Holding Tools for I.D. Tuning（Application：Inner diameter profiling Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Configure nowStarting from∗ ： 806.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn SL, 570 Type T-Max P, Head for Back Boring
SANDVIK
[Features]Cutting head for inner diameter turning with a replaceable head. Excellent insert clamping rigidity due to the double clamping. Quick head changes are possible, reducing downtime. Inner diameter turning operations.Configure nowStarting from∗ ： 479.94 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR / L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner diameter cutting.
Being a double clamp gives it excellent insert-clamping rigidity.
The heads can be quickly changed out, helping reduce down time.
Inner-diameter turning (bore cutting) operations.Configure nowStarting from∗ ： 462.06 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit T-Max P Lever Clamp S...-PDUNR / L
SANDVIK
[Features]
An easy-handling inner-diameter boring tool bit with excellent repeatability.
The use of internal coolant improves the handling of cutting chips and gives the inserts a longer service life.
Supports inner-diameter turning (bore cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Configure nowStarting from∗ ： 413.19 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Turning CXS-..T090
SANDVIK
[Features]
CoroTurn XS Insert Bar
Solid-carbide coating
Boring bit for small-diameter machining
For turningConfigure nowStarting from∗ ： 53.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 56.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 58.03 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Profiling CXS-..TE98 Profiling
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For profilingConfigure nowStarting from∗ ： 59.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Grooving CXS-..G
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For grooving
Groove width: 1.5 mmConfigure nowStarting from∗ ： 61.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Profiling CXS-..R
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For grooving
Full R
R: 2.0 mmConfigure nowStarting from∗ ： 69.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Configure nowStarting from∗ ： 442.88 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
T-Max S Boring Tool Bit For Turning S..CTFPR / L
SANDVIK
A boring tool bit for turning that achieves high productivity, high quality, and high efficiencyConfigure nowStarting from∗ ： 199.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 619.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 523.29 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 544.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 542.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn HP SL Cutting Head TR-SL-V13LBR / L-HP
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of itemsConfigure nowStarting from∗ ： 542.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn SL 570 Type Cutting Head TR-SL-D13UCR / L
SANDVIK
[Features]
SL coupling
Extremely high clamp rigidity
The T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precision
High-precision machining
For profile turning.Configure nowStarting from∗ ： 479.94 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 366.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 366.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 830.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 830.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 830.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 474.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 479.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 538.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 645.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 481.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 432.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 189.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 777.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 304.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 775.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 544.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 61.00 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 478.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Kyocera, Inner Diameter Boring Holder, E-SDUC-A Type
KYOCERA
[Features] E-SDUC-A type: This is a dynamic rod that achieves excellent cutting performance. [Features] For boring bars and profiling.Configure nowStarting from∗ ： 393.97 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Applicable Tip Shape |
| Minimum Machining Diameter |
| Application |
| Cutting Direction |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank diameter |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA |
| Product Series | Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR / L-R | CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR / L | CoroTurn XS Insert Bar For Turning With Chip Breaker CXS-..T098 | CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L | CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR / L-X | CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDXCR / L | Coromant Capto Cutting Head For Inner-Diameter Turning C3-SDUCR / L-X | Coromant Capto, Cutting Head For Inner Diameter Turning, DDUNR / L | Coromant Capto Cutting Head For Inner-Diameter Turning MVUNR / L | Coromant Capto Cutting Head For Inner-Diameter Turning PTFNR / L | Boring Tool Bit, CoroTurn 111, Screw Clamp, Carbide Bit, E...-STFPR / L | Boring Tool Bit, CoroTurn 111, Screw Clamp, E.-SDUPR / L-ERX | CoroTurn 107 Cutting Head For Turning With High-Pressure Coolant Technology SL-SDUCR / L-HP | |||||||||||||||||||||||||||
| Starting from∗ | 806.06 € *Unit price with basic configuration | 479.94 € *Unit price with basic configuration | 462.06 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 413.19 € *Unit price with basic configuration | 53.87 € *Unit price with basic configuration | 56.57 € *Unit price with basic configuration | 58.03 € *Unit price with basic configuration | 59.21 € *Unit price with basic configuration | 61.69 € *Unit price with basic configuration | 69.36 € *Unit price with basic configuration | 442.88 € *Unit price with basic configuration | 199.20 € *Unit price with basic configuration | 619.47 € *Unit price with basic configuration | 523.29 € *Unit price with basic configuration | 544.15 € *Unit price with basic configuration | 542.73 € *Unit price with basic configuration | 542.73 € *Unit price with basic configuration | 479.94 € *Unit price with basic configuration | 366.84 € *Unit price with basic configuration | 366.84 € *Unit price with basic configuration | 830.40 € *Unit price with basic configuration | 830.40 € *Unit price with basic configuration | 830.40 € *Unit price with basic configuration | 474.67 € *Unit price with basic configuration | 479.37 € *Unit price with basic configuration | 538.36 € *Unit price with basic configuration | 645.99 € *Unit price with basic configuration | 481.57 € *Unit price with basic configuration | 432.90 € *Unit price with basic configuration | 189.52 € *Unit price with basic configuration | 777.09 € *Unit price with basic configuration | 304.25 € *Unit price with basic configuration | 775.06 € *Unit price with basic configuration | 544.15 € *Unit price with basic configuration | 61.00 € *Unit price with basic configuration | 478.09 € *Unit price with basic configuration | 393.97 € *Unit price with basic configuration |
| Min. Shipping Days | 8 Days | 14 Days | 14 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 14 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 12 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days |
| Applicable Tip Shape | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | - | - | - | - | - | - | V (35° Diamond-Shaped) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | - | V (35° Diamond-Shaped) | T (Triangle) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | - | Other | - |
| Minimum Machining Diameter | 13 ～ 16 | 50 | 40 | 20 ～ 55 | 20 ～ 50 | 20 ～ 60 | 32 | 5.2 | 5.2 ～ 7.2 | 5.2 ～ 7.2 | 4.2 ～ 6.2 | 4.2 ～ 7.2 | 4.2 ～ 7.2 | 33 | 20 ～ 32 | 32 ～ 63 | 38 ～ 56 | 40 ～ 50 | 45 ～ 50 | 40 ～ 50 | 50 | 22 ～ 50 | 22 ～ 50 | - | - | - | - | 22 ～ 32 | - | 40 ～ 63 | 32 ～ 63 | 40 ～ 50 | 22 ～ 27 | 22 | 8.5 ～ 20 | 22 | 40 ～ 50 | 4.2 ～ 6.2 | 44 ～ 48 | - |
| Application | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling |
| Cutting Direction | Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | - |
| Clamp Shape | Screw-on | Cable clamp | Cable clamp | - | - | - | Lever lock | - | - | - | - | - | - | Screw-on | Clamp-on | Lever lock | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Screw-on | Screw-on | Screw-on | - | Clamp-on | Lever lock | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | - | Clamp-on | Screw-on |
| Overall Length L1 | 150 ～ 180 | - | - | 25 ～ 63 | 24.2 ～ 54.4 | 25 ～ 63 | 300 | 32.25 ～ 42.25 | 37.25 ～ 62.25 | 32.25 ～ 62.25 | 37.26 ～ 52.25 | 27.3 ～ 57.8 | 32.3 ～ 52.7 | 20 | 200 ～ 300 | 300 ～ 350 | 32 ～ 36 | 38 | 22 ～ 27 | 38 ～ 40 | - | - | - | - | - | - | 15 | - | 120 ～ 170 | - | - | 300 | 200 ～ 250 | 200 | 100 ～ 200 | 200 | 32 | 27.3 ～ 52.3 | 350 ～ 400 | - |
| Clearance angle | 11° | 0° | 0° | - | - | - | 0° | - | - | - | - | - | - | - | 11° | - | - | - | - | - | 7° | - | - | 0° | 0° | 7° | 7° | 7° | - | 0° | 0° | 0° | 5° | 7° | 11° | 11° | - | - | 0° | 20° |
| Shank diameter | 10 ～ 12 | 40 | 32 | - | - | - | 25 | 5 | 5 ～ 7 | 5 ～ 7 | 4 ～ 6 | 4 ～ 7 | 4 ～ 7 | 25 | 16 ～ 25 | - | 25 ～ 40 | 32 ～ 40 | 32 ～ 40 | 32 ～ 40 | 40 | 16 ～ 40 | 16 ～ 40 | 80 | 80 | 80 | 32 | - | - | - | - | 32 ～ 40 | 16 ～ 20 | 16 | 6 ～ 16 | 16 | - | 4 ～ 6 | 32 ～ 40 | - |
| Protrusion length (L/D) | 100 ～ 120 | 20 | 20 | - | - | - | 100 | - | - | - | - | - | - | 20 | 32.5～64 ～ 49～100 | 36 ～ 40 | - | - | - | - | 32 | - | - | - | - | - | - | - | - | - | - | 128 ～ 160 | 64 ～ 80 | 64 | 36 ～ 96 | 96 | - | - | 128 ～ 160 | - |
| Lubrication Hole Y/N | N/A | Available | Available | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | - |
Loading...
Filter by:
-
Applicable Tip Shape
-
Minimum Machining Diameter
- 0.3
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 1.95
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 6.604
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.2042
- 8.5
- 8.6868
- 9
- 10
- 10.0 mm
- 10.2108
- 10.4902
- 11
- 12
- 12.0 mm
- 12.192
- 12.7
- 13
- 14
- 14.0 mm
- 15
- 15.1892
- 16
- 16.3068
- 17
- 17.2974
- 18
- 18.0 mm
- 18.4912
- 18.9992
- 19
- 19.6088
- 19.9898
- 20
- 20/30
- 20.1
- 20.62
- 21
- 21.59
- 22
- 23
- 23.5966
- 24.892
- 24.9
- 24.99
- 24.9936
- 24.994
- 25
- ø25
- 25/37
- 25.4
- 25.7048
- 26
- 26.01
- 26.6954
- 27
- 28
- 29
- 30
- 30.505
- 30.5054
- 31
- 31.496
- 31.5
- 31.801
- 32
- ø32
- 32.004
- 32.512
- 32.9946
- 32.995
- 33
- 33 mm
- 34
- 35
- 35.45
- 36.45
- 37
- 37.287
- 37.2872
- 37.313
- 37.45
- 38
- 38.1
- 38.45
- 38.913
- 39.45
- 40
- 40/55
- 40.005
- 40.01
- 40.1
- 40.1066
- 40.132
- 40.45
- 41
- 41.45
- 41.5
- 42.45
- 43
- 43.307
- 43.45
- 44
- ø44
- 44.45
- 44.704
- 45
- 45.0088
- 45.45
- 46
- 46.45
- 46.99
- 47
- 47.45
- 48
- 48.45
- 49.3014
- 49.45
- 50
- 50 mm
- 50/75
- 50.01
- 50.0126
- 50.038
- 50.45
- 50.8
- 51
- 51.45
- 52
- 52.45
- 53
- 53.45
- 54
- 54.0004
- 54.45
- 54.99
- 55
- 55.35
- 56
- 56.35
- 57
- 57.35
- 58.35
- 59.35
- 59.99
- 60
- 60/75
- 60.35
- 61.01
- 61.011
- 61.35
- 62
- ø62
- 62.35
- 62.992
- 63
- 63.35
- 63.5
- 63.98
- 64
- 64.35
- 64.7954
- 65
- 65.35
- 66.35
- 67.35
- 67.894
- 68
- 68.35
- 69
- 69.35
- 70
- 70/90
- 70.35
- 71.35
- 72
- 72.35
- 73.35
- 74.35
- 75
- 75.01
- 75.35
- 76.35
- 77.013
- 77.35
- 78.35
- 79.35
- 80
- 80.01
- 80.35
- 81.35
- 82.35
- 82.499
- 83
- 83.35
- 84.35
- 85
- 85.35
- 86
- 86.35
- 87.35
- ø88
- 88.35
- 89
- 89.35
- 90
- 90.35
- 98
- 99
- 99.9998
- 100
- 105
- 106
- 109
- 111.35
- 115
- 119.9896
- 120
- 123
- ø125
- 130
- 132.35
- 135
- 136
- 139.7
- 140
- 145
- 148
- 150
- 153.35
- 166
- 170
- 172.72
- 188
- 198
- 212
- 220
- 223.52
- 228
- 248
- 250
- 258
- 275
- 279.4
- 298
- 378
- 458
- 538
- 778
- 1018
-
Application
- Internal Diameter
- Inner diameter profiling
- Pull
-
Cutting Direction
- Right-hand
- Left-hand
- IKOU
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
- 5°
- 7°
- 20°
- 0°
- 11°
-
Shank diameter
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Brand
-
- SANDVIK (66)
- KYOCERA (19)
- SHOWA TOOL (0)
- MANYO TOOLS (0)
- NGK SPARK PLUG (0)
- THE CUT (0)
- BIG KAISER (0)
CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for I.D. Tuning
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.