Torque hinges / cylinder countersinks / extruded aluminium / MISUMI (Part Numbers - CAD Download)

Back to the Category Hinges

Further specifications can be found under the tab More Information.

Selection Details of Hinges

- Material: aluminum, plastic, stainless steel, steel, zinc alloy

- Coatings: polished, light-polished, stove-enamelled, brushed, anodized, sandblasted, mirror-polished, nickel-plated, chrome-plated

- Designs: flat hinge, wing hinge, spring hinge, damper hinge, torque hinge, hinge with stopper, hinge with latch function, piano band (rod hinge), hinge inside

- Bore hole: round hole, counterbore, conical counterbore, oblong hole

-Width: 8 mm to 120 mm

- Length: 20 mm to 1000 mm

Overview of the various designs as PDF

Description/Basics

Hinge

Hinges are among the fittings and are intended for movable storage. Similar to a joint, a hinge enables a bending, pivoting or folding movement. In principle, hinges are differentiated into a detachable hinge and an inseparable hinge. The separable hinge is also called a plug-in hinge. The advantage of a hinge is that the flap or door can be unhooked without great effort. Hinges are often used for maintenance doors, cabinet doors and windows. The hinge pin or hinge bolt serves as a connecting piece and axis of rotation at the same time. In most cases, the hinges are fastened using a screw connection, but hinges can also be welded to the hinge strap (flap/wing) in a permanent manner. When welding hinges, thinner sheet metals can deform due to the heat generation. Therefore, the screw version of the hinges is recommended for thinner wall thicknesses. You can buy many different hinges in the MISUMI online shop.

Spring hinge

Spring hinges are usually rolled sheet metal hinges that are preloaded with a torsion spring. The spring hinge can support an opening or closing of a flap, depending on the application. The clamping force generated increases as the angle of the spring hinge increases. Spring hinges can also support a reset function. Thus, spring hinges can also help to reduce the number of components in some applications.

Materials

The MISUMI hinges are available in aluminum, plastic, stainless steel, steel and a zinc alloy. You can order these in the MISUMI Hinge Shop as flat sheet metal hinge and in stainless steel plate, up to extruded heavy-load hinges.

Coatings

The various treatments and surface treatments such as: polished, lightly polished, brushed, sand blasted, mirror polished, stove enamelled, anodized, nickel-plated, chrome-plated are available to you at MISUMI. With these coatings, the hinges are optimally protected against corrosion and always offer a suitable appearance with the versatile surface treatments.

Installation Information

To achieve smooth operation, it is essential to align the hinge. Therefore, an exact drilling pattern is necessary for the installation. For fine positioning, MISUMI offers elongated-hole hinges, which enable easy adjustment of the elements. After the correct position has been set, the screws can be tightened with a torque wrench. For longer hinges, the screws should be tightened from the inside to the outside so that the base of the hinge fits evenly.

Maintenance

Maintenance plays an important role in the ease of movement and long service life of a hinge. Prior to lubrication, a hinge should be cleaned of old lubricants and contaminants. After lubricating, the hinge should be moved several times so that the lubricant is evenly distributed in the eyelet and hinge bolts. Which lubricant is suitable depends on the respective application and environmental influences. For commercial applications, graphite oil is often used.

Hinge bolts

Hinge bases/hinge plates/hinge bolts

Screws/bolts

Washers / lock washer

Plain bearing bushings

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Back to the Category Hinges

Overview of the various designs as PDF

Part Number

* Allowable Load

** Rated Torque

Mass (g)

S

P1

P2

J

Clear Anodize

Black Anodize

Unit Price

Volume Discount Rate

Unit Price

Volume Discount Rate

Type

No.

kg

N

N • m

kgf • cm

1 ~ 8 pc (s).

9~50

1 ~ 8 pc ( s).

9~50

HHPTF HHPTFB (Black Anodize)

6

10

98

0 ~ 4.9

0 ~ 50

54

32

16

16

13.5

8-6

37

16

21

13.5

8

42

21

21

8.5

* The allowable load is the value when 2 pieces are used. ** Rated torque value is for a single hinge.