EPIC® POWERLOCK Screw contacts (Part Numbers)

Benefits
· M12 threaded post contact for tube cable lug contact Contact drain for use with type A1
· contact source for use with design type A6 (depending on application either screw or crimp)
· Screw contact for easy-to-service connection without special tools Screw contact drain for use with type F6 S
· screw contact source for use with type D6 S Screw contacts are intended for conductor cross-sections up to 120 mm² For smaller conductor cross-sections up to 50 mm², a diameter reduction must be used
· Crimp contact ensures maximum contact reliability between the contact and the cable and establishes a vibration-resistant connection Different contact sizes available for conductor cross-sections from 35 to 240 mm² Crimp contact, drain for use with type F6 C
· crimp contact source for use with type D6 C
· All contacts are supplied with contact retention pin for fastening the contact to the panel-mount base

Application
· For use with unscreened single cores
· Withstands moderate mechanical stress
· Can be used for mobile and stationary power supply or emergency power supply via generators or battery storage systems
· Suitable for three-phase and direct current applications The maximum current strength in combination with screw contacts is 400 A
· the maximum current strength in combination with crimp contacts is 660 A
· Suitable for electric motors and cooling units