Kategori

Se mer

Filtreringsvillkor

Rensa alla

Lager
Visa endast lagervaror

Type

Straight

Cutting Service Usage

Provided
Not Provided

Outer Diameter D(Ø)

1.6
1.7
1.8
2
2.5
3
3.17
3.18
3.2
3.5
4
4.5
4.76
6
6.35
7
7.94
8
8.2
9
9.53
10
10.2
11
12
12.2
12.5
12.7
13
14
14.2
15
15.88
16
19
20
25
25.4

O.D. [Distinction]

* ~2 represents over 5, and 3 or less.

Up to 2
Up to 3
Up to 4
Up to 5
Up to 6
Up to 7
Up to 8
Up to 9
Up to 10
Up to 15
Up to 20
Up to 30
Up to 40

Inner Diameter d(Ø)

0.7
0.8
0.9
1
1.2
1.5
1.59
1.6
2
2.36
2.4
2.5
2.7
2.99
3
3.17
3.48
3.5
3.95
4
4.15
4.35
4.5
4.57
5
5.9
5.99
6
6.3
6.33
6.5
6.99
7
7.5
8
8.3
8.5
9
9.5
9.52
9.56
10
10.7
11
12
12.5
12.7
12.8
13
15
16
22
22.2
b:NA

Material

Urethane
Nylon
Fluororesin
Polyamide
Fluororubber
Silicone Rubber
Polyolefin Resin
Others
Nylon/Fluoropolymer

I.D. [Distinction]

* ~2 represents over 5, and 3 or less.

1 or Less
Up to 2
Up to 3
Up to 4
Up to 5
Up to 6
Up to 7
Up to 8
Up to 9
Up to 10
Up to 15
Up to 20
Up to 30

Applicable Fluid

Water
Air
Chemical
General Hydraulic Oil
Thermal Media Oil

Operating Environment

Standard
Clean Environment
Corrosion Resistant
Antistatic
Sputter Resistant
Mold Cooling
Water Resistance
Pressure Resistance
For Vacuum
Heat Resistance
Abrasion Resistance
Oil Resistance
Low Temp. Resistance
Weather Resistance
Ozone Resistance
Sulfur Resistance
Chemical Resistance

Color

Black
White
Milky White
Transparent (including non-white colors)
Red
Blue
Yellow
Green
Orange
Ocher
Gray
Multi Color
Others

Number of Bores(Core)

Material, Urethane

Polyurethane
Soft Polyurethane
Conductive, Antistatic Urethane
Soft Polyurethane
Incombustible Polyurethane
Water Resistant Polyurethane
Thermoplastic Polyurethane

Material, Fluororesin

Flexible Fluororesin
Soft Fluororesin
Standard Fluororesin
Others

Material: Nylon

Soft Nylon
Pressure Resistant Nylon
Nylon 11
Nylon 12
Nylon (Polyamide)
Others

Tillverkare

CAD

Tubes (Type: Straight)

107 poster

* Information om dagar till leverans, fraktkostnader och priser

Lista

Foto

Jämför specifikationer

Antal poster att visa:Sortera efter:

Avsändningsdatum:

Nästa

KAMPANJFÖRSÄLJNING

SMC

Polyurethane Tubing TU / TIUB Series

[Features]・ Flexible.・ Polyurethane tube.・ Added 21 new colors.[Applications]・ For general pneumatic piping.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 16	Up to 2 ～ Up to 20	2 ～ 10	Urethane	Up to 2 ～ Up to 10	Water / Air	Standard

Ordinarie pris (exklusive MOMS):

5.98 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount
Order quantities extended (D-JIT)

MISUMI

Tubes / Water Resisting Polyurethane

[Features] A polyurethane tube with high water resistance.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 16	-	2.5 ～ 11	Urethane	-	Water / Air	Water Resistance / Abrasion Resistance

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

SMC

TRTU, Flame Resistant Three-Layer Polurethane Tubing

Triple-layered, flame-resistant (equivalent to UL-94 standard V-0) polyurethane tubing, TRTU series. [Features]· Includes an aluminum layer between the outer sheath and the inner tube for improved spatter resistance. [Applications]· Suitable for air and water piping in environments with sparks from arc welders, etc.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	6 ～ 12	Up to 6 ～ Up to 15	4 ～ 8	Urethane	Up to 4 ～ Up to 8	Water / Air	Standard / Sputter Resistant

Ordinarie pris (exklusive MOMS):

96.16 €～

Ordinarie avsändningsdatum:

3 arbetsdagar

Konfigurera

Volume Discount

MISUMI

Tubes / Pressure Resistance Nylon

[Features] A pressure-resistant nylon tube for lubrication and hydraulic lines.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 16	-	2.5 ～ 12.8	Nylon	-	Water / Air / General Hydraulic Oil	Pressure Resistance

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount

NIHON PISCO

General Piping Straight Nylon Tube

A tube with excellent pressure, abrasion, and cold resistance. Available in a total of 9 colors. *Tube can be cut (black).[Features] Excellent pressure, abrasion, and cold resistance. The NB tube can be used with hot water, or heating medium oil. Strong against bending fatigue, and is stable for use over long periods. The total number of color variations for the NB tube has been expanded to 12. A total of 9 color variations are available for NA tubes.· A cut mark is displayed at intervals of 500 mm, which is useful when cutting the tube. We also can manufacture long length tubes to order.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	3.18 ～ 16	Up to 4 ～ Up to 20	2 ～ 13	Nylon	Up to 2 ～ Up to 15	Water / Air	Standard / Water Resistance / Pressure Resistance / Abrasion Resistance

Ordinarie pris (exklusive MOMS):

0.79 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

AOI

Multi-Layer Fluorine Tube, REF5

[Features]・ By adopting FEP for the inner layer, the manufacturer has achieved the same cleaning performance and liquid repellency as the single layer fluorine tube.・ In addition, since it has a high moisture barrier property, it can also be used for fluids that react with moisture (such as paint curing agents).・ The outer layer nylon elastomer has a high gas barrier property and can reduce air entrainment (bubble generation) in the fluid.・ Also, since it is hard to break and is resistant to wear and scratches, it can be used for piping such as robots.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	4.76 ～ 15.88	Up to 4 ～ Up to 20	3.48 ～ 12.7	Nylon/Fluoropolymer	Up to 3 ～ Up to 15	Water / Air / General Hydraulic Oil	Chemical Resistance

Ordinarie pris (exklusive MOMS):

31.59 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Silicone Tube 10 m/20 m (The Length Can Be Specified in Increments of 0.5 mm)

Volume Discount

MISUMI

Silicone Tube 10 m/20 m (The Length Can Be Specified in Increments of 0.5 mm)

[Features] This silicone hose complies with the Japanese Food Hygiene Law.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 12	-	2 ～ 9	Silicone Rubber	-	Water	Heat Resistance / Low Temp. Resistance

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Volume Discount

NICHIAS

TOMBO No. 9003 Nylon PTFE Tube

Fluororesin (PTFE) tube. Excellent chemical resistance, heat resistance, and weatherproof performance.[Features]· Chemical permeation is minimal (reduced to approximately 60% of PFA-HG (measured with hydrochloric acid, nitrogen, and oxygen)).· The amount of permeation for a PFA-HG tube is reduced to approximately 50% that of a standard PFA tube (HCl comparison).· Elution of fluorine ions is minimal (equivalent to a PFA-HG tube).· The inner surface of the tube is smooth (Equivalent to a PFA-HG tube).

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	1.7 ～ 14	Up to 2 ～ Up to 15	0.7 ～ 12.5	Fluororesin	1 or Less ～ Up to 15	Water / Air / Chemical	Standard / Antistatic / Heat Resistance / Weather Resistance / Chemical Resistance

Ordinarie pris (exklusive MOMS):

43.29 €～

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

JUNKOSHA

Junflon High-Barrier PFA Tube

A hybrid tube that uses a fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer. The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .[Features]· A fluoropolymer tube with superior barrier properties.· A hybrid tube that uses fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer.· The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .· The barrier properties of the fluoropolymer is superior to the barrier properties of the acids (hydrochloric acid, nitric acid, etc.) and ammonia.· Suppresses the permeation of acids in comparison to conventional PFA tubing.· Reduces adverse environmental impacts on the wider environment.· The transparency of the fluid can be maintained over a long period of time.· The mechanical properties are equivalent to a conventional PFA tubing.· This product is manufactured from raw material input to the molding and packaging in a consistently managed clean environment.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	6 ～ 25.4	Up to 6 ～ Up to 30	3.95 ～ 22.2	Fluororesin	Up to 4 ～ Up to 30	Water / Air / Chemical	Standard / Corrosion Resistant / Water Resistance / Heat Resistance / Chemical Resistance

Ordinarie pris (exklusive MOMS):

56.78 €～

Ordinarie avsändningsdatum:

12 arbetsdagar

Konfigurera

CHELIC

PU Tube

This is an air polyester tube for fluids. The tube is available in lengths of 100 m and 200 m. Outer diameter of the tube can be selected from ⌀4, 6, 8, 10 and 12. Moreover you can select a color for the tube from black, blue, orange and transparent. A partial inventory of the product has been kept, hence same day delivery is possible. This is a small jig cylinder made by a Taiwanese company established in 1988 that specializes in pneumatic devices/accessories. Its sales are expanding in countries around the world, and its products have been well-received worldwide.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	-	4 ～ 12	Up to 4 ～ Up to 15	2.5 ～ 8	Urethane	Up to 3 ～ Up to 8	Water / Air	Standard

Ordinarie pris (exklusive MOMS):

41.18 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

SMC

TLM, Fluoropolymer Tubing, Metric Size

Superior heat resistance: fluoropolymer tubing (PFA) metric size, TLM series. [Features]· Uses highly chemical-resistant fluoropolymer. [Applications]· Used in the manufacture of solar cells, liquid crystals, hard disk drives, and in the healthcare and food industries.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	2 ～ 25	Up to 2 ～ Up to 30	1 ～ 22	Fluororesin	1 or Less ～ Up to 30	Water / Air / Chemical	Standard / Heat Resistance / Chemical Resistance

Ordinarie pris (exklusive MOMS):

4.06 €～

Ordinarie avsändningsdatum:

4 arbetsdagar

Konfigurera

KAMPANJFÖRSÄLJNING

SMC

Nylon Tubing T / TIA Series

Nylon tubing for general pneumatic tubing. [Features]· Maximum operating pressure 3.0 MPa or less (T0604, at 20°C).[Applications]· Fluid: air, water.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 16	Up to 4 ～ Up to 20	2.5 ～ 13	Polyolefin Resin	Up to 3 ～ Up to 15	Water / Air	Standard

Ordinarie pris (exklusive MOMS):

9.61 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

SMC

Soft Fluoropolymer Tubing TD / TID Series

Compatible with Japan's Food Sanitation Law.[Features]・ Flexibility: About 20% improvement・ Operating temperature is MAX.260°C[Applications]・ Ideal for use when flexibility is required

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 12	Up to 4 ～ Up to 15	2.5 ～ 9	Fluororesin	Up to 3 ～ Up to 10	Water / Air	Standard / Chemical Resistance

Ordinarie pris (exklusive MOMS):

35.58 €～

Ordinarie avsändningsdatum:

4 arbetsdagar

Konfigurera

UP-9102-F1 Series for Air Fiber Dedicated Fitting

Volume Discount

CKD

UP-9102-F1 Series for Air Fiber Dedicated Fitting

An ultra-fine tube with an outer diameter of φ1.8 and minimum bending radius of 4mm.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	1.8	Up to 2	1	Urethane	1 or Less	Air	Antistatic / For Vacuum

Ordinarie pris (exklusive MOMS):

121.97 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

CHIYODA TSUSHO

P-Flex Series, Hot Water Resistant Polyurethane Tubes

Resistant to hot water and optimal for cooling water piping. Can also be used for air.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	8 ～ 12	Up to 8 ～ Up to 15	5 ～ 8	Urethane	Up to 5 ～ Up to 8	Water / Air	Standard / Water Resistance / For Vacuum / Heat Resistance

Ordinarie pris (exklusive MOMS):

102.23 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Junron U (Polyurethane Tube), Junron UF (Water-Resistant Soft Polyurethane Tube)

KAMPANJFÖRSÄLJNING
Volume Discount

JUNKOSHA

Junron U (Polyurethane Tube), Junron UF (Water-Resistant Soft Polyurethane Tube)

Excellent mechanical strength and wear resistance.[Features]· Excellent mechanical strength and pressure/wear resistance.· Excellent performance at low and high temperatures.· Resin continuous no-load operation temperature range: -40 ~ +80°C.· Flexible and with a high impact resilience rate.· No risk of poisonous substances being released.· Minimal bending radius. Excellent workability.· *For water resistance, please use Junlon UF.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	4 ～ 12	Up to 4 ～ Up to 15	2.5 ～ 8	Urethane	Up to 3 ～ Up to 8	Water / Air	Standard / Water Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance

Ordinarie pris (exklusive MOMS):

19.72 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Fluoropolymer Tubing (PFA) Inch Size, TILM Series

KAMPANJFÖRSÄLJNING

SMC

Fluoropolymer Tubing (PFA) Inch Size, TILM Series

Fluoropolymer tubing (PFA) with superior heat resistance, inch size, TILM Series.[Features]・ The material is fluoropolymer, which has excellent chemical resistance. It also has excellent heat resistance, making it suitable for a wide range of applications.[Applications]・ Solar battery manufacturing field, liquid crystal manufacturing field, HDD manufacturing field, medical field, food field.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	-	Up to 4 ～ Up to 40	-	Fluororesin	Up to 2 ～ Up to 30	Water / Air / Chemical	Standard / Heat Resistance / Chemical Resistance

Ordinarie pris (exklusive MOMS):

5.56 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Volume Discount

MISUMI

Air Hoses / Standard

[Features] This air hose is extremely lightweight and has high resistance to cold and oil.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	10 ～ 12.5	-	6.5 ～ 8.5	Urethane	-	Air	Oil Resistance / Low Temp. Resistance

Ordinarie pris (exklusive MOMS):

42.44 €～

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

SMC

Polyurethane Tubing 10-TU Series

Flexible polyurethane tubing. [Features]· Flexible. 0.8 MPa or less type (at 20°C).· Polyurethane tubing. [Applications]· For general pneumatic tubing.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 12	Up to 4 ～ Up to 15	2 ～ 8	Urethane	Up to 2 ～ Up to 8	Water / Air	Standard / Clean Environment

Ordinarie pris (exklusive MOMS):

12.97 €～

Ordinarie avsändningsdatum:

26 arbetsdagar

Konfigurera

SMC
TRBU, Flame Resistant Double Layer Polyurethane Tubing
Double-layer polyurethane tubing. [Features]· Maximum operating pressure 0.8 MPa or less (at 20°C).· For use in areas where spatter occurs. Flame retardant (equivalent to UL-94 standard V-0).· Superior resiliency even when compared to nylon tubing.
Mer information
CAD:
2D
/3D
Type Cutting Service Usage Outer Diameter D(Ø) O.D. [Distinction] Inner Diameter d(Ø) Material I.D. [Distinction] Applicable Fluid Operating Environment
Straight Not Provided - - - - - Water / Air Standard
Ordinarie pris (exklusive MOMS):
63.06 €～
Ordinarie avsändningsdatum:
4 arbetsdagar
Konfigurera

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	-	-	-	-	-	Water / Air	Standard

SMC

Fluoropolymer Tubing TL / TIL Series

Fluoropolymer tubing with a highly smooth internal surface. [Features]· Maximum operating pressure 1.0 MPa or less (at 20°C).· Maximum operating temperature: 260°C (varies depending on the conditions). [Applications]· Suitable for applications requiring a small amount of elution of fluorine ions.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 10	Up to 4 ～ Up to 30	-	Fluororesin	-	Water / Chemical	Standard / Heat Resistance / Chemical Resistance

Ordinarie pris (exklusive MOMS):

12.10 €～

Ordinarie avsändningsdatum:

4 arbetsdagar

Konfigurera

Volume Discount

MISUMI

Tubes / Polyolefin Type

The hose is suitable for applications in fields such as the food and beverage industry, physical and chemical sciences, etc.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 12	-	2.5 ～ 8	Polyolefin Resin	-	Water / Air	Water Resistance

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Volume Discount

MISUMI

Tubes / Antistatic Type

[Features] Hose suitable for piping in environments where static electricity should be avoided.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 12	-	2.5 ～ 8	Urethane	-	Air	Antistatic

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Volume Discount

MISUMI

Tubes / Fluoro Rubber Type

[Features] Tube with excellent resistance to heat, oil, weather, chemicals, etc.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 10	-	2 ～ 8	Fluororubber	-	Water / Air / Chemical / General Hydraulic Oil	Heat Resistance / Oil Resistance / Weather Resistance

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

- Volume Discount
MISUMI
Air Hoses / High-Flex
[Features] It is soft and can be easily inserted into metal fittings. It does not get stuck with oil.
Mer information
CAD:
2D
/3D
Type Cutting Service Usage Outer Diameter D(Ø) O.D. [Distinction] Inner Diameter d(Ø) Material I.D. [Distinction] Applicable Fluid Operating Environment
Straight Not Provided 13 ～ 15 - 6.5 ～ 8 Others - Air -
Ordinarie pris (exklusive MOMS):
27.07 €～
Ordinarie avsändningsdatum:
5 arbetsdagar
Konfigurera

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	13 ～ 15	-	6.5 ～ 8	Others	-	Air	-

CHIYODA TSUSHO

Multi-Straight Tube

A straight tube that uses a variety of different color variations to make pipe identification easy.[Features]· Directly inherits the features of TP tubing.· Can be connected using a one touch fitting without leaving marks during peeling via special welding .· Pipe identification is made easy through color variation wherein a different color can be used for each pipe.· Ideal for locations where horizontal piping is difficult or when many pipes are used

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	4 ～ 12	Up to 4 ～ Up to 15	2 ～ 8	Urethane	Up to 2 ～ Up to 8	Air	Standard / For Vacuum / Abrasion Resistance / Oil Resistance

Ordinarie pris (exklusive MOMS):

76.17 €～

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Junron A (Nylon Tube), Junron AS1 (Inch Series Soft Nylon Tube)

KAMPANJFÖRSÄLJNING
Volume Discount

JUNKOSHA

Junron A (Nylon Tube), Junron AS1 (Inch Series Soft Nylon Tube)

Excellent mechanical strength, as well as pressure, wear resistance, and flexural fatigue resistance. Excels in heat and low temperature resistance. High flexibility. Excels in oil and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 12.7	Up to 4 ～ Up to 15	2.36 ～ 9.56	Nylon	Up to 3 ～ Up to 10	Water / Air / General Hydraulic Oil	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Oil Resistance / Low Temp. Resistance / Chemical Resistance

Ordinarie pris (exklusive MOMS):

11.97 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING

SMC

Soft Nylon Tubing TS / TISA Series

Pliable soft nylon tubing. [Features]· Maximum operating pressure 1.0 MPa or less (at 20°C).[Applications]· For general pneumatic tubing.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 16	Up to 4 ～ Up to 20	2.5 ～ 12	Polyolefin Resin	Up to 3 ～ Up to 15	Water / Air	Standard

Ordinarie pris (exklusive MOMS):

21.32 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING

SMC

TPS, Clean Tube (Soft Polyolefin Tube)

Clean tubing: soft polyolefin tubing in a variety of colors. [Features]· Maximum operating pressure 0.7 MPa (at 20°C).[Applications]· Fluid: Air, nitrogen gas, water, DI water (pure water).

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	4 ～ 12	Up to 4 ～ Up to 15	2.5 ～ 8	Polyolefin Resin	Up to 3 ～ Up to 8	Water / Air	Standard

Ordinarie pris (exklusive MOMS):

28.90 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING

SMC

TUS, Soft Polyurethane Tubing, Metric

Extremely flexible soft polyurethane tubing. [Features]· Suitable for piping in confined spaces.· Maximum operating pressure 0.6 MPa or less (at 20°C).

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	4 ～ 12	Up to 4 ～ Up to 15	2.5 ～ 8	Urethane	Up to 3 ～ Up to 8	Air	Standard

Ordinarie pris (exklusive MOMS):

26.15 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

Fluoropolymer Tubing (FEP) TH / TIH Series

KAMPANJFÖRSÄLJNING

SMC

Fluoropolymer Tubing (FEP) TH / TIH Series

A fluoropolymer tubing with superior durability in chemical environments.[Features]· It is compliant to the Food Sanitation Act of Japan・ Operating temperature 200°C (Depends on conditions)・ Maximum operating pressure of 2.3 MPa or less (At 20°C) (Depends on size)・ It is compliant to FDA §177-1550 dissolution test

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	3.18 ～ 12	Up to 4 ～ Up to 20	2 ～ 10	Fluororesin	Up to 2 ～ Up to 20	Water / Air	Standard / Heat Resistance / Chemical Resistance

Ordinarie pris (exklusive MOMS):

41.63 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING

SMC

Antistatic Tubing TA Series

Tubing to which measures against static electricity have been applied. [Features]· Maximum operating pressure 1.2 MPa or less (at 20°C).· For pneumatic piping and applications which require measures against static electricity.· Flame-retardant tubing (equivalent to UL-94 standard V-0).· Fluid: air.· Color: black. [Applications]· For preventing static electricity.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	4 ～ 12	Up to 4 ～ Up to 15	2 ～ 8	Urethane / Polyolefin Resin	Up to 2 ～ Up to 8	Air	Standard

Ordinarie pris (exklusive MOMS):

31.10 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

- Volume Discount
MISUMI
Tubes / Spiral Shape Type
[Features] It can be used for bundling and protecting hoses and cables, and allows flexible conduit wires and branching.
Mer information
CAD:
2D
/3D
Type Cutting Service Usage Outer Diameter D(Ø) O.D. [Distinction] Inner Diameter d(Ø) Material I.D. [Distinction] Applicable Fluid Operating Environment
Straight Not Provided - - - Others - - -
Ordinarie pris (exklusive MOMS):
90.04 €～
Ordinarie avsändningsdatum:
5 arbetsdagar
Konfigurera

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	-	-	-	Others	-	-	-

Volume Discount

MISUMI

Tubes / Soft Nylon Tubes

[Features] A soft nylon tube with high flexibility.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 12	-	2.5 ～ 9	Nylon	-	Water / Air	Pressure Resistance / Abrasion Resistance / Low Temp. Resistance / Weather Resistance

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

MISUMI

Tubes / Nylon

[Features] A nylon tube with high oil resistance.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	3.2 ～ 12	-	2 ～ 9	Nylon	-	Water / Air / General Hydraulic Oil	Abrasion Resistance / Oil Resistance

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

MISUMI

Tubes / Sputter Resisting

[Features] This splash-proof hose is flexible and easy to lay.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	6 ～ 12	-	4 ～ 8	Urethane	-	Water / Air	Sputter Resistant

Ordinarie avsändningsdatum:

6 arbetsdagar

Konfigurera

Volume Discount

MISUMI

Tubes / Soft Fluororesin Type

[Features] A flexible fluoropolymer hose with high flexibility.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 12	-	2 ～ 8	Fluororesin	-	Water / Air / Chemical	-

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Volume Discount

MISUMI

Tubes / Fluororesin Type

[Features] A fluoropolymer tube with high heat and cold resistance.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	3.2 ～ 12	-	1.6 ～ 10	Fluororesin	-	Water / Air	Heat Resistance / Low Temp. Resistance / Weather Resistance

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Tubes / Fluoro Rubber / Clear Transparent Type

Volume Discount

MISUMI

Tubes / Fluoro Rubber / Clear Transparent Type

[Features] Hose with excellent resistance to heat, oil, weather, chemicals, etc.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	4 ～ 10	-	2 ～ 8	Fluororubber	-	Water / Air / Chemical / General Hydraulic Oil	Heat Resistance / Oil Resistance / Weather Resistance

Ordinarie avsändningsdatum:

7 arbetsdagar

Konfigurera

Order quantities extended (D-JIT)

MISUMI

Tubes / Flexible Fluororesin Type

[Features] A flexible fluoropolymer tube with high heat and cold resistance.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	6 ～ 12	-	4 ～ 10	Fluororesin	-	Water / Air	Heat Resistance / Low Temp. Resistance / Weather Resistance

Ordinarie pris (exklusive MOMS):

70.14 €～

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Tubes / Polyurethane / for Compressed Air

Volume Discount

MISUMI

Tubes / Polyurethane / for Compressed Air

A compact air connection tube. [Media used]Water/air

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	1.8	-	1.2	Urethane	-	Water / Air	Water Resistance / Abrasion Resistance

Ordinarie pris (exklusive MOMS):

26.33 €～

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Volume Discount

MISUMI

Air Hose / Sliding

[Features] Its softness and suppleness allow it to work safely and smoothly.

Mer information

CAD:: 2D; /3D

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	10 ～ 12.5	-	6.3 ～ 8.3	Urethane	-	Air	-

Ordinarie pris (exklusive MOMS):

46.60 €～

Ordinarie avsändningsdatum:

5 arbetsdagar

Konfigurera

Straight Polyurethane Tubes for General Piping

KAMPANJFÖRSÄLJNING
Volume Discount

NIHON PISCO

Straight Polyurethane Tubes for General Piping

Urethane tubes with excellent flexibility.[Features]· Excellent flexibility.· Ideal for general pneumatic piping requiring a small bending radius.· Abundant tube colors.· Cut marks are indicated at intervals of 500 mm, which are useful when cutting the tube.· Long tubes can also be made to order.[Applications]· Assembly equipment, equipment for semiconductor processes, equipment for physics and chemistry based applications.· Equipment for crop dusting piping by drone, filling machines related devices.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Provided	1.8 ～ 16	Up to 2 ～ Up to 20	1 ～ 11	Urethane	1 or Less ～ Up to 15	Water / Air	Standard / Water Resistance

Ordinarie pris (exklusive MOMS):

11.71 €～

Ordinarie pris (exklusive MOMS):

Specialpris

Ordinarie avsändningsdatum:

Lagervara: 1 arbetsdag

Vissa artiklar kan skickas samma dag

Konfigurera

KAMPANJFÖRSÄLJNING
Volume Discount

NIHON PISCO

General Piping Straight Soft Nylon Tube

A tube that can be used in hot water and thermal oil.

Mer information

Type	Cutting Service Usage	Outer Diameter D(Ø)	O.D. [Distinction]	Inner Diameter d(Ø)	Material	I.D. [Distinction]	Applicable Fluid	Operating Environment
Straight	Not Provided	4 ～ 16	Up to 4 ～ Up to 20	2.5 ～ 13	Nylon	Up to 3 ～ Up to 15	Water / Air / Thermal Media Oil	Standard / Mold Cooling / Water Resistance / Pressure Resistance / Abrasion Resistance