members, which are coiled in a screw shape, guarantee good tensile strength and flexural properties. A tough, very hard-wearing nylon fabric covers the cogging and protects the cogs against wear. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	78.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / DXL / CR (Neoprene) / glass fibre / CONCAR / ISO 5296

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 5.08
  ・Height(mm): 3.05
  
  Timing Belts - dimension DXL. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	9.68 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / H / CR (Neoprene) / glass fibre / CONCAR / DIN 5296

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 12.7
  ・Height(mm): 4.3
  
  Timing Belts - dimension H. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	12.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / H / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: no
  ・Division(mm): 12.7
  ・Height(mm): 4.3
  
  Timing Belts - dimension H-PU. PU timing belts are extremely resilient timing belts which are used for example in synchronous conveyance systems, for controlling linear motion or in drive and transport systems. They are designed for high shock loads, since they have a particularly high breaking strength. The expansion of a PU timing belt with steel tension members is very low; the belt tension remains almost constant. ConCar offers these belts from stock in all standard profiles. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	24.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / L / CR (Neoprene) / Glass fibre / CONCAR / DIN 5296

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 9.525
  ・Height(mm): 3.6
  
  Timing Belts - dimension L. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	5.89 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / L / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: no
  ・Division(mm): 9.525
  ・Height(mm): 3.6
  
  Timing Belts - dimension L-PU. PU timing belts are extremely resilient timing belts which are used for example in synchronous conveyance systems, for controlling linear motion or in drive and transport systems. They are designed for high shock loads, since they have a particularly high breaking strength. The expansion of a PU timing belt with steel tension members is very low; the belt tension remains almost constant. ConCar offers these belts from stock in all standard profiles. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	13.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / MXL / CR (neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 2.032
  ・Height(mm): 1.14
  
  Timing Belts - dimension MXL. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	1.48 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / RPP14 Gold / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 14
  ・Height(mm): 9.5
  
  Timing Belts - dimension RPP Gold 14. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	524.90 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / RPP8 Gold / CR (Neoprene) / glass fibre / CONCAR / "ISO 13050

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 8
  ・Height(mm): 5.4
  
  Timing Belts - dimension RPP Gold 8. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	42.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / RPP14 Silver / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 14
  ・Height(mm): 9.7
  
  Timing Belts - dimension RPP Silver 14. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	132.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / RPP14 / CR (Neoprene) / Glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 14
  ・Height(mm): 10
  
  Timing Belts - dimension RPP14. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	110.28 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / RPP14DD / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 14
  ・Height(mm): 14.8
  
  Timing Belts - dimension RPP14 DD. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	440.94 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / RPP5DD / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 5
  ・Height(mm): 5.3
  
  Timing Belts - dimension RPP5 DD. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	47.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / RPP8 / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 8
  ・Height(mm): 5.6
  
  Timing Belts - dimension RPP8. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	10.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Double toothed timing belt / RPP8DD / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 8
  ・Height(mm): 8.3
  
  Timing Belts - dimension RPP8 DD. The parabolic cog profile of the neoprene RPP timing belts from Megadyne enables an optimal force distribution over the cog height. Thanks to its properties (such as a high degree of efficiency, low noise, synchronous transmission, etc.), these endless neoprene timing belts from Megadyne can be used in many different applications, both for power transfer and in conveyance systems.

  Select to compare

  Configure now
  Starting from∗ ：	65.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / S14M / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 14
  ・Height(mm): 10.2
  
  Timing Belts - dimension S 14M. STS SuperTorque timing belts are used for applications with very high standards with regard to power transfer, running properties and drive precision. The glass fibre tension members, which are coiled in a screw shape, guarantee good tensile strength and flexural properties. A tough, very hard-wearing nylon fabric covers the cogging and protects the cogs against wear. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	108.35 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / S2M / CR (neoprene) / fibreglass / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 2
  ・Height(mm): 1.36
  
  Timing Belts - dimension S 2M. STS SuperTorque timing belts are used for applications with very high standards with regard to power transfer, running properties and drive precision. The glass fibre tension members, which are coiled in a screw shape, guarantee good tensile strength and flexural properties. A tough, very hard-wearing nylon fabric covers the cogging and protects the cogs against wear. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	7.29 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / S3M / CR (neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 3
  ・Height(mm): 1.9
  
  Timing Belts - dimension S 3M. STS SuperTorque timing belts are used for applications with very high standards with regard to power transfer, running properties and drive precision. The glass fibre tension members, which are coiled in a screw shape, guarantee good tensile strength and flexural properties. A tough, very hard-wearing nylon fabric covers the cogging and protects the cogs against wear. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	8.44 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / S8M / CR (neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass fiber
  ・Winding nose: no
  ・Division(mm): 8
  ・Height(mm): 5.3
  
  Timing Belts - dimension S 8M. STS SuperTorque timing belts are used for applications with very high standards with regard to power transfer, running properties and drive precision. The glass fibre tension members, which are coiled in a screw shape, guarantee good tensile strength and flexural properties. A tough, very hard-wearing nylon fabric covers the cogging and protects the cogs against wear. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	11.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / XH / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 22.225
  ・Height(mm): 11.2
  
  Timing Belts - dimension XH. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	123.41 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / XL / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: no
  ・Division(mm): 5.08
  ・Height(mm): 2.3
  
  Timing Belts - dimension XL-PU. PU timing belts are extremely resilient timing belts which are used for example in synchronous conveyance systems, for controlling linear motion or in drive and transport systems. They are designed for high shock loads, since they have a particularly high breaking strength. The expansion of a PU timing belt with steel tension members is very low; the belt tension remains almost constant. ConCar offers these belts from stock in all standard profiles. The belts are cut from the roll, making any belt width required possible.

  Select to compare

  Configure now
  Starting from∗ ：	6.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / XXH / CR (neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Standard: DIN 5296
  ・Division(mm): 31.75
  ・Height(mm): 15.7
  
  Timing Belts - dimension XXH. Synchronous belts with classic, trapezoid cogging offer a maintenance-free, low-cost alternative to standard drives such as chains and gears. Currently, applications range from small drives (computer printers) to heavy machine drives (oil pumps, etc.).

  Select to compare

  Configure now
  Starting from∗ ：	307.86 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Timing belts / open / 14M / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: yes
  ・Division(mm): 14
  ・Height(mm): 10
  
  Timing Belts Open Ended - dimension 14M. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / 5M / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: yes
  ・Division(mm): 5
  ・Height(mm): 3.6
  
  Timing Belts Open Ended - dimension 5M. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / 8M / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: yes
  ・Division(mm): 8
  ・Height(mm): 5.6
  
  Timing Belts Open Ended - dimension 8M. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / AT20 / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: yes
  ・Division(mm): 20
  ・Height(mm): 8
  
  Timing Belts Open Ended - dimension AT20. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / AT5 / PUR / Aramid, steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Winding nose: yes
  ・Division(mm): 5
  ・Height(mm): 2.7
  
  Timing Belts Open Ended - dimension AT5. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / ATL10 / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: yes
  ・Division(mm): 10
  ・Height(mm): 4.5
  
  Timing Belts Open Ended - dimension ATL10. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / H / CR (Neoprene), PUR / glass fibre, steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene, Polyurethane
  ・Coating: Standard, PAZ
  ・Tension cord: Glass, Steel
  ・Winding nose: yes, no
  ・Height(mm): 4.3
  ・Division(mm): 12.7
  
  Timing Belts Open Ended - dimension H.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / L / CR (Neoprene), PUR / glass fibre, steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene, Polyurethane
  ・Tension cord: Glass, Steel
  ・Winding nose: yes, no
  ・Height(mm): 3.6
  ・Division(mm): 9.525
  
  Timing Belts Open Ended - dimension L.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / MXL / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Height(mm): 1.1
  ・Division(mm): 2.032
  
  Timing Belts Open Ended - dimension MXL.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / S3M / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Height(mm): 1.9
  ・Division(mm): 3
  
  Timing Belts Open Ended - dimension S3M.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / S5M / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Height(mm): 3.4
  ・Division(mm): 5
  
  Timing Belts Open Ended - dimension S5M.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / S8M / CR (Neoprene) / glass fibre / CONCAR

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Tension cord: Glass
  ・Winding nose: no
  ・Height(mm): 5.3
  ・Division(mm): 8
  
  Timing Belts Open Ended - dimension S8M.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / T10 / PUR / Aramid, steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel, Kevlar
  ・Coating: PAZ, Standard, PAR
  ・Winding nose: yes
  ・Height(mm): 4.5
  ・Division(mm): 10
  
  Timing Belts Open Ended - dimension T10. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Timing belts / open / T20 / PUR / steel / CONCAR

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Tension cord: Steel
  ・Winding nose: yes
  ・Height(mm): 8
  ・Division(mm): 20
  
  Timing Belts Open Ended - dimension T20. There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings.

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

Loading...