Clamping Levers（Shape：Shape with Knob）

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024
  • Recommendation

  

  Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Clamp

  HALDER

  [Features]
  · Clamp lever position can be freely changed based on selection.
  · If the thrust washer is removed, this can be used as an infinitely adjustable stopper.
  · Left rotation type can also be provided through special order.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.94 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Eccentric Lever Shaft Pin Included

  HALDER

  [Features]
  · Operating temperature range: plastic grip type maximum 60°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.96 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Quick Clamp, Clamp Lever Included

  HALDER

  [Features]
  · This quick clamp tights work to the fixed surface while also supporting the work facing down.
  · Low profile design and so is suitable for machining the entire surface of the work.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	168.31 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flat Tension Levers

  MISUMI

  [Features] It is a universal flat clamping lever.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamping Catch

  HALDER

  [Features]
  · There is a spacer and washer under the cam disk so the lever can easily be rotated to the desired position even if the securing bolt is tightened.
  · Left rotation type can also be provided through special order.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamp Nut Lever Weld Type

  HALDER

  [Features] cheaper version of DIN99. [Clamp Type] Clamping mechanism, "working direction" horizontal.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Double Side Eccentric Lever Shaft Pin Included

  HALDER

  [Features]
  · Can be clamped in both directions.
  · Used in combination with DIN444 eye bolt M12 (EH22980).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Screw Included

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.
  · The threaded part can be replaced.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamp Nut Lever Weld, Double Lever

  HALDER

  [Features] Double lever, can be operated with both hands. [Type of mounting part] Female thread.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included, Made Of Stainless Steel

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
  · If the lever is released, it returns to meshed status.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Nut Included, Internal Parts, Made Of Stainless Steel

  HALDER

  [Features]
  · Clamping lever enabling adjusting the lever position.
  · Internal parts are made of stainless steel.
  · Has a variety of uses including for medical devices and in the chemical industry.
  · When the lever is pulled up the serrations disengage, letting you freely change the lever position.
  · If the lever is released, it returns to meshed status.
  · The threaded part can be replaced.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Tension Levers / Safety Tension Levers

  MISUMI

  One clamping lever. [Features]Clamp, "clamp type" clamping mechanism, "working direction" horizontal.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat Tension Lever_LFM / LFF

  NABEYA BI-TECH

  [Features]
  · For locations where there is no clear space up or down.
  · The handle position can be adjusted freely.
  · All stainless steel and steel types standard.
  · Large turning radius and clamping force can be obtained with lesser force.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.69 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Locking Lever (LL)

  IMAO CORPORATION

  [Features]
  · Standard type lever handle that can be used widely.
  · For grip, PC type door knob is used

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Switch Lever SL

  KONISHI MFG

  Add S45C sheet material to obtain shape for obtaining torque power easily. The reamer hole is the standard product at the center of the boss, so select the turning radius accordiing to each useage condition.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamping Lever

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Nut Included

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.
  · The threaded part can be replaced.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Nut Included Thrust Bearing Included

  HALDER

  [Features]
  · Clamping lever enabling adjusting the lever position.
  · Internal parts are made of stainless steel.
  · Has a variety of uses including for medical devices and in the chemical industry.
  · When the lever is pulled up the serrations disengage, letting you freely change the lever position.
  · If the lever is released, it returns to meshed status.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flat Tension Levers / With Hexagonal Socket Head / Threaded

  MISUMI

  A flat clamping lever with a hexagon socket head. [Clamp type]Clamping mechanism

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Lever (BJ167, BJ168)

  IMAO CORPORATION

  Standard type cam lever.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	98.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Screw Included, Internal Parts, Stainless Steel

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
  · If the lever is released, it returns to meshed status.
  · Threaded part can be replaced
  · Internal parts are made of stainless steel.
  [Applications]
  · Clamping lever for adjusting lever position.
  · Has a variety of uses including for medical devices and in the chemical industry.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Latch Lever_LZY

  NABEYA BI-TECH

  Clamping lever using spiral latch. Tightening can be adjusted without any steps of moving up and down of lever.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	128.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Control Lever_LCC

  NABEYA BI-TECH

  In combination with a plunger and calculating/positioning lever.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.22 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cam Lever _LZX

  NABEYA BI-TECH

  [Product information]
  · Lever type lever, or leverless
  · Material: Stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	160.33 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Split Hub Lever_LSH

  NABEYA BI-TECH

  You can easily fix it to the shaft simply by tightening the screw.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Tension Lever_LTM / LTF

  NABEYA BI-TECH

  [Features]
  · High strength type of clamping lever.
  · Standardized steel and all stainless steel types.
  · We also manufacture products with customized specifications, such as the turning radius of the lever.
  · Material: finishing lever screw: S45C, tetra-iron oxide coating (black) LTM, LTF. SUS303: LTMS, LTFS. Grip (plastic pole PB): Phenol resin (black)

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.18 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ergo Control Lever (ECL)

  IMAO CORPORATION

  A gentle curve of the arm and polyamide lever handle give a gentle feel to the hands due to the hemispherical finish at the tip.
  
  [Features]
  · A gentle curve of the arm and a hemispherical finish of the tip gives a gentle hand grip, enabling a smooth and powerful operation.
  · The boss hole can be easily covered with the accessory cap after installation.
  · Pilot holes are processed.
  · ECL32 to 54 can be used in a snap system by installing the optional ball & spring.
  · A groove is provided in the boss for the stop pin that limits the lever operating angle to an angle of 125 ±1°

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Control Lever (CL)

  IMAO CORPORATION

  By using the optional CLB, you can also use the snap method with this lever handle.
  
  [Features]
  · The boss hole can be easily covered with the center plate accessory after installation.
  · Optional ball & spring can be installed, and snap method can be used.
  · In order to limit the lever operating angle to 125 ±1°,the groove for the snap pin is provided in the boss.
  · For grip, PG type is used

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.58 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Switch Lever (WL)

  IMAO CORPORATION

  [Features]
  · Standard type lever handle that can be used widely.
  · For grip, PG type is used

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Safe Tension Lever (STF-N, ST-N)

  IMAO CORPORATION

  Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.
  
  [Features]
  · Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
  · Besides the door knob, all is made from stainless steel, so it is robust and strong.
  · In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handling

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.54 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Tension Lever (TLF-N, TL-N)

  IMAO CORPORATION

  In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.
  
  [Features]
  · Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
  · Besides the door knob, all parts are made from stainless steel, so it is robust and strong

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Flat Tension Lever (FTF, FT)

  IMAO CORPORATION

  In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
  
  [Features]
  · Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
  · If interference of the lever occurs during operation, a short lever can be installed and used

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Tension Lever TL, TLF

  KONISHI MFG

  Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	52.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tension Lever (Stainless Steel) TL-sus, TLF-sus

  KONISHI MFG

  Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	90.77 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Flat Tension Lever FTR, FTF

  KONISHI MFG

  Lever used for fixing the position. Since the lever becomes free, when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Controller Lever CL

  KONISHI MFG

  Lever used for fixing the position. Snap holes (2 places) and snap grooves (125 ± 1°) can be used on the back of the boss. The center plate of the boss surface appears as a seal, so it is possible to paste the center plate and make it look beautiful after attaching the control lever to the machine.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Locking Lever L

  KONISHI MFG

  Add SUM22 sheet material to obtain shape for obtaining torque power easily. In the center of the boss, there are standard products with 3 types of holes namely; center hole, reamer hole, and tap hole. Select according to use conditions based on the turning radius of 50/75/100.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.65 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Lever Stainless Steel L-sus

  KONISHI MFG

  Add SUM22 sheet material to obtain shape for obtaining torque power easily. In the center of the boss, there are standard products with 3 types of holes namely; center hole, reamer hole, and tap hole. Select according to use conditions based on the turning radius of 50/75/100.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.47 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Ball Handle BH

  KONISHI MFG

  Can be used for opening and closing using the lever operation.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Module For Securing With Screw Hole For Attaching Lever

  HALDER

  [Features]
  · Enables quick securing to a shaft providing a base to attach the lever.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.28 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

Loading...