Toothed Belt Pulleys / Timing Pulleys / Idlers（Page 3）

Filter products by: Type

155

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Timing belt pulleys / 14M / flanged pulley selectable / steel

UNITTA

Pulley for 14M type belts

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	152.17 €
Min. Shipping Days ：	24 Days

*Unit price with basic configuration

Timing belt pulleys / H / without flanged pulley / steel, grey cast iron / STB

KANEMITSU

JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type H, teeth no. 28 (carbon steel) teeth no. 30 (exceeds FC200 material)

[Features]
· Nominal diameter from 4 to 30 inches, 2 to 6 grooves for rich lineup, and dimensional precision to JIS reference standards, good balance measurements, can be used directly on high-speed rotator.

Select to compare

Configure now
Starting from^∗ ：	101.43 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Timing belt pulleys / T10 / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / T10-25

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.10 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Timing belt pulleys / 3M / with flanged pulley / aluminium / SGS

CONCAR

[Specifications]
・Material: Aluminum
・Division(mm): 3

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 3M / with flanged pulley / SGS

Select to compare

Configure now
Starting from^∗ ：	6.91 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / T2.5 / with flanged pulley / aluminium / SGG

CONCAR

[Specifications]
・Material: Aluminum
・Belt Width Used(mm): 4 and 6
・Division(mm): 2.5

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / T2.5 / with flanged pulley / SGG

Select to compare

Configure now
Starting from^∗ ：	7.58 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Toothed pulley profile HTD 8M, for 50 mm wide belts, for taper bush (22005)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Conical hole for taper clamping bushes

Select to compare

Configure now
Starting from^∗ ：	29.39 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Timing belt pulleys / S5M / with flanged pulley / steel / S5M100, S5M150, S5M250

KATAYAMA CHAIN

KANA timing pulley demonstrates superior performance of timing transmission with low noise and clean transmission levels. Use in combination with a timing belt.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	12.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Timing belt pulleys / H / flanged pulley selectable / configurable / cast iron, steel

MITSUBOSHI BELTING

Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	29.10 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Timing belt pulleys / L / flanged pulley selectable / configurable / cast iron, steel

MITSUBOSHI BELTING

Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Timing belt pulleys / T5 / flanged pulley selectable / configurable / material selectable / burnished, chemically nickel-plated

MITSUBOSHI BELTING

Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.95 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Timing belt pulleys / MXL / without flanged pulley / aluminium / PxxMXL60, PxxMXL100

UNITTA

Pulley for MXL type belts

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.07 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

Timing belt pulleys / L / without flanged pulley / steel, grey cast iron / STB

KANEMITSU

JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type L. Teeth no. 36 (material: carbon steel), teeth no. 40 (material: exceeds FC200)

Select to compare

Configure now
Starting from^∗ ：	93.62 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Timing belt pulleys / XL / without flanged pulley / steel / 037BF

BANDO

Pulley for turning the synchro belt. The special sized axles can also be processed. An abundant selection of sizes are available.

Select to compare

Configure now
Starting from^∗ ：	19.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Timing belt pulleys / T10 / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / T10-15

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	38.50 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / S5M / flanged pulley selectable / configurable / aluminium / anodised / S5M0100

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	21.73 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / S5M / flanged pulley selectable / configurable / aluminium, steel / anodised, burnished, chemically nickel-plated / S5M0150

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.78 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0400

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	71.10 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT

CONCAR

[Specifications]
・Division(mm): 5

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT

Select to compare

Configure now
Starting from^∗ ：	7.26 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / MXL / with flanged pulley / aluminium / SGA

CONCAR

[Specifications]
・Material: Aluminum
・Belt Width Used(mm): 6.35
・Division(mm): 2.032

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / MXL / with flanged pulley / SGA

Select to compare

Configure now
Starting from^∗ ：	11.98 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Toothed pulley profile T5, aluminium (22002)

NORELEM

· Standard T-profile acc. to DIN 7721 T2

· Trapezoidal toothing with metric pitch

Select to compare

Configure now
Starting from^∗ ：	6.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Timing belt pulleys with keyless bushings / L / flanged pulley deselectable / aluminium, steel / MTPL

MISUMI

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	9 Days

Tensioner Idlers / toothed / H, L / flanged pulley selectable / single bearing, double bearing / aluminium, steel

MISUMI

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / 8YU / flanged pulley selectable / configurable / aluminium, steel

MISUMI

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	12 Days

Promotional pricing

Flanged wheels for KATAYAMA / MXL, XL, L, S2M, S3M, S5M, T5, T10 / aluminium / KTA

Flanged wheels for KATAYAMA / MXL, XL, L, S2M, S3M, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】

KATAYAMA CHAIN

KANA timing pulley flange is a K timing pulley accessory part, but only the flange is available for sale.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.00 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Timing belt pulleys / S14M / flanged pulley selectable / configurable / steel

MITSUBOSHI BELTING

Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	134.12 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Timing belt pulleys / XL / flanged pulley selectable / bore selectable / steel / L037

MITSUBOSHI BELTING

Easy specification of shaft hole type/diameter. MISUMI can machine the shaft hole for the pulley of the Mitsuboshi belt without drawings for delivery.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.14 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Timing belt pulleys / 8YU / with flanged pulley / steel

UNITTA

Pulley for 8YU type belts

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	76.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Timing belt pulleys / L / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / L050

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	22.73 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / H / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / H200

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	133.34 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0300

MITSUBOSHI BELTING

[Shaft hole, key, tapped processing] Timing pulley that can be used immediately without hassle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	70.84 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV

CONCAR

[Specifications]
・Division(mm): 14

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV

Select to compare

Configure now
Starting from^∗ ：	64.34 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / T10 / with flanged pulley / aluminium / SGI

CONCAR

[Specifications]
・Material: Aluminum
・Division(mm): 10

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / T10 / with flanged pulley / SGI

Select to compare

Configure now
Starting from^∗ ：	11.98 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD

CONCAR

[Specifications]
・Division(mm): 12.7

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD

Select to compare

Configure now
Starting from^∗ ：	9.08 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / L / with flanged pulley / steel, grey cast iron / SGC

CONCAR

[Specifications]
・Division(mm): 9.525

V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / L / with flanged pulley / steel, grey cast iron / SGC

Select to compare

Configure now
Starting from^∗ ：	7.63 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Timing belt pulleys / L / steel, grey cast iron / SGCTB

CONCAR

Select to compare

Configure now
Starting from^∗ ：	8.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Toothed pulley profile HTD 8M, for 50 mm wide belts (22004)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

Select to compare

Configure now
Starting from^∗ ：	20.45 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulley profile HTD 8M, for 25 mm wide belts (22004)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

Select to compare

Configure now
Starting from^∗ ：	14.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Idler pulley, polyamide (22102)

NORELEM

· Tension pulley for drive belts

· Integrated ball bearing

· Ball bearing sealed on both sides

· Maintenance-free thanks to lifetime lubrication

Select to compare

Configure now
Starting from^∗ ：	36.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulley profile HTD 5M, for 15 mm wide belts, for taper bush (22005)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Conical hole for taper clamping bushes

Select to compare

Configure now
Starting from^∗ ：	19.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulley profile HTD 8M, for 30 mm wide belts, for taper bush (22005)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Conical hole for taper clamping bushes

Select to compare

Configure now
Starting from^∗ ：	22.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulley profile HTD 8M, for 20 mm wide belts, for taper bush (22005)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Conical hole for taper clamping bushes

Select to compare

Configure now
Starting from^∗ ：	19.07 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Toothed pulley profile HTD 3M, form P (22004)

NORELEM

· Standard HTD profile

· Semicircular toothing with metric pitch

· Low noise and maintenance

Select to compare

Configure now
Starting from^∗ ：	8.96 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Timing belt pulleys with keyless bushings / L / flanged pulley deselectable / aluminium, steel / HPL

MISUMI

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	85.41 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Timing belt pulleys with keyless bushings / P8M / flanged pulley deselectable / aluminium, steel

MISUMI

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Promotional pricing

Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / aluminium / KTA

Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】

KATAYAMA CHAIN

KANA timing pulley flange is a K timing pulley accessory part, but only the flange is available for sale.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.83 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Belt-shaped
Belt Width Used(mm)
Operating belt width(Inch)
The Number of Teeth
Pulley Shape
Material
Surface Treatment

	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing
Brand	UNITTA	KANEMITSU	MITSUBOSHI BELTING	CONCAR	CONCAR	NORELEM	KATAYAMA CHAIN	MITSUBOSHI BELTING	MITSUBOSHI BELTING	MITSUBOSHI BELTING	UNITTA	KANEMITSU	BANDO	MITSUBOSHI BELTING	MITSUBOSHI BELTING	MITSUBOSHI BELTING	MITSUBOSHI BELTING	CONCAR	CONCAR	NORELEM	MISUMI	MISUMI	MISUMI	KATAYAMA CHAIN	MITSUBOSHI BELTING	MITSUBOSHI BELTING	UNITTA	MITSUBOSHI BELTING	MITSUBOSHI BELTING	MITSUBOSHI BELTING	CONCAR	CONCAR	CONCAR	CONCAR	CONCAR	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	MISUMI	MISUMI	KATAYAMA CHAIN
Product Series	Timing belt pulleys / 14M / flanged pulley selectable / steel	Timing belt pulleys / H / without flanged pulley / steel, grey cast iron / STB	Timing belt pulleys / T10 / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / T10-25	Timing belt pulleys / 3M / with flanged pulley / aluminium / SGS	Timing belt pulleys / T2.5 / with flanged pulley / aluminium / SGG	Toothed pulley profile HTD 8M, for 50 mm wide belts, for taper bush (22005)	Timing belt pulleys / S5M / with flanged pulley / steel / S5M100, S5M150, S5M250	Timing belt pulleys / H / flanged pulley selectable / configurable / cast iron, steel	Timing belt pulleys / L / flanged pulley selectable / configurable / cast iron, steel	Timing belt pulleys / T5 / flanged pulley selectable / configurable / material selectable / burnished, chemically nickel-plated	Timing belt pulleys / MXL / without flanged pulley / aluminium / PxxMXL60, PxxMXL100	Timing belt pulleys / L / without flanged pulley / steel, grey cast iron / STB	Timing belt pulleys / XL / without flanged pulley / steel / 037BF	Timing belt pulleys / T10 / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / T10-15	Timing belt pulleys / S5M / flanged pulley selectable / configurable / aluminium / anodised / S5M0100	Timing belt pulleys / S5M / flanged pulley selectable / configurable / aluminium, steel / anodised, burnished, chemically nickel-plated / S5M0150	Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0400	Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT	Timing belt pulleys / MXL / with flanged pulley / aluminium / SGA	Toothed pulley profile T5, aluminium (22002)	Timing belt pulleys with keyless bushings / L / flanged pulley deselectable / aluminium, steel / MTPL	Tensioner Idlers / toothed / H, L / flanged pulley selectable / single bearing, double bearing / aluminium, steel	Timing belt pulleys / 8YU / flanged pulley selectable / configurable / aluminium, steel	Flanged wheels for KATAYAMA / MXL, XL, L, S2M, S3M, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】	Timing belt pulleys / S14M / flanged pulley selectable / configurable / steel	Timing belt pulleys / XL / flanged pulley selectable / bore selectable / steel / L037	Timing belt pulleys / 8YU / with flanged pulley / steel	Timing belt pulleys / L / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / L050	Timing belt pulleys / H / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / H200	Timing belt pulleys / S8M / flanged pulley selectable / configurable / steel / burnished, chemically nickel-plated / S8M0300	Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV	Timing belt pulleys / T10 / with flanged pulley / aluminium / SGI	Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD	Timing belt pulleys / L / with flanged pulley / steel, grey cast iron / SGC	Timing belt pulleys / L / steel, grey cast iron / SGCTB	Toothed pulley profile HTD 8M, for 50 mm wide belts (22004)	Toothed pulley profile HTD 8M, for 25 mm wide belts (22004)	Idler pulley, polyamide (22102)	Toothed pulley profile HTD 5M, for 15 mm wide belts, for taper bush (22005)	Toothed pulley profile HTD 8M, for 30 mm wide belts, for taper bush (22005)	Toothed pulley profile HTD 8M, for 20 mm wide belts, for taper bush (22005)	Toothed pulley profile HTD 3M, form P (22004)	Timing belt pulleys with keyless bushings / L / flanged pulley deselectable / aluminium, steel / HPL	Timing belt pulleys with keyless bushings / P8M / flanged pulley deselectable / aluminium, steel	Flanged wheels for KATAYAMA / MXL, XL, L, H, S5M, T5, T10 / aluminium / KTA【1-2 Pieces Per Package】
CAD	2D / 3D		2D / 3D				2D / 3D	2D / 3D	2D / 3D		2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D													2D / 3D	2D / 3D	2D / 3D
Starting from^∗	152.17 € *Unit price with basic configuration Volume Discount	101.43 € *Unit price with basic configuration	32.10 € Special price *Unit price with basic configuration Promotional pricing	6.91 € *Unit price with basic configuration	7.58 € *Unit price with basic configuration	29.39 € *Unit price with basic configuration	12.78 € Special price *Unit price with basic configuration Promotional pricing	29.10 € *Unit price with basic configuration Volume Discount	19.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.95 € *Unit price with basic configuration Volume Discount	32.07 € *Unit price with basic configuration Volume Discount	93.62 € *Unit price with basic configuration	19.56 € *Unit price with basic configuration	38.50 € *Unit price with basic configuration	21.73 € *Unit price with basic configuration Volume Discount	23.78 € *Unit price with basic configuration Volume Discount	71.10 € *Unit price with basic configuration Volume Discount	7.26 € *Unit price with basic configuration	11.98 € *Unit price with basic configuration	6.97 € *Unit price with basic configuration	-	34.30 € *Unit price with basic configuration Volume Discount	-	2.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	134.12 € *Unit price with basic configuration Volume Discount	11.14 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	76.67 € *Unit price with basic configuration Volume Discount	22.73 € *Unit price with basic configuration	133.34 € *Unit price with basic configuration	70.84 € *Unit price with basic configuration Volume Discount	64.34 € *Unit price with basic configuration	11.98 € *Unit price with basic configuration	9.08 € *Unit price with basic configuration	7.63 € *Unit price with basic configuration	8.00 € *Unit price with basic configuration	20.45 € *Unit price with basic configuration	14.67 € *Unit price with basic configuration	36.25 € *Unit price with basic configuration	19.25 € *Unit price with basic configuration	22.26 € *Unit price with basic configuration	19.07 € *Unit price with basic configuration	8.96 € *Unit price with basic configuration	85.41 € *Unit price with basic configuration Volume Discount	-	7.83 € Special price *Unit price with basic configuration Promotional pricing
Min. Shipping Days	24 Days	8 Days	Same day	3 Days	3 Days	4 Days	Same day	7 Days	Same day	7 Days	14 Days	8 Days	6 Days	9 Days	9 Days	9 Days	9 Days	3 Days	3 Days	4 Days	9 Days	9 Days	12 Days	Same day	5 Days	Same day	6 Days	9 Days	14 Days	9 Days	3 Days	3 Days	3 Days	3 Days	3 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	9 Days	10 Days	Same day
Specifications																					Order quantities extended (D-JIT)	Order quantities extended (D-JIT)	Order quantities extended (D-JIT)																				Order quantities extended (D-JIT)	Order quantities extended (D-JIT)
Type	Timing pulley	Surface Pressure Pulley	Timing pulley	-	-	-	Timing pulley	Timing pulley	Timing pulley	Timing pulley	Timing Pulley Bar Stock	Surface Pressure Pulley	Timing pulley	Timing pulley	Timing pulley	Timing pulley	Timing pulley	-	-	-	Surface Pressure Pulley	Idlers with Teeth	Timing pulley	Flange	Timing pulley	Timing pulley	Timing pulley	Timing pulley	Timing pulley	Timing pulley	-	-	-	-	-	-	-	-	-	-	-	-	Surface Pressure Pulley	Surface Pressure Pulley	Flange
Belt-shaped	14M	H	T10	-	-	-	S5M	H	L	T5	MXL	L	XL	T10	S5M	S5M	S8M	-	-	-	L	H ～ L	8YU	-	S14M	XL	8YU	L	H	S8M	-	-	-	-	-	-	-	-	-	-	-	-	L	P8M	-
Belt Width Used(mm)	40 ～ 85	27 ～ 32	25	6 ～ 15	4 and 6	-	10 ～ 25	25.4 ～ 50.8	12.7 ～ 25.4	10	100	14	9.5	15	10	15	40	9 ～ 25	6.35	-	12.7 ～ 38.1	12.7 ～ 50.8	15 ～ 25	-	40 ～ 80	9.5	15 ～ 40	12.7	50.8	30	40 ～ 115	16 ～ 50	19.05 ～ 76.2	12.7 ～ 25.4	12.7 ～ 25.4	-	-	-	-	-	-	-	12.7 ～ 38.1	15 ～ 25	-
Operating belt width(Inch)	-	-	-	-	-	-	-	1 ～ 2	0.5 ～ 1	-	-	-	0.37	-	-	-	-	-	-	-	0.5 ～ 1.5	0.5 ～ 2	-	-	-	0.37	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 ～ 1.5	-	-
The Number of Teeth	28 ～ 30	18 ～ 96	14 ～ 40	10 ～ 72	12 ～ 60	-	14 ～ 60	14 ～ 40	10 ～ 44	12 ～ 60	28 ～ 120	24 ～ 28	16 ～ 30	12 ～ 40	14 ～ 60	14 ～ 60	18 ～ 60	12 ～ 72	16 ～ 72	-	14 ～ 72	14 ～ 30	20 ～ 60	-	28 ～ 56	10 ～ 72	20 ～ 72	10 ～ 44	36	18 ～ 60	28 ～ 144	12 ～ 60	14 ～ 120	10 ～ 120	18 ～ 120	-	-	-	-	-	-	-	14 ～ 72	20 ～ 60	-
Pulley Shape	-	B Type / W Shaped / F Type	Shape A / B Type	-	-	-	Shape A / B Type	Shape A / B Type	Shape A / B Type	Shape A / B Type / C Type / W Shaped	-	B Type	B Type	Shape A / B Type	Shape A / B Type	Shape A / B Type	Shape A / B Type	-	-	-	Shape E / F Type	-	Shape A / B Type	-	Shape A / B Type	Shape A / B Type / C Type / W Shaped	-	Shape A / B Type	B Type	Shape A / B Type	-	-	-	-	-	-	-	-	-	-	-	-	Shape E / F Type	Shape E / F Type	-
Material	Steel	Steel	Steel	-	-	-	Steel	Steel	Steel	Steel / Aluminum	Aluminum	Steel	Steel	Steel	Aluminum	Steel / Aluminum	Steel	-	-	-	Steel / Aluminum	Steel / Aluminum	Steel / Aluminum	-	Steel	Steel / Aluminum	Steel	Steel	Steel	Steel	-	-	-	-	-	-	-	-	-	-	-	-	Steel / Aluminum	Steel / Aluminum	-
Surface Treatment	-	N/A	N/A / Black Oxide / Electroless Nickel Plating	-	-	-	N/A	N/A	N/A	N/A	-	N/A	N/A	N/A / Black Oxide / Electroless Nickel Plating	N/A / Clear Anodized Aluminum	N/A / Black Oxide / Clear Anodized Aluminum / Electroless Nickel Plating	N/A / Black Oxide / Electroless Nickel Plating	-	-	-	Black Oxide / Clear Anodized Aluminum / Hard Anodized Aluminum / Electroless Nickel Plating	Black Oxide / Clear Anodized Aluminum / Hard Anodized Aluminum / Electroless Nickel Plating	N/A / Black Oxide / Clear Anodized Aluminum	-	N/A	N/A	-	N/A / Black Oxide / Electroless Nickel Plating	N/A	N/A / Black Oxide / Electroless Nickel Plating	-	-	-	-	-	-	-	-	-	-	-	-	N/A / Black Oxide / Clear Anodized Aluminum / Hard Anodized Aluminum / Electroless Nickel Plating	Black Oxide / Clear Anodized Aluminum / Hard Anodized Aluminum / Electroless Nickel Plating	-

Filter by:

Stock

- Show only stock items
Clear

Belt-shaped
1.5GT

2GT

P2M

S2M

MR2(for PowerGrip® GT®3)

T2.5

3GT

P3M

S3M

MR3(for PowerGrip® GT®3)

5GT

5M

AT5

P5M

S5M

T5

MR5(for PowerGrip® GT®3)

8M

8YU

P8M

S8M

AT10

T10

14M

S14M

H

L

MXL

XL
Details

Clear

Belt Width Used(mm)
3

4

4 and 6

4.8

5

6

6.35

6.4

7

7.9

9

9.5

9.53

10

12

12.7

14

15

16

18

19

19.05

19.1

20

21

25

25.4

26

27

28

30

31

32

36

37

037

38.1

40

50

050

50.8

55

60

62

68

075

76.2

80

85

90

100

115

125
Clear

Operating belt width(Inch)
0.19

0.25

0.31

0.37

0.5

0.75

1

1.5

2

3
Clear

The Number of Teeth
10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

62

64

65

66

68

69

70

71

72

75

80

82

84

90

94

96

100

106

112

116

118

120

136

140

144

168

192
Clear

Pulley Shape
- Shape A
- B Type
- C Type
- W Shaped
- Shape E
- F Type
Images

Clear

Material
- Steel
- Aluminum
- Stainless Steel
- Resin
Clear

Surface Treatment
Clear

Brand

- MISUMI (54)
- Cost Efficient Products ()
Clear

CAD data type

- 2D
- 3D
Clear

Standard shipping days

All

Same day

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less

11 Days or Less
Clear