FRL Units（Connection Diameter：G1/8）

?* Information on days to ship and prices

• • Promotional pricing

  

  Filter Regulator AW20 to 60-B, Filter Regulator With Backflow Function AW20K to 60K-B

  SMC

  Filter regulators and filter regulators with backflow function, with both filter and regulator integrated in one unit.
  [Features]
  · Helps save on space, and requires less piping.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  AW10-40-A, AW Filter / Regulator Combination

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.02 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  AC20A-B to AC60A-B, Modular Type, Filter Regulator + Lubricator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.19 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mist Separator Regulator AWM20 to 40/Micro Mist Separator Regulator AWD20 to 40

  SMC

  SMC Mist Separator Regulator.
  [Features]
  · The AWM Series combines a regulator and mist separator into one unit. Use for clean air blowing applications. (Filtration: 0.3 μm)
  · The AWD Series combines a regulator and micro-sized mist separator into one unit. Use for ultra-clean air blowing applications. (Filtration: 0.01 μm)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	60.32 €
  	Special price
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Modular type filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  AC10-40-A (FRL), Modular Type, Air Filter + Regulator + Lubricator

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.06 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  AC10A-40A-A (FRL), Modular Type, Filter Regulator + Lubricator

  SMC

  Air Combination Filter Regulator + Lubricator with a bowl that is completely covered by transparent bowl guard.
  [Features]
  · The inside can be seen from all angles (360°).
  · The bowl is protected from the external environment, ensuring high levels of safety.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  3-Port Valve for Releasing Residual Pressure With Keyhole (Double Action Type) VHS2510/3510/4510/5510

  SMC

  With this OSHA compliant Pressure Relief 3-Port Valve (Double Action) With Locking Holes, the supply and exhaust status of air flow can be checked at a glance.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · A specification in which when residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.
  · The double action type is structured so that the handle has to be pushed down before turning, helping prevent accidental operation.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.40 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  AC20D-B to AC40D-B, Modular Type, Filter Regulator + Mist Separator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.53 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  AC Series Air Combination Piping Adapter

  SMC

  A piping adapter that allows for easy installation and removal of the component without removing piping.
  [Features]
  · Attachment for AC Series Air Combination.
  · E100-M5-A applicable model: AC10□-A.
  · E200-□01-A, 02-A, 03-A applicable model: AC20□-A.
  · E300-□02-A, 03-A, 04-A applicable models: AC25□-A, AC30□-A.
  · E400-□02-A, 03-A, 04-A, □06-A applicable model: AC40□-A.
  · E500-□06-A applicable model: AC40□-06-A.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.13 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Modular Type FM Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Modular Type FRL Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Compact modularization: Design for each F.R.L device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Lightweight: The material combination allows for both strength and low weight.
  · Long life element: The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Almost no clogs. No rust concerns.
  · Space-saving embedded pressure meter: Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	17 Days

• 

  Modular Type WL Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  Modular Type WM Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  AC10B-40B-A (FRL), Modular Type, Air Filter + Regulator

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.97 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-A to AC40C-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	115.61 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  AC20D-40D-A (FRL), Modular Type, Filter Regulator + Mist Separator

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.53 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  3-Port Valve for Releasing Residual Pressure With Keyhole (Single Action) VHS20/30/40/50

  SMC

  Conforming To OSHA Standard, Pressure Relief 3-Port Valve (Single Action) With Locking Holes by SMC.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · Designed so that the supply and exhaust status of the air flow can be checked at a glance.
  · When residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.53 €
  	Special price
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  AC20-B to AC60-B, Modular Type, Air Filter + Regulator + Lubricator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.06 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  AC20B-B to AC60B-B, Modular Type, Air Filter + Regulator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.97 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  AC20C-B to AC40C-B, Modular Type, Air Filter + Mist Separator + Regulator

  SMC

  Air combination with better visibility and environmental resistance.
  [Features]
  · The bowl is completely covered by a transparent bowl guard.
  · The inside can be seen from all angles (360°).
  · The bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  · The element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	83.66 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

Loading...