Inner Urethane Cap GAP-4R-BK (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
An inner urethane cap (made of urethane) for mounting to pipe ends.
[Features]
· The tip shape of the cap is hemispherical.
· Depending on the type of pipe, some objects might be difficult to install. In such a case, try knocking it in with a plastic hammer, etc.
· Thicker than other type of cap, allowing it to take heavier loads without breaking.
· Compatible with 2807 Series ECO, SUH and resin‑coated pipes.
· Use a hammer to install resin‑coated pipes.
[Applications]
· For caps at points at which large loads or impact are applied to the pipe tip.
[Features]
· The tip shape of the cap is hemispherical.
· Depending on the type of pipe, some objects might be difficult to install. In such a case, try knocking it in with a plastic hammer, etc.
· Thicker than other type of cap, allowing it to take heavier loads without breaking.
· Compatible with 2807 Series ECO, SUH and resin‑coated pipes.
· Use a hammer to install resin‑coated pipes.
[Applications]
· For caps at points at which large loads or impact are applied to the pipe tip.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GAP-4R-BK
- Product data
- CAD data not available
Basic information
| Type | Accessory | Accessory Type | Cap End |
|---|
This page is Inner Urethane Cap GAP-4R-BK, part number GAP-4R-BK.
You can find the detail information about specifications and dimensions on part number GAP-4R-BK.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.