Tightening Fittings（Thread Nominal：3/8）

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel EN 1.4401 Equiv. Insert Fittings, Male Connector, KFG2H Series

  SMC

  [Features]
  · Compact, weight reduced.
  · Lubrication-free.
  · It can be used with steam.
  · Compliant with the Food Sanitation Act of Japan.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.69 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Quick Seal Series Insert Type (Brass) Connector (Inch Size)

  NITTA

  A 3-point brass connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel EN 1.4401 Equiv. Insert Fittings, Male Elbow, KFG2L Series

  SMC

  [Features]
  · Compact, weight reduced.
  · Lubrication-free.
  · It can be used with steam.
  · Compliant with the Food Sanitation Act of Japan.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.94 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  H, Self-align Fitting - Male Connector

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · A non-directional type metal sleeve tightening fitting.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  · Can be used with soft copper pipes.
  [Applications]
  · Used for piping in the same direction from female threads.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Quick Seal Series Insert Type (Brass) Connector (mm Size)

  NITTA

  It consists of three parts: brass fitting body of connector (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.43 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Couplings with Tube Insert / Nut and Sleeve Integrated / Connectors

  MISUMI

  [Features] The media used are air, water or oil, connection fitting with inserts for pipes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  QuickSeal Series Insertion Type (Brass Specifications) 90° Elbow (mm Size)

  NITTA

  This 90° brass elbow (mm size) consists of three parts: fitting body, nut, and sleeve. The fitting body and insert come integrated. Also, it is superb in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Tee (Inch Size)

  NITTA

  A 3-point brass swivel tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.32 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Quick Seal Series, Insert Type (Stainless Steel Specifications), Connector (mm Size)

  NITTA

  A 3-point stainless steel specification connector (mm sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also demonstrates excellent performance at negative pressures.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrate excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KFT, Insert Fitting, Male Branch Tee

  SMC

  [Features] Used for branching at 90° angles from female threads on both sides. [Material] -EN CW614N Equiv.+EN CW617N Equiv..

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.53 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Junron Brass Nipple Joint

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
  The tube insert allows for secure connection of a sleeve and a cap nut.
  With collar thread seal for each R (PT) thread size.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Chemifit CP Series Connectors【5 Pieces Per Package】

  NITTA

  Connectors are injection molded for a smooth inner surface. Does not generate dust or pollution. Uses a special polypropylene resin.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chemifit CP Series, Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.82 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  KFH, Insert Fitting, Male Connector

  SMC

  A general model used for piping in the same direction from the female thread section. [Sleeve material] Nylon/Brass

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.32 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel EN 1.4401 Equiv. Insert Fittings, Swivel Elbow, KFG2V Series

  SMC

  [Features]
  · Compact, weight reduced.
  · Lubrication-free.
  · It can be used with steam.
  · Compliant with the Food Sanitation Act of Japan.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.84 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Couplings for Tubes - Nut/Sleeve Integrated, Elbow

  MISUMI

  [Features]·Couplings for tubes with integrated nut and sleeve. With nut and sleeve in one piece, coupling does not twist the tube being connected. The applicable fluids are air and water.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Brass Tightening Fitting - Straight - for Sputtering Resistance

  NIHON PISCO

  Special brass is used for metal body to greatly improve corrosion resistance to water.
  
  [Features]
  · Special brass is used for metal body.
  · Corrosion resistance to water has been greatly increased.
  · Ideal for use in the automobile industry and for mold temperature control.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · A wide variety is available to support a wide range of applications.
  · 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.25 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  for Sputtering Resistant, Brass Tightening Fitting, Female Bulkhead Straight

  NIHON PISCO

  Special brass is used for the metal body. Corrosion resistance to water is greatly improved. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.37 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Corrosion Resistant SUS316 Tighten Fitting Branch Tee

  NIHON PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.74 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Hose Fitting, Hose Nipple

  CHIYODA TSUSHO

  A hose nipple with high pull-out strength.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hose Fitting, Universal Nipple

  CHIYODA TSUSHO

  A cap-nut universal nipple with high pull-out strength.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Junron Stainless Steel Fitting Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.81 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Elbow Fitting

  JUNKOSHA

  Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Steel Fitting Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	58.61 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Quick Seal Series - Insert Type (Brass) - Female Connector (mm Size)

  NITTA

  A brass female connector (millimeter sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.07 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Nylon Coil Tube Dedicated Type Connector

  NITTA

  It consists of three parts: fitting body of connector, nut, and sleeve. Fitting dedicated to nylon coil tubes.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.97 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Quick Seal Series Insert Type (Brass) Female Connector (Inch Size)

  NITTA

  A 3-point brass female connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.99 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KFH, Insert Fitting, Male Connector

  SMC

  A general model used for piping in the direction perpendicular to the female thread section. [Sleeve material] Nylon/Brass

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  KFE, Insert Fitting, Bulkhead Connector

  SMC

  [Features] Used as wire-to-wire connection between male thread and tube for panel mounting, etc. [Material] -EN CW614N Equiv. [Material] -EN CW614N Equiv.+EN CW617N Equiv..

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.95 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Insert Fittings KF Series, Swivel Extended Elbow KFW

  SMC

  [Features]
  · Used for piping in directions perpendicular to the female thread.
  · Extended swivel type that can swivel in any direction, facilitating three-dimensional piping.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.73 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  DL, Self-align Fitting - Male Elbow

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for piping in the same direction from female threads.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  DH, Self-align Fitting - Female Connector

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for piping from male threads, such as on pressure gauges.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.53 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  DT, Self-align Fitting - Male Branch Tee, Union Tee

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.92 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Couplings for Tubes / Nut and Sleeve Integrated / Straight

  MISUMI

  The media used are air and water. -Straight tube fitting with integrated nut and socket for tubes.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Tees

  MISUMI

  The media used are air and water. T-piece with integrated nut and sleeve for pipes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Nipples

  MISUMI

  The media used are air and water. -Integrated nipple fitting with nut and sleeve for tubes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Sockets

  MISUMI

  The media used are air and water. -Integrated nipple fitting with nut and sleeve for hoses.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.55 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Couplings for Tubes / Nut and Sleeve Integrated / Half Unions

  MISUMI

  [The media used are air and water. -Nut and sleeve with integrated half-fitting for tubes.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.99 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Couplings with Tube Insert / Nut and Sleeve Integrated / Elbows

  MISUMI

  Media used are air, water or oil, elbow fitting with tube insert.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Brass Tightening Coupler Elbow for Sputter Resistance

  NIHON PISCO

  Special brass is used for metal body to greatly improve corrosion resistance to water.
  
  [Features]
  · Special brass is used for metal body.
  · Corrosion resistance to water has been greatly increased.
  · Ideal for use in the automobile industry and for mold temperature control.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · A wide variety is available to support a wide range of applications.
  · 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Brass Tightening Fitting for Sputter Resistance Female Straight

  NIHON PISCO

  A special brass is used for the metal body. Resistance to water corrosion is greatly improved. *The CAD data for this Series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Special brass is used for the metal body.
  · The resistance to water corrosion is greatly improved.
  · Optimally suited to the automobile industry and adjusting mold temperatures.
  · A sleeve-less design. Therefore, forgetting to attach or losing sleeves will never happen again. Suitable for a wide range of various applications.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.31 €
  	Special price
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Corrosion Resistant SUS316 Tightening Fitting, Elbow

  NIHON PISCO

  All materials use SUS316 for excellent rust resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  for Corrosion Resistance - Tightening Fittings SUS316 - Straight

  NIHON PISCO

  SUS316 is used to provide all materials with excellent corrosion resistance.
  
  [Features]
  · SUS316 is used to provide all materials with excellent corrosion resistance.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · Air cleaned and packaged in a Class 1000 clean room .
  · Added inch sizes.
  · Improved selection.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.87 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Corrosion Resistant SUS316 Tighten Fitting Tee

  NIHON PISCO

  All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.82 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Corrosion Resistant SUS316 Compression Fitting Female Straight

  NIHON PISCO

  Totally made of corrosion-resistant SUS316.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...