Washers / Collars / Sleeves (Metal)（Page 2）

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

• • Promotional pricing

  

  Spacer sleeves / brass / nickel-plated / CB-P

  HIROSUGI-KEIKI

  [Nominal size (M) of compatible screws] 2/2.6/3/4/5/6
  [Materials] Brass (C2700T-H) with less than 10 ppm cadmium content
  [Treatment] Degreasing, nickel plating (Ni)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spacer sleeves / welded / steel / chrome-plated / CF-ZE

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 2/2.6/3/4/5/6
  [Material] Steel Plate (SPCC)
  [Processing] Trivalent Chromium Chromate Processing

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Forehead washers / conical countersunk hole, chamfered / steel / burnished / GN 184

  GANTER

  Countersunk washers GN 184 are retained to the face of the shaft end with a countersunk head screw DIN ISO 2009 or DIN 7991 forming a clean-look end cap.
  A typical application is the retention of handwheels with hub keyed to the shaft.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Holding discs for magnets / conical counterbore / steel / zinc plated, passivated / GN 70

  GANTER

  Holding discs GN 70 are used as companion parts for retaining magnets, e.g. if a magnet is to be used in connection with non-magnetic materials.
  They can be fixed with countersunk screws (e.g. DIN 7991), but also with any commercial wood or sheet metal countersunk screws.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.70 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Conical seats Form D DIN 6319, edition 10/01 (K0729)

  KIPP

  · To compensate for unevenness
  
  · Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  End washers, Stainless Steel (K1823)

  KIPP

  · Accessories for round pull handles
  
  · Stainless steel A4 quality

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Washer, steel or aluminium (07320)

  NORELEM

  · Increased strength
  
  · For increased strength requirements

  Select to compare

  Configure now
  Starting from∗ ：	0.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spacer sleeves / brass / nickel-plated / CB-E

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 1.7/2/2.6/3/4/5/6
  [Material] Free-Cutting Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Nickel Plating (Ni)

  Select to compare

  Configure now
  Starting from∗ ：	0.22 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spacer sleeves / brass / degreased / CB-PC

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 2/2.6/3/4/5/6
  [Material] Brass (C2700T-H), Cadmium Content Less than 10 ppm
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.13 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Spacer sleeves / stainless steel / degreased / CU-H

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 2/2.6/3/4/5
  [Material] Stainless Steel (SUS304)
  [Processing] Degreasing
  * High-grade stainless steel is used for the stainless 304 spacer.
  The letter 'H' is marked on the spacer.

  Select to compare

  Configure now
  Starting from∗ ：	2.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spacer washers / ground / case hardened

  HALDER

  · Steel, carburized and polished

  Select to compare

  Configure now
  Starting from∗ ：	21.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Conical seats Form D DIN 6319, edition 10/01 (07420)

  NORELEM

  · To compensate for unevenness
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.46 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Sealing washers DIN 7603 copper or Aluminium (K2078)

  KIPP

  · High temperature resistance

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Washers / steel / black oxided, nickel-plated【50-100 Pieces Per Package】

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.64 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spacer Washer (BJ623)

  IMAO CORPORATION

  Polishing finish on upper and underside. [Materials]EN 1.1191 Equiv. with surface treatment options: Black oxide coating

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.82 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Collar (Square Type) B-990

  TAKIGEN

  Provided with pin. Wide variations are available.
  
  [Features]
  · Provided with pin (B-1099, B-99). Wide set variations are available.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spacer sleeves / aluminium / pickled / CL-E

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 2/2.6/3/4/5/6
  [Material] For M2: Lead-Free Free-Cutting Aluminum (CB156) Lead Content 10 ppm or Less / For M2.6 to M6: Lead-Free Free-Cutting Aluminum (KS26) Lead Content 300 ppm or Less
  [Processing] Pickling

  Select to compare

  Configure now
  Starting from∗ ：	0.22 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spacer sleeves / square / brass / nickel-plated / CQB-E

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 3/4
  [Material] Free-Cutting Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Nickel Plating (Ni)

  Select to compare

  Configure now
  Starting from∗ ：	0.40 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  C-washers captive DIN 6371 (K0703)

  KIPP

  · Can be dismantled without completely removing the screws
  
  · Captive

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.79 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Conical seats Form G, D4>D3, DIN 6319, edition 10/01 (07420)

  NORELEM

  · To compensate for unevenness
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spacing washers (K0860)

  KIPP

  · Ground height dimension
  
  · Increased strength

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spacer sleeve hygienic design, with seal (07219)

  NORELEM

  · Stainless steel 1.4404
  
  · Size M6–M12
  
  · exchangable seal washer
  
  · Foodstuff conform material
  
  · Cleaning optimised geometry

  Select to compare

  Configure now
  Starting from∗ ：	8.85 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spacer for multi-clamping system (41505)

  NORELEM

  · For extending the lateral adjustment range with end stops
  
  · Quick and secure fastening by screw connection
  
  · Suitable for multi-clamping system

  Select to compare

  Configure now
  Starting from∗ ：	3.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Collar B-96

  TAKIGEN

  Available in a range of sizes: outer diameter ø 10 to 18 mm, and hole diameter ø 5 to 10 mm.
  Check the e-catalog for sizes not listed in the catalog.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Collar B-1096

  TAKIGEN

  Available in a range of sizes: outer diameter ø 10 to 18 mm, and hole diameter ø 5 to 10 mm.
  Check the e-catalog for sizes not shown in the catalog.
  
  [Features]
  · Provided with pin (B-1099, B-99) wide variations are available.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Collar (Square Type) B-1990

  TAKIGEN

  Provided with pin. Wide variations are available.
  
  [Features]
  · Provided with pin (B-1099, B-99). Wide set variations are available.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.45 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spacer washers / steel, stainless steel / black oxided, nickel-plated / WCx, WMx, WSx

  IWATA MFG

  It can be used for tightening screws, spacers, etc. Sold as a single piece

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Centring pin / round, threaded hole / steel

  HALDER

  To be used for locating fixtures and clamping elements onto mounting pallets or pallets with cylindrical location holes.
  They can be inserted in holes as well as in slots.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	62.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Centring pin / counterbored / steel / burnished / case-hardened

  HALDER

  To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.48 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spacer sleeves / brass / nickel-plated / CE-N

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 2/2.6/3/4/5/6
  [Material] Lead-Free Free-Cutting Brass (Bismuth Base)
  [Processing] Nickel Plating (Ni)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spacer sleeves / titanium / CTI

  HIROSUGI-KEIKI

  [Supported Screw Nominal (M)] 3
  [Material] Pure Titanium
  [Processing] Degreasing
  Lightweight titanium has specific gravity about 60% of that of stainless steel, as well as excellent chemical resistance and especially seawater resistance.
  Since titanium is non-magnetic, it can be used for electronic equipment, semiconductor manufacturing equipment, medical equipment and the like that require non-magnetic properties.

  Select to compare

  Configure now
  Starting from∗ ：	2.46 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Holding discs for magnets / steel / galvanised, passivated / GN 70.1

  GANTER

  Adhesive discs GN 70.1 are used as counter piece for retaining magnets if a magnet is to be used on a non-magnetic surface, for instance.
  
  After pulling off the protective film from the adhesive pad at the back, they can be attached to any suitable and clean surface.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Forehead C-washers / steel / burnished / case-hardened / similar to DIN 6372 / GN 183

  GANTER

  C-Washers GN 183 maybe installed without the removal of the nut from the stud.
  In terms of dimensions they are almost identical to DIN 6372 C-Washers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Forehead washers / conical counterbore, cover cap / steel / zinc-plated, passivated / GN 338

  GANTER

  Discs with cover caps GN 338 are suitable for use as gliding or non gliding feet on machinery.
  Removal of the cover can be done by inserting a screwdriver in the gap on the edge.
  
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping force intensifiers (K0584)

  KIPP

  · The integrated bearing unit can achieve twice the clamping force with the same lever length
  
  · The component surface is protected by the stationary lower ring
  
  · Higher preload force results in a lower tendency towards material relaxation in the thread

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  C-washers DIN 6372 enhanced (K0730)

  KIPP

  · Can be dismantled without completely removing the screws

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  C-washers DIN 6372 enhanced (07380)

  NORELEM

  · Can be dismantled without completely removing the screws

  Select to compare

  Configure now
  Starting from∗ ：	6.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  C-washers captive DIN 6371 (07520)

  NORELEM

  · Can be dismantled without completely removing the screws
  
  · Captive

  Select to compare

  Configure now
  Starting from∗ ：	21.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping force intensifiers (07415)

  NORELEM

  · The integrated bearing unit can achieve twice the clamping force with the same lever length
  
  · The component surface is protected by the stationary lower ring
  
  · Higher preload force results in a lower tendency towards material relaxation in the thread

  Select to compare

  Configure now
  Starting from∗ ：	23.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Reducer sleeves (K1927)

  KIPP

  · To change the diameter between the hollow shaft sensor and adjustment spindle

  Select to compare

  Configure now
  Starting from∗ ：	30.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Washers for clamps DIN 6340 (K0867)

  KIPP

  · Increased strength
  
  · For increased strength requirements

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Captive C-washers, with shoulder screw (K0872)

  KIPP

  · Quick and easy actuation
  
  · Tempered

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spacer sleeves, Stainless Steel with seal washer in Hygienic DESIGN (K1822)

  KIPP

  · Stainless steel 1.4404
  
  · Size M6–M12
  
  · exchangable seal washer
  
  · Foodstuff conform material
  
  · Cleaning optimised geometry

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Captive c-washer with shoulder screw (07520)

  NORELEM

  · Quick and easy actuation
  
  · Tempered

  Select to compare

  Configure now
  Starting from∗ ：	23.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spacer disc ground, carbon steel (07523)

  NORELEM

  · Ground height dimension
  
  · Increased strength

  Select to compare

  Configure now
  Starting from∗ ：	12.70 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...