Resin Hoses（Color：Gray）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Toyota Signal
TOYOX
This is a hose with a higher-than-standard pressure tolerance. Given its high pressure tolerance specifications, it can be used for dedicated fittings.- Volume Discount
Configure nowStarting from∗ ： 8.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Braided Hose
CHIYODA TSUSHO
Excellent attaching properties for fittings due to nylon or urethane single layer tubing.
[Features]
· Extremely soft compared to urethane or nylon single layer tubing and easily connected to hose fittings.
· Suitable for air piping inside factoriesConfigure nowStarting from∗ ： 49.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Resin Hoses for General Purposes / High Pressure Type
MISUMI
[Features] Resin tube with high pressure resistance. -Cutting service is available.- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Light Hose
KANAFLEX CORPORATION
[Features] A lightweight hose that can be used for a variety of purposes.Configure nowStarting from∗ ： 218.37 € Min. Shipping Days ： 64 Days *Unit price with basic configuration
-
TAC SD-C
TOTAKU INDUSTRIES
[Features]
· Inner and outer surfaces are smooth.
· Has better pressure resistance than the TAC SD-A.
· Because the soft portion is transparent, it is possible to check the contents that are being transported.Configure nowMin. Shipping Days ： 11 Days -
Ti-Power Hose, FC-Type (Mortar Hose)
TIGERS POLYMER
With little expansion under pressurization, this hose has superior pressure-resistant performance. It has excellent abrasion resistance. Use of an inner cylinder expansion fitting smooths the inner surface, to smooth out the fluid flow.Configure nowMin. Shipping Days ： 10 Days -
Air Duct Hose
PLAS-TECH
[Features]
· Lighter than a conventional hose.
· Superior bending properties and excellent chemical resistance.
· The operating temperature ranges from -20°C - 60°CConfigure nowStarting from∗ ： 431.03 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 10 Days -
Hybrid TOYODROP Hose
TOYOX
[Features]
・Prevents condensation, for safety and security.
・ Resistant to bending or crushing, for guaranteed flow rate.
・ Heat insulation material coating work not required. Piping work is easy.
・ Connects to dedicated couplings, preventing leakage and disconnections.Configure nowStarting from∗ ： 15.59 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 14.81 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Applicable Fluid / Usage |
| Cutting Service Usage |
| Nominal I.D. d |
| O.D. D(mm) |
| Properties |
| Hose Material |
| Mounting Metal Fittings |
| Color |
|
|
|
|
|
|
|
|
|
| |
| Brand | TOYOX | CHIYODA TSUSHO | MISUMI | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TIGERS POLYMER | PLAS-TECH | KURARAYPLASTICS | TOYOX | TRU COMPONENTS |
| Product Series | ||||||||||
| CAD |
| |||||||||
| Starting from∗ | 8.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 49.80 € *Unit price with basic configuration | - | 218.37 € *Unit price with basic configuration | - | - | 431.03 € *Unit price with basic configuration | - | 15.59 € *Unit price with basic configuration | 14.81 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 5 Days | 5 Days | 64 Days | 11 Days | 10 Days | 9 Days | 10 Days | 7 Days | 3 Days |
| Applicable Fluid / Usage | Water / Chemical / Powder / Air / Oil (Mineral Oil) | Air | Water / Air | Water | Water | Cement | Powder / Air | Steam | Water | - |
| Cutting Service Usage | Yes | No | Yes | No | Yes | Yes | No | No | Yes | - |
| Nominal I.D. d | 9 ～ 25 | 6.5 ～ 11 | 9 ～ 25 | 32 | 19 ～ 100 | 50 | 38.1 ～ 127 | 16 ～ 25 | 9 ～ 25 | - |
| O.D. D(mm) | 15 ～ 33 | 10 ～ 16 | 15 ～ 33 | 36.5 | 24.2 ～ 115.8 | 65 | 46.5 ～ 137.9 | 28 ～ 43 | 15 ～ 33 | - |
| Properties | Pressure Resistance / Oil Resistance / Chemical Resistance / Low Release / Transparency / Flexibility | Standard / Oil Resistance | Pressure Resistance | Standard / Flexibility | Pressure Resistance / Transparency / Vacuum | Abrasion Resistance / Pressure Resistance | Flexibility | Pressure Resistance / Heat Resistance / Flexibility / Other Properties | Flexibility / Condensation Prevention | - |
| Hose Material | Vinyl Chloride | Polyurethane | Vinyl Chloride | Vinyl Chloride | Others | Vinyl Chloride | Vinyl Chloride | - | Fluororesin | - |
| Mounting Metal Fittings | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - |
| Color | Gray | Gray | Gray | Gray | Gray | Gray | Gray | Gray | Gray | Gray |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Applicable Fluid / Usage
- Water
- Chemical
- Powder
- Air
- Special factory requirements
- Oil (Mineral Oil)
- Ink, Paint
- Solvent
- Cement
- Grains
- Steam
- Oxygen
- Acethylene
- Carbon Dioxide
- Argon
- Nitrogen
- Gas
- Agrichemical
-
Cutting Service Usage
- Yes
- No
-
Nominal I.D. d
-
O.D. D(mm)
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 10.5
- 10.6
- 11
- 11.7
- 11.7/11.7
- 12
- 12.3
- 12.5
- 13
- 13.5
- 14
- 14.3
- 14.5
- 14.5/16.0
- 15
- 16
- 16.5
- 17
- 18
- 19
- 19.5
- 20
- 20.1
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.7
- 25
- 25.6
- 26
- 27
- 27.5
- 28
- 28.2
- 28.5
- 29
- 29.9
- 30
- 30.4
- 30.8
- 30.9
- 31
- 31.2
- 31.5
- 31.6
- 31.8
- 32
- 32.6
- 32.9
- 33
- 33.4
- 33.5
- 33.7
- 33.8
- 34
- 34.2
- 34.4
- 34.5
- 34.9
- 35.5
- 35.6
- 36
- 36.5
- 36.7
- 37
- 37.4
- 37.6
- 38
- 38.2
- 39
- 39.2
- 39.3
- 39.8
- 40
- 40.2
- 40.5
- 40.8
- 41
- 41.5
- 41.6
- 41.8
- 42
- 42.5
- 43
- 43.2
- 43.5
- 43.8
- 43.9
- 44
- 44.4
- 44.6
- 45.5
- 45.8
- 46
- 46.2
- 46.4
- 46.5
- 46.6
- 47.0
- 47.2
- 47.5
- 47.6
- 47.8
- 48
- 48.4
- 48.5
- 48.7
- 48.8
- 49.5
- 50
- 50.1
- 50.5
- 50.7
- 51
- 52
- 52.3
- 53
- 55
- 56
- 57.0
- 57.5
- 58
- 58.2
- 58.5
- 58.6
- 59.5
- 59.7
- 59.8
- 60
- 60.2
- 60.5
- 60.9
- 61
- 61.4
- 61.6
- 62
- 62.6
- 62.8
- 63
- 63.4
- 63.5
- 64.5
- 65
- 65.2
- 66.0
- 66.8
- 68
- 69.3
- 69.5
- 69.7
- 71.0
- 71.5
- 72
- 72.1
- 72.2
- 72.4
- 72.6
- 73
- 73.6
- 73.9
- 74
- 74.1
- 74.6
- 74.8
- 75
- 75.1
- 76.0
- 76.5
- 76.8
- 77
- 78
- 78.5
- 78.9
- 80
- 80.5
- 81.5
- 84
- 84.8
- 85.1
- 86
- 86.3
- 86.6
- 87.0
- 87.5
- 87.6
- 88.0
- 88.8
- 89
- 89.1
- 89.6
- 89.8
- 90
- 90.2
- 90.8
- 91
- 91.4
- 92
- 93.3
- 95.5
- 99.1
- 99.5
- 99.7
- 100.5
- 101
- 102.0
- 102.8
- 104
- 104.2
- 104.3
- 105.2
- 106.0
- 107
- 108
- 111.6
- 112.0
- 112.3
- 112.6
- 113
- 115
- 115.2
- 115.8
- 117
- 117.2
- 117.6
- 118
- 118.4
- 118.6
- 119
- 119.5
- 120
- 120.5
- 128
- 129
- 131.8
- 137.9
- 139.5
- 140
- 140.6
- 141.6
- 143
- 143.6
- 144.8
- 146.8
- 148
- 151
- 152
- 152.2
- 152.5
- 159.5
- 167.5
- 168.0
- 169.4
- 169.8
- 171.0
- 172.0
- 173
- 173.6
- 174.7
- 180
- 180.5
- 183.5
- 184.5
- 197.8
- 221.5
- 223.4
- 223.8
- 226.4
- 226.5
- 229.7
- 230
- 233.5
- 235
- 237
- 238.0
- 245
- 274
- 286.0
- 295.0
- 328.5
- 347.0
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Weather Resistance
- Pressure Resistance
- Heat Resistance
- Low Temp. Resistance
- Oil Resistance
- Chemical Resistance
- Low Release
- Non-adhesive
- Transparency
- Flexibility
- Low Odor
- Condensation Prevention
- Shape Retention
- High Strength
- Vacuum
- Bending Property
- Other Properties
-
Hose Material
- Polyurethane
- Vinyl Chloride
- Silicon Rubber
- Fluororesin
- Olefinic Resin
- Polyolefinic Resin + Styrene Resin
- Others
- Elastomer
- Ethylene Propylene Rubber
- Nylon
-
Mounting Metal Fittings
-
Color
- White
- Milky White
- Transparent (including non-white colors)
- Red
- Blue
- Green
- Rose
- Black
- Gray
- Ivory
- Orange
- Yellowish Opaque White
- Pink
- Brown
- 2-Color
- Yellow
Brand
-
- TOYOX (2)
- TRU COMPONENTS (1)
- CHIYODA TSUSHO (1)
- KANAFLEX CORPORATION (1)
- KURARAYPLASTICS (1)
- PLAS-TECH (1)
- TIGERS POLYMER (1)
- TOTAKU INDUSTRIES (1)
- TOGAWA INDUSTRY (0)
- HAKKO (0)
- ESCO (0)
- PREVOST (0)
- NORELEM (0)
- HELLERMANN TYTON (0)
- DSG CANUSA (0)
- TRUSCO NAKAYAMA (0)
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Resin Hoses
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.