Brass, 0.98 MPa, Threaded Type Needle Stop Valve (Part Numbers)

[Features]
• The body has a strong, cast structure, and compact thanks to its bonnet-less shape.
· The valve has a needle-like shape, allowing you to adjust the flow rate.
• Designed with an emphasis on operability, it adopts a structure with a low handle torque and good sealing properties.
• The handle has good operability, and is red colored as standard.
• By changing the grease and O-ring, it is possible to produce oxygen-free lubricant.
• If the operating temperature range is to exceed 80°C, you can change the O-ring and handle, and use it up to 125°C.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Save
Similar products
Product data
CAD data not available

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
DH-11A-R
DH-11C-R

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Supply Side, Plumbing Thread Nominal	Control Side, Plumbing Thread Nominal	Length L (mm)	Height H (mm)
	23.69 €	1		6 Days	1/8B	1/8B	32	48
	25.02 €	1		8 Days	3/8B	3/8B	40	49.0

Basic information

Main Body Shape	Globe type	Body Material	EN CW617N Equiv.	Applicable Fluid	Water / Air / Oil / Gas / Chemical
Supply Side, Connection Type	Rc	Control Side, Connection Type	Rc	Handle Shape	Round-shaped handle
Body Lining	NA	Operating Temperature Range(°C)	-20::80	Operating Pressure Range(MPa)	0::0.98
Handle Dia. D(mm)	35	Operation Method	Manual Operation Type	Orifice Dia(φ mm)	5.0