Hinges（Page 2）

?* Information on days to ship and prices

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FDT-63A / FDN-63A series / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · Velocity characteristics.
  · The torque of the disc damper changes according to the rotation speed.
  · As per the figure below, generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · Temperature characteristics.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal, the torque also returns to its original value.
  · Temperature characteristics graph is as shown in the figure

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rotary dampers / unidirectional / FFD-30FS / FW / SS / SW series / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rotary dampers / flange type / bidirectional, unidirectional / FYT / FYN-H1 (H2) series / FUJI LATEX

  FUJI LATEX

  This damper is a metal (zinc die-cast) oscillating damper that can adjust characteristics, with high torque. In addition, there are 2 types of characteristics, unidirectional and bi-directional.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  U Type Back Hinge 1 Type B-531

  TAKIGEN

  Same size also available in stainless steel. See B-1531
  
  [Features]
  · An insertion and removal type hinge, it is easy to mount to a frame

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Torque hinges / resistance adjustable / stainless steel / B-1109 / TAKIGEN

  TAKIGEN

  Made from stainless steel for superior corrosion resistance. Since there is no metal friction, metal powder / noise is not generated.
  Hinge torque is not really affected by environment temperature. Initial setting torque can be held for many years.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel 4-Axis Hinge Inner Door Type B-1404

  TAKIGEN

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Multi-link spring hinges / 2-axis / double-acting / B-1118 / TAKIGEN

  TAKIGEN

  Torque is adjustable.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flag hinges / non-perforated / rolled / stainless steel / fine ground / B-1026 / TAKIGEN

  TAKIGEN

  [Features]
  · Made of stainless steel and has excellent corrosion resistance.
  ·The leaves can be removed from the shaft, both upward and downward, making it easy to install.
  · Left and right dual use type.
  [Applications]
  ·For large tide-prevention doors, harbor facilities, large ships, and petroleum complexes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	96.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat hinges / conical countersinks / brass / B-202 / TAKIGEN

  TAKIGEN

  Outer diameter of the shaft is small with the drawing material.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Universal Welding Hinge B-551

  TAKIGEN

  Can be used for various housings with angle mounting.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat hinges / 215° (-35° +180°) / plastic (technopolymer) / CFA / ELESA

  ELESA

  Hinges.
  High-resilience polyamide based (PA) technopolymer, black colour, matte finish.
  AISI 303 stainless steel rotating pin.
  Rotation angles: -35° and +180°.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hinges Plastic, lift-off, left (K0434)

  KIPP

  · Connect two fixed components flexibly to each other
  
  · Axis, stainless steel
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Can be screwed onto all panel elements
  
  · On request: with guide tabs for slots on aluminium profiles

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.31 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Damper Hinges (Zinc Die-Cast)

  MISUMI

  It is a hinge to which a reverse torque is applied and which reduces the load during opening and closing.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Flat hinges / conical countersinks / demountable / POM bush / extruded aluminium / MISUMI

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.07 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Aluminum Lift-Off Hinge Counterbore Hole Type

  MISUMI

  [Features] Aluminium. -Surface treatment available in 3 variants.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rotary dampers / unidirectional / FYN-U1 series / FUJI LATEX

  FUJI LATEX

  This damper is a unidirectional metal (zinc die-cast) oscillating damper that has high torque performance with an outer diameter of ø16 mm.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Corner hinges / conical countersinks / 180° (90° detent) / zinc die-cast / B-845 / TAKIGEN

  TAKIGEN

  [Features]
  · Unlike the stay type, it does not take up space.
  · Click on the stainless steel ball at 90° intervals.
  · Easy to install on surface type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring hinges / closing / rolled / stainless steel / barrel polished / B-1046-G / TAKIGEN

  TAKIGEN

  [Features]
  · An opposite force acts in the closing direction.
  · Conventional product spring fitted hinge B-1046-1 compatible with installation with reverse spring specification.
  · Made of stainless steel, corrosion resistant.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.88 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flag hinges / conical countersunk heads / stainless steel / bright / B-1519 / TAKIGEN

  TAKIGEN

  Made from stainless steel for superior corrosion resistance. fluoropolymer coating is applied to the shaft part for smooth movement.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.92 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Back Hinge for Stainless Steel Heavyweight B-1063

  TAKIGEN

  Cushion is attached to the hinge on the housing side.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Torque hinges / resistance adjustable / POM / BP-150-1 / TAKIGEN

  TAKIGEN

  Hold the door at an arbitrary angle. Can change the tightness of the torque by turning the adjustment bolt.
  Made from flame retardant materials.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.89 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Corner hinges / internal thread / zinc die-cast / FB-735 / TAKIGEN

  TAKIGEN

  Can use any, including flat, corner, back hinge, etc.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.89 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  U-Shaped Stepped Back Hinge B-530

  TAKIGEN

  [Features]
  · Ideal for housings with steps.
  · Bent portion is subjected to drilling process

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Torque hinges / conical countersinks / zinc die-cast / GN 437 / GANTER

  GANTER

  The setscrew in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating range. The rotation of doors and flaps is so inhibited, also preventing the inadvertent movement.
  The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness.
  Owing to the structure and the prestress of the friction cones, the hinge has virtually no radial play and no play at all in axial direction.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat hinges / unperforated / rolled / stainless steel / blank / GN 136 / GANTER

  GANTER

  Stainless Steel-Sheet metal hinges GN 136 are low-cost designs for low-load applications.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Corner Hinges / internal thread, Countersunk Screws / < 205° (-5° +190°) / plastic (Technopolymer) / CFD / ELESA

  ELESA

  Hinges for thin doors.
  High-resilience polyamide based (PA) technopolymer, black colour, matte finish.
  AISI 303 stainless steel rotating pin.
  The hinge is made up of two bodies with different dimensions (a narrow one and a larger one) and can be assembled for example on structures with thin frame or door.
  Rotation angles: -15° and +190°.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat hinges / threaded bolts / stainless steel / 25160.03xx / HALDER

  HALDER

  [Specifications]
  ・Function: adjust|readjust|position|pivoting
  ・Axis: stainless steel
  ・Body: Stainless steel 1.4308
  ・Threaded pin: stainless steel
  
  These hinges are characterised by the compact , robust design and the integrated mounting threads.

  Select to compare

  Configure now
  Starting from∗ ：	35.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Flat hinges / unpunched / weldable / rolled / stainless steel / mirror polished / MISUMI

  MISUMI

  [Features] No holes, welded for assembly, cost effective. Stainless steel.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat hinges / unpunched / weldable / rolled / stainless steel / brushed / MISUMI

  MISUMI

  -Hinge for heavy objects with a sheet thickness of 3 mm or more, welding for assembly / stainless steel.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.55 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat hinges for construction profiles / conical countersinks / demountable / plastic bushing, slot springs / extruded aluminium / MISUMI

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat box hinges / conical countersinks / demountable / POM bush, angle stop / 120°, 135°, 150° / extruded aluminium / MISUMI

  MISUMI

  [Features] Hinge with a structure that does not open beyond a certain angle. [Aluminium)

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat hinges for structural profiles / Taper countersinks / grooved pins / Nylon / MISUMI

  MISUMI

  [Features] One hinge, black, compact type. [Material] Nylon.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FDT-70A / FDN-70A series / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · The torque of the disc damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · The viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal the torque also returns to the original value

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.35 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rotary dampers / flanged / unidirectional / FFD-25FS / FW / SS / SW-Series / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rotary dampers / flange type / bidirectional, unidirectional / FRT / FRN-C2 series / FUJI LATEX

  FUJI LATEX

  This small damper is available in 2 types of torque, one that works in both directions and the other in one direction. We also offer both types with and without gear.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / standard / TD27 / 28 / TOK BEARING

  TOK BEARING

  [Features]
  · With torque adjustment equipment, torque adjustment is easy.
  · Combined with a dedicated blanket, it can be used as a hinge.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flanged Shape / TD60 / TOK BEARING

  TOK BEARING

  By original design, the body width is 10.9 (mm), and allowable torque is 1.96N m. Excellent response quality. *The CAD data for this series is currently being revised. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.45 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel L Type Back Hinge (2 Pipe) B-1525

  TAKIGEN

  [Product Information]
  · <Common items>
  · Body type: Rear Hinge, Concealed Hinge
  · Length L (mm): 70
  · Material: Stainless steel plate (SUS304)
  · Surface finish: Fabric
  · Width W (mm): 22
  · Plate thickness t (mm): 3

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel U Bend Back Hinge B-1540

  TAKIGEN

  [Product Information]
  · <Common items>
  · Body type: Rear Hinge, Concealed Hinge
  · Material: Stainless steel plate (SUS304)
  · Surface finish: Fabric

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-4 / TAKIGEN

  TAKIGEN

  [Features]
  · It is made of all stainless steel and has excellent corrosion resistance

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spring hinges / opening / rolled / stainless steel / barrel polished / B-1046 / TAKIGEN

  TAKIGEN

  Classic spring hinge. Made from stainless steel for superior corrosion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat hinges / conical countersinks / asymmetrical / rolled / stainless steel, seawater resistant / barrel polished / B-1234 / TAKIGEN

  TAKIGEN

  Stainless steel, excellent in corrosion resistance, SUS316, is used for blades.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.08 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Step hinges / rolled / stainless steel / mirror polished / B-1028 / TAKIGEN

  TAKIGEN

  Suitable for enclosures with steps.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.61 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat hinges / unperforated / rolled / stainless steel / mirror polished / B-1078 / TAKIGEN

  TAKIGEN

  Made from stainless steel for superior corrosion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat hinges / conical countersinks / rolled / stainless steel / fine ground / B-1100 / TAKIGEN

  TAKIGEN

  Made from stainless steel for superior corrosion resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...